|  | 
 | /* png.c - location for general purpose libpng functions | 
 |  * | 
 |  * Copyright (c) 2018-2019 Cosmin Truta | 
 |  * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson | 
 |  * Copyright (c) 1996-1997 Andreas Dilger | 
 |  * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. | 
 |  * | 
 |  * This code is released under the libpng license. | 
 |  * For conditions of distribution and use, see the disclaimer | 
 |  * and license in png.h | 
 |  */ | 
 |  | 
 | #include "pngpriv.h" | 
 |  | 
 | /* Generate a compiler error if there is an old png.h in the search path. */ | 
 | typedef png_libpng_version_1_6_37 Your_png_h_is_not_version_1_6_37; | 
 |  | 
 | #ifdef __GNUC__ | 
 | /* The version tests may need to be added to, but the problem warning has | 
 |  * consistently been fixed in GCC versions which obtain wide-spread release. | 
 |  * The problem is that many versions of GCC rearrange comparison expressions in | 
 |  * the optimizer in such a way that the results of the comparison will change | 
 |  * if signed integer overflow occurs.  Such comparisons are not permitted in | 
 |  * ANSI C90, however GCC isn't clever enough to work out that that do not occur | 
 |  * below in png_ascii_from_fp and png_muldiv, so it produces a warning with | 
 |  * -Wextra.  Unfortunately this is highly dependent on the optimizer and the | 
 |  * machine architecture so the warning comes and goes unpredictably and is | 
 |  * impossible to "fix", even were that a good idea. | 
 |  */ | 
 | #if __GNUC__ == 7 && __GNUC_MINOR__ == 1 | 
 | #define GCC_STRICT_OVERFLOW 1 | 
 | #endif /* GNU 7.1.x */ | 
 | #endif /* GNU */ | 
 | #ifndef GCC_STRICT_OVERFLOW | 
 | #define GCC_STRICT_OVERFLOW 0 | 
 | #endif | 
 |  | 
 | /* Tells libpng that we have already handled the first "num_bytes" bytes | 
 |  * of the PNG file signature.  If the PNG data is embedded into another | 
 |  * stream we can set num_bytes = 8 so that libpng will not attempt to read | 
 |  * or write any of the magic bytes before it starts on the IHDR. | 
 |  */ | 
 |  | 
 | #ifdef PNG_READ_SUPPORTED | 
 | void PNGAPI | 
 | png_set_sig_bytes(png_structrp png_ptr, int num_bytes) | 
 | { | 
 |    unsigned int nb = (unsigned int)num_bytes; | 
 |  | 
 |    png_debug(1, "in png_set_sig_bytes"); | 
 |  | 
 |    if (png_ptr == NULL) | 
 |       return; | 
 |  | 
 |    if (num_bytes < 0) | 
 |       nb = 0; | 
 |  | 
 |    if (nb > 8) | 
 |       png_error(png_ptr, "Too many bytes for PNG signature"); | 
 |  | 
 |    png_ptr->sig_bytes = (png_byte)nb; | 
 | } | 
 |  | 
 | /* Checks whether the supplied bytes match the PNG signature.  We allow | 
 |  * checking less than the full 8-byte signature so that those apps that | 
 |  * already read the first few bytes of a file to determine the file type | 
 |  * can simply check the remaining bytes for extra assurance.  Returns | 
 |  * an integer less than, equal to, or greater than zero if sig is found, | 
 |  * respectively, to be less than, to match, or be greater than the correct | 
 |  * PNG signature (this is the same behavior as strcmp, memcmp, etc). | 
 |  */ | 
 | int PNGAPI | 
 | png_sig_cmp(png_const_bytep sig, size_t start, size_t num_to_check) | 
 | { | 
 |    png_byte png_signature[8] = {137, 80, 78, 71, 13, 10, 26, 10}; | 
 |  | 
 |    if (num_to_check > 8) | 
 |       num_to_check = 8; | 
 |  | 
 |    else if (num_to_check < 1) | 
 |       return (-1); | 
 |  | 
 |    if (start > 7) | 
 |       return (-1); | 
 |  | 
 |    if (start + num_to_check > 8) | 
 |       num_to_check = 8 - start; | 
 |  | 
 |    return ((int)(memcmp(&sig[start], &png_signature[start], num_to_check))); | 
 | } | 
 |  | 
 | #endif /* READ */ | 
 |  | 
 | #if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) | 
 | /* Function to allocate memory for zlib */ | 
 | PNG_FUNCTION(voidpf /* PRIVATE */, | 
 | png_zalloc,(voidpf png_ptr, uInt items, uInt size),PNG_ALLOCATED) | 
 | { | 
 |    png_alloc_size_t num_bytes = size; | 
 |  | 
 |    if (png_ptr == NULL) | 
 |       return NULL; | 
 |  | 
 |    if (items >= (~(png_alloc_size_t)0)/size) | 
 |    { | 
 |       png_warning (png_voidcast(png_structrp, png_ptr), | 
 |           "Potential overflow in png_zalloc()"); | 
 |       return NULL; | 
 |    } | 
 |  | 
 |    num_bytes *= items; | 
 |    return png_malloc_warn(png_voidcast(png_structrp, png_ptr), num_bytes); | 
 | } | 
 |  | 
 | /* Function to free memory for zlib */ | 
 | void /* PRIVATE */ | 
 | png_zfree(voidpf png_ptr, voidpf ptr) | 
 | { | 
 |    png_free(png_voidcast(png_const_structrp,png_ptr), ptr); | 
 | } | 
 |  | 
 | /* Reset the CRC variable to 32 bits of 1's.  Care must be taken | 
 |  * in case CRC is > 32 bits to leave the top bits 0. | 
 |  */ | 
 | void /* PRIVATE */ | 
 | png_reset_crc(png_structrp png_ptr) | 
 | { | 
 |    /* The cast is safe because the crc is a 32-bit value. */ | 
 |    png_ptr->crc = (png_uint_32)crc32(0, Z_NULL, 0); | 
 | } | 
 |  | 
 | /* Calculate the CRC over a section of data.  We can only pass as | 
 |  * much data to this routine as the largest single buffer size.  We | 
 |  * also check that this data will actually be used before going to the | 
 |  * trouble of calculating it. | 
 |  */ | 
 | void /* PRIVATE */ | 
 | png_calculate_crc(png_structrp png_ptr, png_const_bytep ptr, size_t length) | 
 | { | 
 |    int need_crc = 1; | 
 |  | 
 |    if (PNG_CHUNK_ANCILLARY(png_ptr->chunk_name) != 0) | 
 |    { | 
 |       if ((png_ptr->flags & PNG_FLAG_CRC_ANCILLARY_MASK) == | 
 |           (PNG_FLAG_CRC_ANCILLARY_USE | PNG_FLAG_CRC_ANCILLARY_NOWARN)) | 
 |          need_crc = 0; | 
 |    } | 
 |  | 
 |    else /* critical */ | 
 |    { | 
 |       if ((png_ptr->flags & PNG_FLAG_CRC_CRITICAL_IGNORE) != 0) | 
 |          need_crc = 0; | 
 |    } | 
 |  | 
 |    /* 'uLong' is defined in zlib.h as unsigned long; this means that on some | 
 |     * systems it is a 64-bit value.  crc32, however, returns 32 bits so the | 
 |     * following cast is safe.  'uInt' may be no more than 16 bits, so it is | 
 |     * necessary to perform a loop here. | 
 |     */ | 
 |    if (need_crc != 0 && length > 0) | 
 |    { | 
 |       uLong crc = png_ptr->crc; /* Should never issue a warning */ | 
 |  | 
 |       do | 
 |       { | 
 |          uInt safe_length = (uInt)length; | 
 | #ifndef __COVERITY__ | 
 |          if (safe_length == 0) | 
 |             safe_length = (uInt)-1; /* evil, but safe */ | 
 | #endif | 
 |  | 
 |          crc = crc32(crc, ptr, safe_length); | 
 |  | 
 |          /* The following should never issue compiler warnings; if they do the | 
 |           * target system has characteristics that will probably violate other | 
 |           * assumptions within the libpng code. | 
 |           */ | 
 |          ptr += safe_length; | 
 |          length -= safe_length; | 
 |       } | 
 |       while (length > 0); | 
 |  | 
 |       /* And the following is always safe because the crc is only 32 bits. */ | 
 |       png_ptr->crc = (png_uint_32)crc; | 
 |    } | 
 | } | 
 |  | 
 | /* Check a user supplied version number, called from both read and write | 
 |  * functions that create a png_struct. | 
 |  */ | 
 | int | 
 | png_user_version_check(png_structrp png_ptr, png_const_charp user_png_ver) | 
 | { | 
 |    /* Libpng versions 1.0.0 and later are binary compatible if the version | 
 |     * string matches through the second '.'; we must recompile any | 
 |     * applications that use any older library version. | 
 |     */ | 
 |  | 
 |    if (user_png_ver != NULL) | 
 |    { | 
 |       int i = -1; | 
 |       int found_dots = 0; | 
 |  | 
 |       do | 
 |       { | 
 |          i++; | 
 |          if (user_png_ver[i] != PNG_LIBPNG_VER_STRING[i]) | 
 |             png_ptr->flags |= PNG_FLAG_LIBRARY_MISMATCH; | 
 |          if (user_png_ver[i] == '.') | 
 |             found_dots++; | 
 |       } while (found_dots < 2 && user_png_ver[i] != 0 && | 
 |             PNG_LIBPNG_VER_STRING[i] != 0); | 
 |    } | 
 |  | 
 |    else | 
 |       png_ptr->flags |= PNG_FLAG_LIBRARY_MISMATCH; | 
 |  | 
 |    if ((png_ptr->flags & PNG_FLAG_LIBRARY_MISMATCH) != 0) | 
 |    { | 
 | #ifdef PNG_WARNINGS_SUPPORTED | 
 |       size_t pos = 0; | 
 |       char m[128]; | 
 |  | 
 |       pos = png_safecat(m, (sizeof m), pos, | 
 |           "Application built with libpng-"); | 
 |       pos = png_safecat(m, (sizeof m), pos, user_png_ver); | 
 |       pos = png_safecat(m, (sizeof m), pos, " but running with "); | 
 |       pos = png_safecat(m, (sizeof m), pos, PNG_LIBPNG_VER_STRING); | 
 |       PNG_UNUSED(pos) | 
 |  | 
 |       png_warning(png_ptr, m); | 
 | #endif | 
 |  | 
 | #ifdef PNG_ERROR_NUMBERS_SUPPORTED | 
 |       png_ptr->flags = 0; | 
 | #endif | 
 |  | 
 |       return 0; | 
 |    } | 
 |  | 
 |    /* Success return. */ | 
 |    return 1; | 
 | } | 
 |  | 
 | /* Generic function to create a png_struct for either read or write - this | 
 |  * contains the common initialization. | 
 |  */ | 
 | PNG_FUNCTION(png_structp /* PRIVATE */, | 
 | png_create_png_struct,(png_const_charp user_png_ver, png_voidp error_ptr, | 
 |     png_error_ptr error_fn, png_error_ptr warn_fn, png_voidp mem_ptr, | 
 |     png_malloc_ptr malloc_fn, png_free_ptr free_fn),PNG_ALLOCATED) | 
 | { | 
 |    png_struct create_struct; | 
 | #  ifdef PNG_SETJMP_SUPPORTED | 
 |       jmp_buf create_jmp_buf; | 
 | #  endif | 
 |  | 
 |    /* This temporary stack-allocated structure is used to provide a place to | 
 |     * build enough context to allow the user provided memory allocator (if any) | 
 |     * to be called. | 
 |     */ | 
 |    memset(&create_struct, 0, (sizeof create_struct)); | 
 |  | 
 |    /* Added at libpng-1.2.6 */ | 
 | #  ifdef PNG_USER_LIMITS_SUPPORTED | 
 |       create_struct.user_width_max = PNG_USER_WIDTH_MAX; | 
 |       create_struct.user_height_max = PNG_USER_HEIGHT_MAX; | 
 |  | 
 | #     ifdef PNG_USER_CHUNK_CACHE_MAX | 
 |       /* Added at libpng-1.2.43 and 1.4.0 */ | 
 |       create_struct.user_chunk_cache_max = PNG_USER_CHUNK_CACHE_MAX; | 
 | #     endif | 
 |  | 
 | #     ifdef PNG_USER_CHUNK_MALLOC_MAX | 
 |       /* Added at libpng-1.2.43 and 1.4.1, required only for read but exists | 
 |        * in png_struct regardless. | 
 |        */ | 
 |       create_struct.user_chunk_malloc_max = PNG_USER_CHUNK_MALLOC_MAX; | 
 | #     endif | 
 | #  endif | 
 |  | 
 |    /* The following two API calls simply set fields in png_struct, so it is safe | 
 |     * to do them now even though error handling is not yet set up. | 
 |     */ | 
 | #  ifdef PNG_USER_MEM_SUPPORTED | 
 |       png_set_mem_fn(&create_struct, mem_ptr, malloc_fn, free_fn); | 
 | #  else | 
 |       PNG_UNUSED(mem_ptr) | 
 |       PNG_UNUSED(malloc_fn) | 
 |       PNG_UNUSED(free_fn) | 
 | #  endif | 
 |  | 
 |    /* (*error_fn) can return control to the caller after the error_ptr is set, | 
 |     * this will result in a memory leak unless the error_fn does something | 
 |     * extremely sophisticated.  The design lacks merit but is implicit in the | 
 |     * API. | 
 |     */ | 
 |    png_set_error_fn(&create_struct, error_ptr, error_fn, warn_fn); | 
 |  | 
 | #  ifdef PNG_SETJMP_SUPPORTED | 
 |       if (!setjmp(create_jmp_buf)) | 
 | #  endif | 
 |       { | 
 | #  ifdef PNG_SETJMP_SUPPORTED | 
 |          /* Temporarily fake out the longjmp information until we have | 
 |           * successfully completed this function.  This only works if we have | 
 |           * setjmp() support compiled in, but it is safe - this stuff should | 
 |           * never happen. | 
 |           */ | 
 |          create_struct.jmp_buf_ptr = &create_jmp_buf; | 
 |          create_struct.jmp_buf_size = 0; /*stack allocation*/ | 
 |          create_struct.longjmp_fn = longjmp; | 
 | #  endif | 
 |          /* Call the general version checker (shared with read and write code): | 
 |           */ | 
 |          if (png_user_version_check(&create_struct, user_png_ver) != 0) | 
 |          { | 
 |             png_structrp png_ptr = png_voidcast(png_structrp, | 
 |                 png_malloc_warn(&create_struct, (sizeof *png_ptr))); | 
 |  | 
 |             if (png_ptr != NULL) | 
 |             { | 
 |                /* png_ptr->zstream holds a back-pointer to the png_struct, so | 
 |                 * this can only be done now: | 
 |                 */ | 
 |                create_struct.zstream.zalloc = png_zalloc; | 
 |                create_struct.zstream.zfree = png_zfree; | 
 |                create_struct.zstream.opaque = png_ptr; | 
 |  | 
 | #              ifdef PNG_SETJMP_SUPPORTED | 
 |                /* Eliminate the local error handling: */ | 
 |                create_struct.jmp_buf_ptr = NULL; | 
 |                create_struct.jmp_buf_size = 0; | 
 |                create_struct.longjmp_fn = 0; | 
 | #              endif | 
 |  | 
 |                *png_ptr = create_struct; | 
 |  | 
 |                /* This is the successful return point */ | 
 |                return png_ptr; | 
 |             } | 
 |          } | 
 |       } | 
 |  | 
 |    /* A longjmp because of a bug in the application storage allocator or a | 
 |     * simple failure to allocate the png_struct. | 
 |     */ | 
 |    return NULL; | 
 | } | 
 |  | 
 | /* Allocate the memory for an info_struct for the application. */ | 
 | PNG_FUNCTION(png_infop,PNGAPI | 
 | png_create_info_struct,(png_const_structrp png_ptr),PNG_ALLOCATED) | 
 | { | 
 |    png_inforp info_ptr; | 
 |  | 
 |    png_debug(1, "in png_create_info_struct"); | 
 |  | 
 |    if (png_ptr == NULL) | 
 |       return NULL; | 
 |  | 
 |    /* Use the internal API that does not (or at least should not) error out, so | 
 |     * that this call always returns ok.  The application typically sets up the | 
 |     * error handling *after* creating the info_struct because this is the way it | 
 |     * has always been done in 'example.c'. | 
 |     */ | 
 |    info_ptr = png_voidcast(png_inforp, png_malloc_base(png_ptr, | 
 |        (sizeof *info_ptr))); | 
 |  | 
 |    if (info_ptr != NULL) | 
 |       memset(info_ptr, 0, (sizeof *info_ptr)); | 
 |  | 
 |    return info_ptr; | 
 | } | 
 |  | 
 | /* This function frees the memory associated with a single info struct. | 
 |  * Normally, one would use either png_destroy_read_struct() or | 
 |  * png_destroy_write_struct() to free an info struct, but this may be | 
 |  * useful for some applications.  From libpng 1.6.0 this function is also used | 
 |  * internally to implement the png_info release part of the 'struct' destroy | 
 |  * APIs.  This ensures that all possible approaches free the same data (all of | 
 |  * it). | 
 |  */ | 
 | void PNGAPI | 
 | png_destroy_info_struct(png_const_structrp png_ptr, png_infopp info_ptr_ptr) | 
 | { | 
 |    png_inforp info_ptr = NULL; | 
 |  | 
 |    png_debug(1, "in png_destroy_info_struct"); | 
 |  | 
 |    if (png_ptr == NULL) | 
 |       return; | 
 |  | 
 |    if (info_ptr_ptr != NULL) | 
 |       info_ptr = *info_ptr_ptr; | 
 |  | 
 |    if (info_ptr != NULL) | 
 |    { | 
 |       /* Do this first in case of an error below; if the app implements its own | 
 |        * memory management this can lead to png_free calling png_error, which | 
 |        * will abort this routine and return control to the app error handler. | 
 |        * An infinite loop may result if it then tries to free the same info | 
 |        * ptr. | 
 |        */ | 
 |       *info_ptr_ptr = NULL; | 
 |  | 
 |       png_free_data(png_ptr, info_ptr, PNG_FREE_ALL, -1); | 
 |       memset(info_ptr, 0, (sizeof *info_ptr)); | 
 |       png_free(png_ptr, info_ptr); | 
 |    } | 
 | } | 
 |  | 
 | /* Initialize the info structure.  This is now an internal function (0.89) | 
 |  * and applications using it are urged to use png_create_info_struct() | 
 |  * instead.  Use deprecated in 1.6.0, internal use removed (used internally it | 
 |  * is just a memset). | 
 |  * | 
 |  * NOTE: it is almost inconceivable that this API is used because it bypasses | 
 |  * the user-memory mechanism and the user error handling/warning mechanisms in | 
 |  * those cases where it does anything other than a memset. | 
 |  */ | 
 | PNG_FUNCTION(void,PNGAPI | 
 | png_info_init_3,(png_infopp ptr_ptr, size_t png_info_struct_size), | 
 |     PNG_DEPRECATED) | 
 | { | 
 |    png_inforp info_ptr = *ptr_ptr; | 
 |  | 
 |    png_debug(1, "in png_info_init_3"); | 
 |  | 
 |    if (info_ptr == NULL) | 
 |       return; | 
 |  | 
 |    if ((sizeof (png_info)) > png_info_struct_size) | 
 |    { | 
 |       *ptr_ptr = NULL; | 
 |       /* The following line is why this API should not be used: */ | 
 |       free(info_ptr); | 
 |       info_ptr = png_voidcast(png_inforp, png_malloc_base(NULL, | 
 |           (sizeof *info_ptr))); | 
 |       if (info_ptr == NULL) | 
 |          return; | 
 |       *ptr_ptr = info_ptr; | 
 |    } | 
 |  | 
 |    /* Set everything to 0 */ | 
 |    memset(info_ptr, 0, (sizeof *info_ptr)); | 
 | } | 
 |  | 
 | /* The following API is not called internally */ | 
 | void PNGAPI | 
 | png_data_freer(png_const_structrp png_ptr, png_inforp info_ptr, | 
 |     int freer, png_uint_32 mask) | 
 | { | 
 |    png_debug(1, "in png_data_freer"); | 
 |  | 
 |    if (png_ptr == NULL || info_ptr == NULL) | 
 |       return; | 
 |  | 
 |    if (freer == PNG_DESTROY_WILL_FREE_DATA) | 
 |       info_ptr->free_me |= mask; | 
 |  | 
 |    else if (freer == PNG_USER_WILL_FREE_DATA) | 
 |       info_ptr->free_me &= ~mask; | 
 |  | 
 |    else | 
 |       png_error(png_ptr, "Unknown freer parameter in png_data_freer"); | 
 | } | 
 |  | 
 | void PNGAPI | 
 | png_free_data(png_const_structrp png_ptr, png_inforp info_ptr, png_uint_32 mask, | 
 |     int num) | 
 | { | 
 |    png_debug(1, "in png_free_data"); | 
 |  | 
 |    if (png_ptr == NULL || info_ptr == NULL) | 
 |       return; | 
 |  | 
 | #ifdef PNG_TEXT_SUPPORTED | 
 |    /* Free text item num or (if num == -1) all text items */ | 
 |    if (info_ptr->text != NULL && | 
 |        ((mask & PNG_FREE_TEXT) & info_ptr->free_me) != 0) | 
 |    { | 
 |       if (num != -1) | 
 |       { | 
 |          png_free(png_ptr, info_ptr->text[num].key); | 
 |          info_ptr->text[num].key = NULL; | 
 |       } | 
 |  | 
 |       else | 
 |       { | 
 |          int i; | 
 |  | 
 |          for (i = 0; i < info_ptr->num_text; i++) | 
 |             png_free(png_ptr, info_ptr->text[i].key); | 
 |  | 
 |          png_free(png_ptr, info_ptr->text); | 
 |          info_ptr->text = NULL; | 
 |          info_ptr->num_text = 0; | 
 |          info_ptr->max_text = 0; | 
 |       } | 
 |    } | 
 | #endif | 
 |  | 
 | #ifdef PNG_tRNS_SUPPORTED | 
 |    /* Free any tRNS entry */ | 
 |    if (((mask & PNG_FREE_TRNS) & info_ptr->free_me) != 0) | 
 |    { | 
 |       info_ptr->valid &= ~PNG_INFO_tRNS; | 
 |       png_free(png_ptr, info_ptr->trans_alpha); | 
 |       info_ptr->trans_alpha = NULL; | 
 |       info_ptr->num_trans = 0; | 
 |    } | 
 | #endif | 
 |  | 
 | #ifdef PNG_sCAL_SUPPORTED | 
 |    /* Free any sCAL entry */ | 
 |    if (((mask & PNG_FREE_SCAL) & info_ptr->free_me) != 0) | 
 |    { | 
 |       png_free(png_ptr, info_ptr->scal_s_width); | 
 |       png_free(png_ptr, info_ptr->scal_s_height); | 
 |       info_ptr->scal_s_width = NULL; | 
 |       info_ptr->scal_s_height = NULL; | 
 |       info_ptr->valid &= ~PNG_INFO_sCAL; | 
 |    } | 
 | #endif | 
 |  | 
 | #ifdef PNG_pCAL_SUPPORTED | 
 |    /* Free any pCAL entry */ | 
 |    if (((mask & PNG_FREE_PCAL) & info_ptr->free_me) != 0) | 
 |    { | 
 |       png_free(png_ptr, info_ptr->pcal_purpose); | 
 |       png_free(png_ptr, info_ptr->pcal_units); | 
 |       info_ptr->pcal_purpose = NULL; | 
 |       info_ptr->pcal_units = NULL; | 
 |  | 
 |       if (info_ptr->pcal_params != NULL) | 
 |          { | 
 |             int i; | 
 |  | 
 |             for (i = 0; i < info_ptr->pcal_nparams; i++) | 
 |                png_free(png_ptr, info_ptr->pcal_params[i]); | 
 |  | 
 |             png_free(png_ptr, info_ptr->pcal_params); | 
 |             info_ptr->pcal_params = NULL; | 
 |          } | 
 |       info_ptr->valid &= ~PNG_INFO_pCAL; | 
 |    } | 
 | #endif | 
 |  | 
 | #ifdef PNG_iCCP_SUPPORTED | 
 |    /* Free any profile entry */ | 
 |    if (((mask & PNG_FREE_ICCP) & info_ptr->free_me) != 0) | 
 |    { | 
 |       png_free(png_ptr, info_ptr->iccp_name); | 
 |       png_free(png_ptr, info_ptr->iccp_profile); | 
 |       info_ptr->iccp_name = NULL; | 
 |       info_ptr->iccp_profile = NULL; | 
 |       info_ptr->valid &= ~PNG_INFO_iCCP; | 
 |    } | 
 | #endif | 
 |  | 
 | #ifdef PNG_sPLT_SUPPORTED | 
 |    /* Free a given sPLT entry, or (if num == -1) all sPLT entries */ | 
 |    if (info_ptr->splt_palettes != NULL && | 
 |        ((mask & PNG_FREE_SPLT) & info_ptr->free_me) != 0) | 
 |    { | 
 |       if (num != -1) | 
 |       { | 
 |          png_free(png_ptr, info_ptr->splt_palettes[num].name); | 
 |          png_free(png_ptr, info_ptr->splt_palettes[num].entries); | 
 |          info_ptr->splt_palettes[num].name = NULL; | 
 |          info_ptr->splt_palettes[num].entries = NULL; | 
 |       } | 
 |  | 
 |       else | 
 |       { | 
 |          int i; | 
 |  | 
 |          for (i = 0; i < info_ptr->splt_palettes_num; i++) | 
 |          { | 
 |             png_free(png_ptr, info_ptr->splt_palettes[i].name); | 
 |             png_free(png_ptr, info_ptr->splt_palettes[i].entries); | 
 |          } | 
 |  | 
 |          png_free(png_ptr, info_ptr->splt_palettes); | 
 |          info_ptr->splt_palettes = NULL; | 
 |          info_ptr->splt_palettes_num = 0; | 
 |          info_ptr->valid &= ~PNG_INFO_sPLT; | 
 |       } | 
 |    } | 
 | #endif | 
 |  | 
 | #ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED | 
 |    if (info_ptr->unknown_chunks != NULL && | 
 |        ((mask & PNG_FREE_UNKN) & info_ptr->free_me) != 0) | 
 |    { | 
 |       if (num != -1) | 
 |       { | 
 |           png_free(png_ptr, info_ptr->unknown_chunks[num].data); | 
 |           info_ptr->unknown_chunks[num].data = NULL; | 
 |       } | 
 |  | 
 |       else | 
 |       { | 
 |          int i; | 
 |  | 
 |          for (i = 0; i < info_ptr->unknown_chunks_num; i++) | 
 |             png_free(png_ptr, info_ptr->unknown_chunks[i].data); | 
 |  | 
 |          png_free(png_ptr, info_ptr->unknown_chunks); | 
 |          info_ptr->unknown_chunks = NULL; | 
 |          info_ptr->unknown_chunks_num = 0; | 
 |       } | 
 |    } | 
 | #endif | 
 |  | 
 | #ifdef PNG_eXIf_SUPPORTED | 
 |    /* Free any eXIf entry */ | 
 |    if (((mask & PNG_FREE_EXIF) & info_ptr->free_me) != 0) | 
 |    { | 
 | # ifdef PNG_READ_eXIf_SUPPORTED | 
 |       if (info_ptr->eXIf_buf) | 
 |       { | 
 |          png_free(png_ptr, info_ptr->eXIf_buf); | 
 |          info_ptr->eXIf_buf = NULL; | 
 |       } | 
 | # endif | 
 |       if (info_ptr->exif) | 
 |       { | 
 |          png_free(png_ptr, info_ptr->exif); | 
 |          info_ptr->exif = NULL; | 
 |       } | 
 |       info_ptr->valid &= ~PNG_INFO_eXIf; | 
 |    } | 
 | #endif | 
 |  | 
 | #ifdef PNG_hIST_SUPPORTED | 
 |    /* Free any hIST entry */ | 
 |    if (((mask & PNG_FREE_HIST) & info_ptr->free_me) != 0) | 
 |    { | 
 |       png_free(png_ptr, info_ptr->hist); | 
 |       info_ptr->hist = NULL; | 
 |       info_ptr->valid &= ~PNG_INFO_hIST; | 
 |    } | 
 | #endif | 
 |  | 
 |    /* Free any PLTE entry that was internally allocated */ | 
 |    if (((mask & PNG_FREE_PLTE) & info_ptr->free_me) != 0) | 
 |    { | 
 |       png_free(png_ptr, info_ptr->palette); | 
 |       info_ptr->palette = NULL; | 
 |       info_ptr->valid &= ~PNG_INFO_PLTE; | 
 |       info_ptr->num_palette = 0; | 
 |    } | 
 |  | 
 | #ifdef PNG_INFO_IMAGE_SUPPORTED | 
 |    /* Free any image bits attached to the info structure */ | 
 |    if (((mask & PNG_FREE_ROWS) & info_ptr->free_me) != 0) | 
 |    { | 
 |       if (info_ptr->row_pointers != NULL) | 
 |       { | 
 |          png_uint_32 row; | 
 |          for (row = 0; row < info_ptr->height; row++) | 
 |             png_free(png_ptr, info_ptr->row_pointers[row]); | 
 |  | 
 |          png_free(png_ptr, info_ptr->row_pointers); | 
 |          info_ptr->row_pointers = NULL; | 
 |       } | 
 |       info_ptr->valid &= ~PNG_INFO_IDAT; | 
 |    } | 
 | #endif | 
 |  | 
 |    if (num != -1) | 
 |       mask &= ~PNG_FREE_MUL; | 
 |  | 
 |    info_ptr->free_me &= ~mask; | 
 | } | 
 | #endif /* READ || WRITE */ | 
 |  | 
 | /* This function returns a pointer to the io_ptr associated with the user | 
 |  * functions.  The application should free any memory associated with this | 
 |  * pointer before png_write_destroy() or png_read_destroy() are called. | 
 |  */ | 
 | png_voidp PNGAPI | 
 | png_get_io_ptr(png_const_structrp png_ptr) | 
 | { | 
 |    if (png_ptr == NULL) | 
 |       return (NULL); | 
 |  | 
 |    return (png_ptr->io_ptr); | 
 | } | 
 |  | 
 | #if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) | 
 | #  ifdef PNG_STDIO_SUPPORTED | 
 | /* Initialize the default input/output functions for the PNG file.  If you | 
 |  * use your own read or write routines, you can call either png_set_read_fn() | 
 |  * or png_set_write_fn() instead of png_init_io().  If you have defined | 
 |  * PNG_NO_STDIO or otherwise disabled PNG_STDIO_SUPPORTED, you must use a | 
 |  * function of your own because "FILE *" isn't necessarily available. | 
 |  */ | 
 | void PNGAPI | 
 | png_init_io(png_structrp png_ptr, png_FILE_p fp) | 
 | { | 
 |    png_debug(1, "in png_init_io"); | 
 |  | 
 |    if (png_ptr == NULL) | 
 |       return; | 
 |  | 
 |    png_ptr->io_ptr = (png_voidp)fp; | 
 | } | 
 | #  endif | 
 |  | 
 | #  ifdef PNG_SAVE_INT_32_SUPPORTED | 
 | /* PNG signed integers are saved in 32-bit 2's complement format.  ANSI C-90 | 
 |  * defines a cast of a signed integer to an unsigned integer either to preserve | 
 |  * the value, if it is positive, or to calculate: | 
 |  * | 
 |  *     (UNSIGNED_MAX+1) + integer | 
 |  * | 
 |  * Where UNSIGNED_MAX is the appropriate maximum unsigned value, so when the | 
 |  * negative integral value is added the result will be an unsigned value | 
 |  * correspnding to the 2's complement representation. | 
 |  */ | 
 | void PNGAPI | 
 | png_save_int_32(png_bytep buf, png_int_32 i) | 
 | { | 
 |    png_save_uint_32(buf, (png_uint_32)i); | 
 | } | 
 | #  endif | 
 |  | 
 | #  ifdef PNG_TIME_RFC1123_SUPPORTED | 
 | /* Convert the supplied time into an RFC 1123 string suitable for use in | 
 |  * a "Creation Time" or other text-based time string. | 
 |  */ | 
 | int PNGAPI | 
 | png_convert_to_rfc1123_buffer(char out[29], png_const_timep ptime) | 
 | { | 
 |    static const char short_months[12][4] = | 
 |         {"Jan", "Feb", "Mar", "Apr", "May", "Jun", | 
 |          "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"}; | 
 |  | 
 |    if (out == NULL) | 
 |       return 0; | 
 |  | 
 |    if (ptime->year > 9999 /* RFC1123 limitation */ || | 
 |        ptime->month == 0    ||  ptime->month > 12  || | 
 |        ptime->day   == 0    ||  ptime->day   > 31  || | 
 |        ptime->hour  > 23    ||  ptime->minute > 59 || | 
 |        ptime->second > 60) | 
 |       return 0; | 
 |  | 
 |    { | 
 |       size_t pos = 0; | 
 |       char number_buf[5]; /* enough for a four-digit year */ | 
 |  | 
 | #     define APPEND_STRING(string) pos = png_safecat(out, 29, pos, (string)) | 
 | #     define APPEND_NUMBER(format, value)\ | 
 |          APPEND_STRING(PNG_FORMAT_NUMBER(number_buf, format, (value))) | 
 | #     define APPEND(ch) if (pos < 28) out[pos++] = (ch) | 
 |  | 
 |       APPEND_NUMBER(PNG_NUMBER_FORMAT_u, (unsigned)ptime->day); | 
 |       APPEND(' '); | 
 |       APPEND_STRING(short_months[(ptime->month - 1)]); | 
 |       APPEND(' '); | 
 |       APPEND_NUMBER(PNG_NUMBER_FORMAT_u, ptime->year); | 
 |       APPEND(' '); | 
 |       APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->hour); | 
 |       APPEND(':'); | 
 |       APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->minute); | 
 |       APPEND(':'); | 
 |       APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->second); | 
 |       APPEND_STRING(" +0000"); /* This reliably terminates the buffer */ | 
 |       PNG_UNUSED (pos) | 
 |  | 
 | #     undef APPEND | 
 | #     undef APPEND_NUMBER | 
 | #     undef APPEND_STRING | 
 |    } | 
 |  | 
 |    return 1; | 
 | } | 
 |  | 
 | #    if PNG_LIBPNG_VER < 10700 | 
 | /* To do: remove the following from libpng-1.7 */ | 
 | /* Original API that uses a private buffer in png_struct. | 
 |  * Deprecated because it causes png_struct to carry a spurious temporary | 
 |  * buffer (png_struct::time_buffer), better to have the caller pass this in. | 
 |  */ | 
 | png_const_charp PNGAPI | 
 | png_convert_to_rfc1123(png_structrp png_ptr, png_const_timep ptime) | 
 | { | 
 |    if (png_ptr != NULL) | 
 |    { | 
 |       /* The only failure above if png_ptr != NULL is from an invalid ptime */ | 
 |       if (png_convert_to_rfc1123_buffer(png_ptr->time_buffer, ptime) == 0) | 
 |          png_warning(png_ptr, "Ignoring invalid time value"); | 
 |  | 
 |       else | 
 |          return png_ptr->time_buffer; | 
 |    } | 
 |  | 
 |    return NULL; | 
 | } | 
 | #    endif /* LIBPNG_VER < 10700 */ | 
 | #  endif /* TIME_RFC1123 */ | 
 |  | 
 | #endif /* READ || WRITE */ | 
 |  | 
 | png_const_charp PNGAPI | 
 | png_get_copyright(png_const_structrp png_ptr) | 
 | { | 
 |    PNG_UNUSED(png_ptr)  /* Silence compiler warning about unused png_ptr */ | 
 | #ifdef PNG_STRING_COPYRIGHT | 
 |    return PNG_STRING_COPYRIGHT | 
 | #else | 
 |    return PNG_STRING_NEWLINE \ | 
 |       "libpng version 1.6.37" PNG_STRING_NEWLINE \ | 
 |       "Copyright (c) 2018-2019 Cosmin Truta" PNG_STRING_NEWLINE \ | 
 |       "Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson" \ | 
 |       PNG_STRING_NEWLINE \ | 
 |       "Copyright (c) 1996-1997 Andreas Dilger" PNG_STRING_NEWLINE \ | 
 |       "Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc." \ | 
 |       PNG_STRING_NEWLINE; | 
 | #endif | 
 | } | 
 |  | 
 | /* The following return the library version as a short string in the | 
 |  * format 1.0.0 through 99.99.99zz.  To get the version of *.h files | 
 |  * used with your application, print out PNG_LIBPNG_VER_STRING, which | 
 |  * is defined in png.h. | 
 |  * Note: now there is no difference between png_get_libpng_ver() and | 
 |  * png_get_header_ver().  Due to the version_nn_nn_nn typedef guard, | 
 |  * it is guaranteed that png.c uses the correct version of png.h. | 
 |  */ | 
 | png_const_charp PNGAPI | 
 | png_get_libpng_ver(png_const_structrp png_ptr) | 
 | { | 
 |    /* Version of *.c files used when building libpng */ | 
 |    return png_get_header_ver(png_ptr); | 
 | } | 
 |  | 
 | png_const_charp PNGAPI | 
 | png_get_header_ver(png_const_structrp png_ptr) | 
 | { | 
 |    /* Version of *.h files used when building libpng */ | 
 |    PNG_UNUSED(png_ptr)  /* Silence compiler warning about unused png_ptr */ | 
 |    return PNG_LIBPNG_VER_STRING; | 
 | } | 
 |  | 
 | png_const_charp PNGAPI | 
 | png_get_header_version(png_const_structrp png_ptr) | 
 | { | 
 |    /* Returns longer string containing both version and date */ | 
 |    PNG_UNUSED(png_ptr)  /* Silence compiler warning about unused png_ptr */ | 
 | #ifdef __STDC__ | 
 |    return PNG_HEADER_VERSION_STRING | 
 | #  ifndef PNG_READ_SUPPORTED | 
 |       " (NO READ SUPPORT)" | 
 | #  endif | 
 |       PNG_STRING_NEWLINE; | 
 | #else | 
 |    return PNG_HEADER_VERSION_STRING; | 
 | #endif | 
 | } | 
 |  | 
 | #ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED | 
 | /* NOTE: this routine is not used internally! */ | 
 | /* Build a grayscale palette.  Palette is assumed to be 1 << bit_depth | 
 |  * large of png_color.  This lets grayscale images be treated as | 
 |  * paletted.  Most useful for gamma correction and simplification | 
 |  * of code.  This API is not used internally. | 
 |  */ | 
 | void PNGAPI | 
 | png_build_grayscale_palette(int bit_depth, png_colorp palette) | 
 | { | 
 |    int num_palette; | 
 |    int color_inc; | 
 |    int i; | 
 |    int v; | 
 |  | 
 |    png_debug(1, "in png_do_build_grayscale_palette"); | 
 |  | 
 |    if (palette == NULL) | 
 |       return; | 
 |  | 
 |    switch (bit_depth) | 
 |    { | 
 |       case 1: | 
 |          num_palette = 2; | 
 |          color_inc = 0xff; | 
 |          break; | 
 |  | 
 |       case 2: | 
 |          num_palette = 4; | 
 |          color_inc = 0x55; | 
 |          break; | 
 |  | 
 |       case 4: | 
 |          num_palette = 16; | 
 |          color_inc = 0x11; | 
 |          break; | 
 |  | 
 |       case 8: | 
 |          num_palette = 256; | 
 |          color_inc = 1; | 
 |          break; | 
 |  | 
 |       default: | 
 |          num_palette = 0; | 
 |          color_inc = 0; | 
 |          break; | 
 |    } | 
 |  | 
 |    for (i = 0, v = 0; i < num_palette; i++, v += color_inc) | 
 |    { | 
 |       palette[i].red = (png_byte)(v & 0xff); | 
 |       palette[i].green = (png_byte)(v & 0xff); | 
 |       palette[i].blue = (png_byte)(v & 0xff); | 
 |    } | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED | 
 | int PNGAPI | 
 | png_handle_as_unknown(png_const_structrp png_ptr, png_const_bytep chunk_name) | 
 | { | 
 |    /* Check chunk_name and return "keep" value if it's on the list, else 0 */ | 
 |    png_const_bytep p, p_end; | 
 |  | 
 |    if (png_ptr == NULL || chunk_name == NULL || png_ptr->num_chunk_list == 0) | 
 |       return PNG_HANDLE_CHUNK_AS_DEFAULT; | 
 |  | 
 |    p_end = png_ptr->chunk_list; | 
 |    p = p_end + png_ptr->num_chunk_list*5; /* beyond end */ | 
 |  | 
 |    /* The code is the fifth byte after each four byte string.  Historically this | 
 |     * code was always searched from the end of the list, this is no longer | 
 |     * necessary because the 'set' routine handles duplicate entries correctly. | 
 |     */ | 
 |    do /* num_chunk_list > 0, so at least one */ | 
 |    { | 
 |       p -= 5; | 
 |  | 
 |       if (memcmp(chunk_name, p, 4) == 0) | 
 |          return p[4]; | 
 |    } | 
 |    while (p > p_end); | 
 |  | 
 |    /* This means that known chunks should be processed and unknown chunks should | 
 |     * be handled according to the value of png_ptr->unknown_default; this can be | 
 |     * confusing because, as a result, there are two levels of defaulting for | 
 |     * unknown chunks. | 
 |     */ | 
 |    return PNG_HANDLE_CHUNK_AS_DEFAULT; | 
 | } | 
 |  | 
 | #if defined(PNG_READ_UNKNOWN_CHUNKS_SUPPORTED) ||\ | 
 |    defined(PNG_HANDLE_AS_UNKNOWN_SUPPORTED) | 
 | int /* PRIVATE */ | 
 | png_chunk_unknown_handling(png_const_structrp png_ptr, png_uint_32 chunk_name) | 
 | { | 
 |    png_byte chunk_string[5]; | 
 |  | 
 |    PNG_CSTRING_FROM_CHUNK(chunk_string, chunk_name); | 
 |    return png_handle_as_unknown(png_ptr, chunk_string); | 
 | } | 
 | #endif /* READ_UNKNOWN_CHUNKS || HANDLE_AS_UNKNOWN */ | 
 | #endif /* SET_UNKNOWN_CHUNKS */ | 
 |  | 
 | #ifdef PNG_READ_SUPPORTED | 
 | /* This function, added to libpng-1.0.6g, is untested. */ | 
 | int PNGAPI | 
 | png_reset_zstream(png_structrp png_ptr) | 
 | { | 
 |    if (png_ptr == NULL) | 
 |       return Z_STREAM_ERROR; | 
 |  | 
 |    /* WARNING: this resets the window bits to the maximum! */ | 
 |    return (inflateReset(&png_ptr->zstream)); | 
 | } | 
 | #endif /* READ */ | 
 |  | 
 | /* This function was added to libpng-1.0.7 */ | 
 | png_uint_32 PNGAPI | 
 | png_access_version_number(void) | 
 | { | 
 |    /* Version of *.c files used when building libpng */ | 
 |    return((png_uint_32)PNG_LIBPNG_VER); | 
 | } | 
 |  | 
 | #if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) | 
 | /* Ensure that png_ptr->zstream.msg holds some appropriate error message string. | 
 |  * If it doesn't 'ret' is used to set it to something appropriate, even in cases | 
 |  * like Z_OK or Z_STREAM_END where the error code is apparently a success code. | 
 |  */ | 
 | void /* PRIVATE */ | 
 | png_zstream_error(png_structrp png_ptr, int ret) | 
 | { | 
 |    /* Translate 'ret' into an appropriate error string, priority is given to the | 
 |     * one in zstream if set.  This always returns a string, even in cases like | 
 |     * Z_OK or Z_STREAM_END where the error code is a success code. | 
 |     */ | 
 |    if (png_ptr->zstream.msg == NULL) switch (ret) | 
 |    { | 
 |       default: | 
 |       case Z_OK: | 
 |          png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected zlib return code"); | 
 |          break; | 
 |  | 
 |       case Z_STREAM_END: | 
 |          /* Normal exit */ | 
 |          png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected end of LZ stream"); | 
 |          break; | 
 |  | 
 |       case Z_NEED_DICT: | 
 |          /* This means the deflate stream did not have a dictionary; this | 
 |           * indicates a bogus PNG. | 
 |           */ | 
 |          png_ptr->zstream.msg = PNGZ_MSG_CAST("missing LZ dictionary"); | 
 |          break; | 
 |  | 
 |       case Z_ERRNO: | 
 |          /* gz APIs only: should not happen */ | 
 |          png_ptr->zstream.msg = PNGZ_MSG_CAST("zlib IO error"); | 
 |          break; | 
 |  | 
 |       case Z_STREAM_ERROR: | 
 |          /* internal libpng error */ | 
 |          png_ptr->zstream.msg = PNGZ_MSG_CAST("bad parameters to zlib"); | 
 |          break; | 
 |  | 
 |       case Z_DATA_ERROR: | 
 |          png_ptr->zstream.msg = PNGZ_MSG_CAST("damaged LZ stream"); | 
 |          break; | 
 |  | 
 |       case Z_MEM_ERROR: | 
 |          png_ptr->zstream.msg = PNGZ_MSG_CAST("insufficient memory"); | 
 |          break; | 
 |  | 
 |       case Z_BUF_ERROR: | 
 |          /* End of input or output; not a problem if the caller is doing | 
 |           * incremental read or write. | 
 |           */ | 
 |          png_ptr->zstream.msg = PNGZ_MSG_CAST("truncated"); | 
 |          break; | 
 |  | 
 |       case Z_VERSION_ERROR: | 
 |          png_ptr->zstream.msg = PNGZ_MSG_CAST("unsupported zlib version"); | 
 |          break; | 
 |  | 
 |       case PNG_UNEXPECTED_ZLIB_RETURN: | 
 |          /* Compile errors here mean that zlib now uses the value co-opted in | 
 |           * pngpriv.h for PNG_UNEXPECTED_ZLIB_RETURN; update the switch above | 
 |           * and change pngpriv.h.  Note that this message is "... return", | 
 |           * whereas the default/Z_OK one is "... return code". | 
 |           */ | 
 |          png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected zlib return"); | 
 |          break; | 
 |    } | 
 | } | 
 |  | 
 | /* png_convert_size: a PNGAPI but no longer in png.h, so deleted | 
 |  * at libpng 1.5.5! | 
 |  */ | 
 |  | 
 | /* Added at libpng version 1.2.34 and 1.4.0 (moved from pngset.c) */ | 
 | #ifdef PNG_GAMMA_SUPPORTED /* always set if COLORSPACE */ | 
 | static int | 
 | png_colorspace_check_gamma(png_const_structrp png_ptr, | 
 |     png_colorspacerp colorspace, png_fixed_point gAMA, int from) | 
 |    /* This is called to check a new gamma value against an existing one.  The | 
 |     * routine returns false if the new gamma value should not be written. | 
 |     * | 
 |     * 'from' says where the new gamma value comes from: | 
 |     * | 
 |     *    0: the new gamma value is the libpng estimate for an ICC profile | 
 |     *    1: the new gamma value comes from a gAMA chunk | 
 |     *    2: the new gamma value comes from an sRGB chunk | 
 |     */ | 
 | { | 
 |    png_fixed_point gtest; | 
 |  | 
 |    if ((colorspace->flags & PNG_COLORSPACE_HAVE_GAMMA) != 0 && | 
 |        (png_muldiv(>est, colorspace->gamma, PNG_FP_1, gAMA) == 0  || | 
 |       png_gamma_significant(gtest) != 0)) | 
 |    { | 
 |       /* Either this is an sRGB image, in which case the calculated gamma | 
 |        * approximation should match, or this is an image with a profile and the | 
 |        * value libpng calculates for the gamma of the profile does not match the | 
 |        * value recorded in the file.  The former, sRGB, case is an error, the | 
 |        * latter is just a warning. | 
 |        */ | 
 |       if ((colorspace->flags & PNG_COLORSPACE_FROM_sRGB) != 0 || from == 2) | 
 |       { | 
 |          png_chunk_report(png_ptr, "gamma value does not match sRGB", | 
 |              PNG_CHUNK_ERROR); | 
 |          /* Do not overwrite an sRGB value */ | 
 |          return from == 2; | 
 |       } | 
 |  | 
 |       else /* sRGB tag not involved */ | 
 |       { | 
 |          png_chunk_report(png_ptr, "gamma value does not match libpng estimate", | 
 |              PNG_CHUNK_WARNING); | 
 |          return from == 1; | 
 |       } | 
 |    } | 
 |  | 
 |    return 1; | 
 | } | 
 |  | 
 | void /* PRIVATE */ | 
 | png_colorspace_set_gamma(png_const_structrp png_ptr, | 
 |     png_colorspacerp colorspace, png_fixed_point gAMA) | 
 | { | 
 |    /* Changed in libpng-1.5.4 to limit the values to ensure overflow can't | 
 |     * occur.  Since the fixed point representation is asymmetrical it is | 
 |     * possible for 1/gamma to overflow the limit of 21474 and this means the | 
 |     * gamma value must be at least 5/100000 and hence at most 20000.0.  For | 
 |     * safety the limits here are a little narrower.  The values are 0.00016 to | 
 |     * 6250.0, which are truly ridiculous gamma values (and will produce | 
 |     * displays that are all black or all white.) | 
 |     * | 
 |     * In 1.6.0 this test replaces the ones in pngrutil.c, in the gAMA chunk | 
 |     * handling code, which only required the value to be >0. | 
 |     */ | 
 |    png_const_charp errmsg; | 
 |  | 
 |    if (gAMA < 16 || gAMA > 625000000) | 
 |       errmsg = "gamma value out of range"; | 
 |  | 
 | #  ifdef PNG_READ_gAMA_SUPPORTED | 
 |    /* Allow the application to set the gamma value more than once */ | 
 |    else if ((png_ptr->mode & PNG_IS_READ_STRUCT) != 0 && | 
 |       (colorspace->flags & PNG_COLORSPACE_FROM_gAMA) != 0) | 
 |       errmsg = "duplicate"; | 
 | #  endif | 
 |  | 
 |    /* Do nothing if the colorspace is already invalid */ | 
 |    else if ((colorspace->flags & PNG_COLORSPACE_INVALID) != 0) | 
 |       return; | 
 |  | 
 |    else | 
 |    { | 
 |       if (png_colorspace_check_gamma(png_ptr, colorspace, gAMA, | 
 |           1/*from gAMA*/) != 0) | 
 |       { | 
 |          /* Store this gamma value. */ | 
 |          colorspace->gamma = gAMA; | 
 |          colorspace->flags |= | 
 |             (PNG_COLORSPACE_HAVE_GAMMA | PNG_COLORSPACE_FROM_gAMA); | 
 |       } | 
 |  | 
 |       /* At present if the check_gamma test fails the gamma of the colorspace is | 
 |        * not updated however the colorspace is not invalidated.  This | 
 |        * corresponds to the case where the existing gamma comes from an sRGB | 
 |        * chunk or profile.  An error message has already been output. | 
 |        */ | 
 |       return; | 
 |    } | 
 |  | 
 |    /* Error exit - errmsg has been set. */ | 
 |    colorspace->flags |= PNG_COLORSPACE_INVALID; | 
 |    png_chunk_report(png_ptr, errmsg, PNG_CHUNK_WRITE_ERROR); | 
 | } | 
 |  | 
 | void /* PRIVATE */ | 
 | png_colorspace_sync_info(png_const_structrp png_ptr, png_inforp info_ptr) | 
 | { | 
 |    if ((info_ptr->colorspace.flags & PNG_COLORSPACE_INVALID) != 0) | 
 |    { | 
 |       /* Everything is invalid */ | 
 |       info_ptr->valid &= ~(PNG_INFO_gAMA|PNG_INFO_cHRM|PNG_INFO_sRGB| | 
 |          PNG_INFO_iCCP); | 
 |  | 
 | #     ifdef PNG_COLORSPACE_SUPPORTED | 
 |       /* Clean up the iCCP profile now if it won't be used. */ | 
 |       png_free_data(png_ptr, info_ptr, PNG_FREE_ICCP, -1/*not used*/); | 
 | #     else | 
 |       PNG_UNUSED(png_ptr) | 
 | #     endif | 
 |    } | 
 |  | 
 |    else | 
 |    { | 
 | #     ifdef PNG_COLORSPACE_SUPPORTED | 
 |       /* Leave the INFO_iCCP flag set if the pngset.c code has already set | 
 |        * it; this allows a PNG to contain a profile which matches sRGB and | 
 |        * yet still have that profile retrievable by the application. | 
 |        */ | 
 |       if ((info_ptr->colorspace.flags & PNG_COLORSPACE_MATCHES_sRGB) != 0) | 
 |          info_ptr->valid |= PNG_INFO_sRGB; | 
 |  | 
 |       else | 
 |          info_ptr->valid &= ~PNG_INFO_sRGB; | 
 |  | 
 |       if ((info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS) != 0) | 
 |          info_ptr->valid |= PNG_INFO_cHRM; | 
 |  | 
 |       else | 
 |          info_ptr->valid &= ~PNG_INFO_cHRM; | 
 | #     endif | 
 |  | 
 |       if ((info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_GAMMA) != 0) | 
 |          info_ptr->valid |= PNG_INFO_gAMA; | 
 |  | 
 |       else | 
 |          info_ptr->valid &= ~PNG_INFO_gAMA; | 
 |    } | 
 | } | 
 |  | 
 | #ifdef PNG_READ_SUPPORTED | 
 | void /* PRIVATE */ | 
 | png_colorspace_sync(png_const_structrp png_ptr, png_inforp info_ptr) | 
 | { | 
 |    if (info_ptr == NULL) /* reduce code size; check here not in the caller */ | 
 |       return; | 
 |  | 
 |    info_ptr->colorspace = png_ptr->colorspace; | 
 |    png_colorspace_sync_info(png_ptr, info_ptr); | 
 | } | 
 | #endif | 
 | #endif /* GAMMA */ | 
 |  | 
 | #ifdef PNG_COLORSPACE_SUPPORTED | 
 | /* Added at libpng-1.5.5 to support read and write of true CIEXYZ values for | 
 |  * cHRM, as opposed to using chromaticities.  These internal APIs return | 
 |  * non-zero on a parameter error.  The X, Y and Z values are required to be | 
 |  * positive and less than 1.0. | 
 |  */ | 
 | static int | 
 | png_xy_from_XYZ(png_xy *xy, const png_XYZ *XYZ) | 
 | { | 
 |    png_int_32 d, dwhite, whiteX, whiteY; | 
 |  | 
 |    d = XYZ->red_X + XYZ->red_Y + XYZ->red_Z; | 
 |    if (png_muldiv(&xy->redx, XYZ->red_X, PNG_FP_1, d) == 0) | 
 |       return 1; | 
 |    if (png_muldiv(&xy->redy, XYZ->red_Y, PNG_FP_1, d) == 0) | 
 |       return 1; | 
 |    dwhite = d; | 
 |    whiteX = XYZ->red_X; | 
 |    whiteY = XYZ->red_Y; | 
 |  | 
 |    d = XYZ->green_X + XYZ->green_Y + XYZ->green_Z; | 
 |    if (png_muldiv(&xy->greenx, XYZ->green_X, PNG_FP_1, d) == 0) | 
 |       return 1; | 
 |    if (png_muldiv(&xy->greeny, XYZ->green_Y, PNG_FP_1, d) == 0) | 
 |       return 1; | 
 |    dwhite += d; | 
 |    whiteX += XYZ->green_X; | 
 |    whiteY += XYZ->green_Y; | 
 |  | 
 |    d = XYZ->blue_X + XYZ->blue_Y + XYZ->blue_Z; | 
 |    if (png_muldiv(&xy->bluex, XYZ->blue_X, PNG_FP_1, d) == 0) | 
 |       return 1; | 
 |    if (png_muldiv(&xy->bluey, XYZ->blue_Y, PNG_FP_1, d) == 0) | 
 |       return 1; | 
 |    dwhite += d; | 
 |    whiteX += XYZ->blue_X; | 
 |    whiteY += XYZ->blue_Y; | 
 |  | 
 |    /* The reference white is simply the sum of the end-point (X,Y,Z) vectors, | 
 |     * thus: | 
 |     */ | 
 |    if (png_muldiv(&xy->whitex, whiteX, PNG_FP_1, dwhite) == 0) | 
 |       return 1; | 
 |    if (png_muldiv(&xy->whitey, whiteY, PNG_FP_1, dwhite) == 0) | 
 |       return 1; | 
 |  | 
 |    return 0; | 
 | } | 
 |  | 
 | static int | 
 | png_XYZ_from_xy(png_XYZ *XYZ, const png_xy *xy) | 
 | { | 
 |    png_fixed_point red_inverse, green_inverse, blue_scale; | 
 |    png_fixed_point left, right, denominator; | 
 |  | 
 |    /* Check xy and, implicitly, z.  Note that wide gamut color spaces typically | 
 |     * have end points with 0 tristimulus values (these are impossible end | 
 |     * points, but they are used to cover the possible colors).  We check | 
 |     * xy->whitey against 5, not 0, to avoid a possible integer overflow. | 
 |     */ | 
 |    if (xy->redx   < 0 || xy->redx > PNG_FP_1) return 1; | 
 |    if (xy->redy   < 0 || xy->redy > PNG_FP_1-xy->redx) return 1; | 
 |    if (xy->greenx < 0 || xy->greenx > PNG_FP_1) return 1; | 
 |    if (xy->greeny < 0 || xy->greeny > PNG_FP_1-xy->greenx) return 1; | 
 |    if (xy->bluex  < 0 || xy->bluex > PNG_FP_1) return 1; | 
 |    if (xy->bluey  < 0 || xy->bluey > PNG_FP_1-xy->bluex) return 1; | 
 |    if (xy->whitex < 0 || xy->whitex > PNG_FP_1) return 1; | 
 |    if (xy->whitey < 5 || xy->whitey > PNG_FP_1-xy->whitex) return 1; | 
 |  | 
 |    /* The reverse calculation is more difficult because the original tristimulus | 
 |     * value had 9 independent values (red,green,blue)x(X,Y,Z) however only 8 | 
 |     * derived values were recorded in the cHRM chunk; | 
 |     * (red,green,blue,white)x(x,y).  This loses one degree of freedom and | 
 |     * therefore an arbitrary ninth value has to be introduced to undo the | 
 |     * original transformations. | 
 |     * | 
 |     * Think of the original end-points as points in (X,Y,Z) space.  The | 
 |     * chromaticity values (c) have the property: | 
 |     * | 
 |     *           C | 
 |     *   c = --------- | 
 |     *       X + Y + Z | 
 |     * | 
 |     * For each c (x,y,z) from the corresponding original C (X,Y,Z).  Thus the | 
 |     * three chromaticity values (x,y,z) for each end-point obey the | 
 |     * relationship: | 
 |     * | 
 |     *   x + y + z = 1 | 
 |     * | 
 |     * This describes the plane in (X,Y,Z) space that intersects each axis at the | 
 |     * value 1.0; call this the chromaticity plane.  Thus the chromaticity | 
 |     * calculation has scaled each end-point so that it is on the x+y+z=1 plane | 
 |     * and chromaticity is the intersection of the vector from the origin to the | 
 |     * (X,Y,Z) value with the chromaticity plane. | 
 |     * | 
 |     * To fully invert the chromaticity calculation we would need the three | 
 |     * end-point scale factors, (red-scale, green-scale, blue-scale), but these | 
 |     * were not recorded.  Instead we calculated the reference white (X,Y,Z) and | 
 |     * recorded the chromaticity of this.  The reference white (X,Y,Z) would have | 
 |     * given all three of the scale factors since: | 
 |     * | 
 |     *    color-C = color-c * color-scale | 
 |     *    white-C = red-C + green-C + blue-C | 
 |     *            = red-c*red-scale + green-c*green-scale + blue-c*blue-scale | 
 |     * | 
 |     * But cHRM records only white-x and white-y, so we have lost the white scale | 
 |     * factor: | 
 |     * | 
 |     *    white-C = white-c*white-scale | 
 |     * | 
 |     * To handle this the inverse transformation makes an arbitrary assumption | 
 |     * about white-scale: | 
 |     * | 
 |     *    Assume: white-Y = 1.0 | 
 |     *    Hence:  white-scale = 1/white-y | 
 |     *    Or:     red-Y + green-Y + blue-Y = 1.0 | 
 |     * | 
 |     * Notice the last statement of the assumption gives an equation in three of | 
 |     * the nine values we want to calculate.  8 more equations come from the | 
 |     * above routine as summarised at the top above (the chromaticity | 
 |     * calculation): | 
 |     * | 
 |     *    Given: color-x = color-X / (color-X + color-Y + color-Z) | 
 |     *    Hence: (color-x - 1)*color-X + color.x*color-Y + color.x*color-Z = 0 | 
 |     * | 
 |     * This is 9 simultaneous equations in the 9 variables "color-C" and can be | 
 |     * solved by Cramer's rule.  Cramer's rule requires calculating 10 9x9 matrix | 
 |     * determinants, however this is not as bad as it seems because only 28 of | 
 |     * the total of 90 terms in the various matrices are non-zero.  Nevertheless | 
 |     * Cramer's rule is notoriously numerically unstable because the determinant | 
 |     * calculation involves the difference of large, but similar, numbers.  It is | 
 |     * difficult to be sure that the calculation is stable for real world values | 
 |     * and it is certain that it becomes unstable where the end points are close | 
 |     * together. | 
 |     * | 
 |     * So this code uses the perhaps slightly less optimal but more | 
 |     * understandable and totally obvious approach of calculating color-scale. | 
 |     * | 
 |     * This algorithm depends on the precision in white-scale and that is | 
 |     * (1/white-y), so we can immediately see that as white-y approaches 0 the | 
 |     * accuracy inherent in the cHRM chunk drops off substantially. | 
 |     * | 
 |     * libpng arithmetic: a simple inversion of the above equations | 
 |     * ------------------------------------------------------------ | 
 |     * | 
 |     *    white_scale = 1/white-y | 
 |     *    white-X = white-x * white-scale | 
 |     *    white-Y = 1.0 | 
 |     *    white-Z = (1 - white-x - white-y) * white_scale | 
 |     * | 
 |     *    white-C = red-C + green-C + blue-C | 
 |     *            = red-c*red-scale + green-c*green-scale + blue-c*blue-scale | 
 |     * | 
 |     * This gives us three equations in (red-scale,green-scale,blue-scale) where | 
 |     * all the coefficients are now known: | 
 |     * | 
 |     *    red-x*red-scale + green-x*green-scale + blue-x*blue-scale | 
 |     *       = white-x/white-y | 
 |     *    red-y*red-scale + green-y*green-scale + blue-y*blue-scale = 1 | 
 |     *    red-z*red-scale + green-z*green-scale + blue-z*blue-scale | 
 |     *       = (1 - white-x - white-y)/white-y | 
 |     * | 
 |     * In the last equation color-z is (1 - color-x - color-y) so we can add all | 
 |     * three equations together to get an alternative third: | 
 |     * | 
 |     *    red-scale + green-scale + blue-scale = 1/white-y = white-scale | 
 |     * | 
 |     * So now we have a Cramer's rule solution where the determinants are just | 
 |     * 3x3 - far more tractible.  Unfortunately 3x3 determinants still involve | 
 |     * multiplication of three coefficients so we can't guarantee to avoid | 
 |     * overflow in the libpng fixed point representation.  Using Cramer's rule in | 
 |     * floating point is probably a good choice here, but it's not an option for | 
 |     * fixed point.  Instead proceed to simplify the first two equations by | 
 |     * eliminating what is likely to be the largest value, blue-scale: | 
 |     * | 
 |     *    blue-scale = white-scale - red-scale - green-scale | 
 |     * | 
 |     * Hence: | 
 |     * | 
 |     *    (red-x - blue-x)*red-scale + (green-x - blue-x)*green-scale = | 
 |     *                (white-x - blue-x)*white-scale | 
 |     * | 
 |     *    (red-y - blue-y)*red-scale + (green-y - blue-y)*green-scale = | 
 |     *                1 - blue-y*white-scale | 
 |     * | 
 |     * And now we can trivially solve for (red-scale,green-scale): | 
 |     * | 
 |     *    green-scale = | 
 |     *                (white-x - blue-x)*white-scale - (red-x - blue-x)*red-scale | 
 |     *                ----------------------------------------------------------- | 
 |     *                                  green-x - blue-x | 
 |     * | 
 |     *    red-scale = | 
 |     *                1 - blue-y*white-scale - (green-y - blue-y) * green-scale | 
 |     *                --------------------------------------------------------- | 
 |     *                                  red-y - blue-y | 
 |     * | 
 |     * Hence: | 
 |     * | 
 |     *    red-scale = | 
 |     *          ( (green-x - blue-x) * (white-y - blue-y) - | 
 |     *            (green-y - blue-y) * (white-x - blue-x) ) / white-y | 
 |     * ------------------------------------------------------------------------- | 
 |     *  (green-x - blue-x)*(red-y - blue-y)-(green-y - blue-y)*(red-x - blue-x) | 
 |     * | 
 |     *    green-scale = | 
 |     *          ( (red-y - blue-y) * (white-x - blue-x) - | 
 |     *            (red-x - blue-x) * (white-y - blue-y) ) / white-y | 
 |     * ------------------------------------------------------------------------- | 
 |     *  (green-x - blue-x)*(red-y - blue-y)-(green-y - blue-y)*(red-x - blue-x) | 
 |     * | 
 |     * Accuracy: | 
 |     * The input values have 5 decimal digits of accuracy.  The values are all in | 
 |     * the range 0 < value < 1, so simple products are in the same range but may | 
 |     * need up to 10 decimal digits to preserve the original precision and avoid | 
 |     * underflow.  Because we are using a 32-bit signed representation we cannot | 
 |     * match this; the best is a little over 9 decimal digits, less than 10. | 
 |     * | 
 |     * The approach used here is to preserve the maximum precision within the | 
 |     * signed representation.  Because the red-scale calculation above uses the | 
 |     * difference between two products of values that must be in the range -1..+1 | 
 |     * it is sufficient to divide the product by 7; ceil(100,000/32767*2).  The | 
 |     * factor is irrelevant in the calculation because it is applied to both | 
 |     * numerator and denominator. | 
 |     * | 
 |     * Note that the values of the differences of the products of the | 
 |     * chromaticities in the above equations tend to be small, for example for | 
 |     * the sRGB chromaticities they are: | 
 |     * | 
 |     * red numerator:    -0.04751 | 
 |     * green numerator:  -0.08788 | 
 |     * denominator:      -0.2241 (without white-y multiplication) | 
 |     * | 
 |     *  The resultant Y coefficients from the chromaticities of some widely used | 
 |     *  color space definitions are (to 15 decimal places): | 
 |     * | 
 |     *  sRGB | 
 |     *    0.212639005871510 0.715168678767756 0.072192315360734 | 
 |     *  Kodak ProPhoto | 
 |     *    0.288071128229293 0.711843217810102 0.000085653960605 | 
 |     *  Adobe RGB | 
 |     *    0.297344975250536 0.627363566255466 0.075291458493998 | 
 |     *  Adobe Wide Gamut RGB | 
 |     *    0.258728243040113 0.724682314948566 0.016589442011321 | 
 |     */ | 
 |    /* By the argument, above overflow should be impossible here. The return | 
 |     * value of 2 indicates an internal error to the caller. | 
 |     */ | 
 |    if (png_muldiv(&left, xy->greenx-xy->bluex, xy->redy - xy->bluey, 7) == 0) | 
 |       return 2; | 
 |    if (png_muldiv(&right, xy->greeny-xy->bluey, xy->redx - xy->bluex, 7) == 0) | 
 |       return 2; | 
 |    denominator = left - right; | 
 |  | 
 |    /* Now find the red numerator. */ | 
 |    if (png_muldiv(&left, xy->greenx-xy->bluex, xy->whitey-xy->bluey, 7) == 0) | 
 |       return 2; | 
 |    if (png_muldiv(&right, xy->greeny-xy->bluey, xy->whitex-xy->bluex, 7) == 0) | 
 |       return 2; | 
 |  | 
 |    /* Overflow is possible here and it indicates an extreme set of PNG cHRM | 
 |     * chunk values.  This calculation actually returns the reciprocal of the | 
 |     * scale value because this allows us to delay the multiplication of white-y | 
 |     * into the denominator, which tends to produce a small number. | 
 |     */ | 
 |    if (png_muldiv(&red_inverse, xy->whitey, denominator, left-right) == 0 || | 
 |        red_inverse <= xy->whitey /* r+g+b scales = white scale */) | 
 |       return 1; | 
 |  | 
 |    /* Similarly for green_inverse: */ | 
 |    if (png_muldiv(&left, xy->redy-xy->bluey, xy->whitex-xy->bluex, 7) == 0) | 
 |       return 2; | 
 |    if (png_muldiv(&right, xy->redx-xy->bluex, xy->whitey-xy->bluey, 7) == 0) | 
 |       return 2; | 
 |    if (png_muldiv(&green_inverse, xy->whitey, denominator, left-right) == 0 || | 
 |        green_inverse <= xy->whitey) | 
 |       return 1; | 
 |  | 
 |    /* And the blue scale, the checks above guarantee this can't overflow but it | 
 |     * can still produce 0 for extreme cHRM values. | 
 |     */ | 
 |    blue_scale = png_reciprocal(xy->whitey) - png_reciprocal(red_inverse) - | 
 |        png_reciprocal(green_inverse); | 
 |    if (blue_scale <= 0) | 
 |       return 1; | 
 |  | 
 |  | 
 |    /* And fill in the png_XYZ: */ | 
 |    if (png_muldiv(&XYZ->red_X, xy->redx, PNG_FP_1, red_inverse) == 0) | 
 |       return 1; | 
 |    if (png_muldiv(&XYZ->red_Y, xy->redy, PNG_FP_1, red_inverse) == 0) | 
 |       return 1; | 
 |    if (png_muldiv(&XYZ->red_Z, PNG_FP_1 - xy->redx - xy->redy, PNG_FP_1, | 
 |        red_inverse) == 0) | 
 |       return 1; | 
 |  | 
 |    if (png_muldiv(&XYZ->green_X, xy->greenx, PNG_FP_1, green_inverse) == 0) | 
 |       return 1; | 
 |    if (png_muldiv(&XYZ->green_Y, xy->greeny, PNG_FP_1, green_inverse) == 0) | 
 |       return 1; | 
 |    if (png_muldiv(&XYZ->green_Z, PNG_FP_1 - xy->greenx - xy->greeny, PNG_FP_1, | 
 |        green_inverse) == 0) | 
 |       return 1; | 
 |  | 
 |    if (png_muldiv(&XYZ->blue_X, xy->bluex, blue_scale, PNG_FP_1) == 0) | 
 |       return 1; | 
 |    if (png_muldiv(&XYZ->blue_Y, xy->bluey, blue_scale, PNG_FP_1) == 0) | 
 |       return 1; | 
 |    if (png_muldiv(&XYZ->blue_Z, PNG_FP_1 - xy->bluex - xy->bluey, blue_scale, | 
 |        PNG_FP_1) == 0) | 
 |       return 1; | 
 |  | 
 |    return 0; /*success*/ | 
 | } | 
 |  | 
 | static int | 
 | png_XYZ_normalize(png_XYZ *XYZ) | 
 | { | 
 |    png_int_32 Y; | 
 |  | 
 |    if (XYZ->red_Y < 0 || XYZ->green_Y < 0 || XYZ->blue_Y < 0 || | 
 |       XYZ->red_X < 0 || XYZ->green_X < 0 || XYZ->blue_X < 0 || | 
 |       XYZ->red_Z < 0 || XYZ->green_Z < 0 || XYZ->blue_Z < 0) | 
 |       return 1; | 
 |  | 
 |    /* Normalize by scaling so the sum of the end-point Y values is PNG_FP_1. | 
 |     * IMPLEMENTATION NOTE: ANSI requires signed overflow not to occur, therefore | 
 |     * relying on addition of two positive values producing a negative one is not | 
 |     * safe. | 
 |     */ | 
 |    Y = XYZ->red_Y; | 
 |    if (0x7fffffff - Y < XYZ->green_X) | 
 |       return 1; | 
 |    Y += XYZ->green_Y; | 
 |    if (0x7fffffff - Y < XYZ->blue_X) | 
 |       return 1; | 
 |    Y += XYZ->blue_Y; | 
 |  | 
 |    if (Y != PNG_FP_1) | 
 |    { | 
 |       if (png_muldiv(&XYZ->red_X, XYZ->red_X, PNG_FP_1, Y) == 0) | 
 |          return 1; | 
 |       if (png_muldiv(&XYZ->red_Y, XYZ->red_Y, PNG_FP_1, Y) == 0) | 
 |          return 1; | 
 |       if (png_muldiv(&XYZ->red_Z, XYZ->red_Z, PNG_FP_1, Y) == 0) | 
 |          return 1; | 
 |  | 
 |       if (png_muldiv(&XYZ->green_X, XYZ->green_X, PNG_FP_1, Y) == 0) | 
 |          return 1; | 
 |       if (png_muldiv(&XYZ->green_Y, XYZ->green_Y, PNG_FP_1, Y) == 0) | 
 |          return 1; | 
 |       if (png_muldiv(&XYZ->green_Z, XYZ->green_Z, PNG_FP_1, Y) == 0) | 
 |          return 1; | 
 |  | 
 |       if (png_muldiv(&XYZ->blue_X, XYZ->blue_X, PNG_FP_1, Y) == 0) | 
 |          return 1; | 
 |       if (png_muldiv(&XYZ->blue_Y, XYZ->blue_Y, PNG_FP_1, Y) == 0) | 
 |          return 1; | 
 |       if (png_muldiv(&XYZ->blue_Z, XYZ->blue_Z, PNG_FP_1, Y) == 0) | 
 |          return 1; | 
 |    } | 
 |  | 
 |    return 0; | 
 | } | 
 |  | 
 | static int | 
 | png_colorspace_endpoints_match(const png_xy *xy1, const png_xy *xy2, int delta) | 
 | { | 
 |    /* Allow an error of +/-0.01 (absolute value) on each chromaticity */ | 
 |    if (PNG_OUT_OF_RANGE(xy1->whitex, xy2->whitex,delta) || | 
 |        PNG_OUT_OF_RANGE(xy1->whitey, xy2->whitey,delta) || | 
 |        PNG_OUT_OF_RANGE(xy1->redx,   xy2->redx,  delta) || | 
 |        PNG_OUT_OF_RANGE(xy1->redy,   xy2->redy,  delta) || | 
 |        PNG_OUT_OF_RANGE(xy1->greenx, xy2->greenx,delta) || | 
 |        PNG_OUT_OF_RANGE(xy1->greeny, xy2->greeny,delta) || | 
 |        PNG_OUT_OF_RANGE(xy1->bluex,  xy2->bluex, delta) || | 
 |        PNG_OUT_OF_RANGE(xy1->bluey,  xy2->bluey, delta)) | 
 |       return 0; | 
 |    return 1; | 
 | } | 
 |  | 
 | /* Added in libpng-1.6.0, a different check for the validity of a set of cHRM | 
 |  * chunk chromaticities.  Earlier checks used to simply look for the overflow | 
 |  * condition (where the determinant of the matrix to solve for XYZ ends up zero | 
 |  * because the chromaticity values are not all distinct.)  Despite this it is | 
 |  * theoretically possible to produce chromaticities that are apparently valid | 
 |  * but that rapidly degrade to invalid, potentially crashing, sets because of | 
 |  * arithmetic inaccuracies when calculations are performed on them.  The new | 
 |  * check is to round-trip xy -> XYZ -> xy and then check that the result is | 
 |  * within a small percentage of the original. | 
 |  */ | 
 | static int | 
 | png_colorspace_check_xy(png_XYZ *XYZ, const png_xy *xy) | 
 | { | 
 |    int result; | 
 |    png_xy xy_test; | 
 |  | 
 |    /* As a side-effect this routine also returns the XYZ endpoints. */ | 
 |    result = png_XYZ_from_xy(XYZ, xy); | 
 |    if (result != 0) | 
 |       return result; | 
 |  | 
 |    result = png_xy_from_XYZ(&xy_test, XYZ); | 
 |    if (result != 0) | 
 |       return result; | 
 |  | 
 |    if (png_colorspace_endpoints_match(xy, &xy_test, | 
 |        5/*actually, the math is pretty accurate*/) != 0) | 
 |       return 0; | 
 |  | 
 |    /* Too much slip */ | 
 |    return 1; | 
 | } | 
 |  | 
 | /* This is the check going the other way.  The XYZ is modified to normalize it | 
 |  * (another side-effect) and the xy chromaticities are returned. | 
 |  */ | 
 | static int | 
 | png_colorspace_check_XYZ(png_xy *xy, png_XYZ *XYZ) | 
 | { | 
 |    int result; | 
 |    png_XYZ XYZtemp; | 
 |  | 
 |    result = png_XYZ_normalize(XYZ); | 
 |    if (result != 0) | 
 |       return result; | 
 |  | 
 |    result = png_xy_from_XYZ(xy, XYZ); | 
 |    if (result != 0) | 
 |       return result; | 
 |  | 
 |    XYZtemp = *XYZ; | 
 |    return png_colorspace_check_xy(&XYZtemp, xy); | 
 | } | 
 |  | 
 | /* Used to check for an endpoint match against sRGB */ | 
 | static const png_xy sRGB_xy = /* From ITU-R BT.709-3 */ | 
 | { | 
 |    /* color      x       y */ | 
 |    /* red   */ 64000, 33000, | 
 |    /* green */ 30000, 60000, | 
 |    /* blue  */ 15000,  6000, | 
 |    /* white */ 31270, 32900 | 
 | }; | 
 |  | 
 | static int | 
 | png_colorspace_set_xy_and_XYZ(png_const_structrp png_ptr, | 
 |     png_colorspacerp colorspace, const png_xy *xy, const png_XYZ *XYZ, | 
 |     int preferred) | 
 | { | 
 |    if ((colorspace->flags & PNG_COLORSPACE_INVALID) != 0) | 
 |       return 0; | 
 |  | 
 |    /* The consistency check is performed on the chromaticities; this factors out | 
 |     * variations because of the normalization (or not) of the end point Y | 
 |     * values. | 
 |     */ | 
 |    if (preferred < 2 && | 
 |        (colorspace->flags & PNG_COLORSPACE_HAVE_ENDPOINTS) != 0) | 
 |    { | 
 |       /* The end points must be reasonably close to any we already have.  The | 
 |        * following allows an error of up to +/-.001 | 
 |        */ | 
 |       if (png_colorspace_endpoints_match(xy, &colorspace->end_points_xy, | 
 |           100) == 0) | 
 |       { | 
 |          colorspace->flags |= PNG_COLORSPACE_INVALID; | 
 |          png_benign_error(png_ptr, "inconsistent chromaticities"); | 
 |          return 0; /* failed */ | 
 |       } | 
 |  | 
 |       /* Only overwrite with preferred values */ | 
 |       if (preferred == 0) | 
 |          return 1; /* ok, but no change */ | 
 |    } | 
 |  | 
 |    colorspace->end_points_xy = *xy; | 
 |    colorspace->end_points_XYZ = *XYZ; | 
 |    colorspace->flags |= PNG_COLORSPACE_HAVE_ENDPOINTS; | 
 |  | 
 |    /* The end points are normally quoted to two decimal digits, so allow +/-0.01 | 
 |     * on this test. | 
 |     */ | 
 |    if (png_colorspace_endpoints_match(xy, &sRGB_xy, 1000) != 0) | 
 |       colorspace->flags |= PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB; | 
 |  | 
 |    else | 
 |       colorspace->flags &= PNG_COLORSPACE_CANCEL( | 
 |          PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB); | 
 |  | 
 |    return 2; /* ok and changed */ | 
 | } | 
 |  | 
 | int /* PRIVATE */ | 
 | png_colorspace_set_chromaticities(png_const_structrp png_ptr, | 
 |     png_colorspacerp colorspace, const png_xy *xy, int preferred) | 
 | { | 
 |    /* We must check the end points to ensure they are reasonable - in the past | 
 |     * color management systems have crashed as a result of getting bogus | 
 |     * colorant values, while this isn't the fault of libpng it is the | 
 |     * responsibility of libpng because PNG carries the bomb and libpng is in a | 
 |     * position to protect against it. | 
 |     */ | 
 |    png_XYZ XYZ; | 
 |  | 
 |    switch (png_colorspace_check_xy(&XYZ, xy)) | 
 |    { | 
 |       case 0: /* success */ | 
 |          return png_colorspace_set_xy_and_XYZ(png_ptr, colorspace, xy, &XYZ, | 
 |              preferred); | 
 |  | 
 |       case 1: | 
 |          /* We can't invert the chromaticities so we can't produce value XYZ | 
 |           * values.  Likely as not a color management system will fail too. | 
 |           */ | 
 |          colorspace->flags |= PNG_COLORSPACE_INVALID; | 
 |          png_benign_error(png_ptr, "invalid chromaticities"); | 
 |          break; | 
 |  | 
 |       default: | 
 |          /* libpng is broken; this should be a warning but if it happens we | 
 |           * want error reports so for the moment it is an error. | 
 |           */ | 
 |          colorspace->flags |= PNG_COLORSPACE_INVALID; | 
 |          png_error(png_ptr, "internal error checking chromaticities"); | 
 |    } | 
 |  | 
 |    return 0; /* failed */ | 
 | } | 
 |  | 
 | int /* PRIVATE */ | 
 | png_colorspace_set_endpoints(png_const_structrp png_ptr, | 
 |     png_colorspacerp colorspace, const png_XYZ *XYZ_in, int preferred) | 
 | { | 
 |    png_XYZ XYZ = *XYZ_in; | 
 |    png_xy xy; | 
 |  | 
 |    switch (png_colorspace_check_XYZ(&xy, &XYZ)) | 
 |    { | 
 |       case 0: | 
 |          return png_colorspace_set_xy_and_XYZ(png_ptr, colorspace, &xy, &XYZ, | 
 |              preferred); | 
 |  | 
 |       case 1: | 
 |          /* End points are invalid. */ | 
 |          colorspace->flags |= PNG_COLORSPACE_INVALID; | 
 |          png_benign_error(png_ptr, "invalid end points"); | 
 |          break; | 
 |  | 
 |       default: | 
 |          colorspace->flags |= PNG_COLORSPACE_INVALID; | 
 |          png_error(png_ptr, "internal error checking chromaticities"); | 
 |    } | 
 |  | 
 |    return 0; /* failed */ | 
 | } | 
 |  | 
 | #if defined(PNG_sRGB_SUPPORTED) || defined(PNG_iCCP_SUPPORTED) | 
 | /* Error message generation */ | 
 | static char | 
 | png_icc_tag_char(png_uint_32 byte) | 
 | { | 
 |    byte &= 0xff; | 
 |    if (byte >= 32 && byte <= 126) | 
 |       return (char)byte; | 
 |    else | 
 |       return '?'; | 
 | } | 
 |  | 
 | static void | 
 | png_icc_tag_name(char *name, png_uint_32 tag) | 
 | { | 
 |    name[0] = '\''; | 
 |    name[1] = png_icc_tag_char(tag >> 24); | 
 |    name[2] = png_icc_tag_char(tag >> 16); | 
 |    name[3] = png_icc_tag_char(tag >>  8); | 
 |    name[4] = png_icc_tag_char(tag      ); | 
 |    name[5] = '\''; | 
 | } | 
 |  | 
 | static int | 
 | is_ICC_signature_char(png_alloc_size_t it) | 
 | { | 
 |    return it == 32 || (it >= 48 && it <= 57) || (it >= 65 && it <= 90) || | 
 |       (it >= 97 && it <= 122); | 
 | } | 
 |  | 
 | static int | 
 | is_ICC_signature(png_alloc_size_t it) | 
 | { | 
 |    return is_ICC_signature_char(it >> 24) /* checks all the top bits */ && | 
 |       is_ICC_signature_char((it >> 16) & 0xff) && | 
 |       is_ICC_signature_char((it >> 8) & 0xff) && | 
 |       is_ICC_signature_char(it & 0xff); | 
 | } | 
 |  | 
 | static int | 
 | png_icc_profile_error(png_const_structrp png_ptr, png_colorspacerp colorspace, | 
 |     png_const_charp name, png_alloc_size_t value, png_const_charp reason) | 
 | { | 
 |    size_t pos; | 
 |    char message[196]; /* see below for calculation */ | 
 |  | 
 |    if (colorspace != NULL) | 
 |       colorspace->flags |= PNG_COLORSPACE_INVALID; | 
 |  | 
 |    pos = png_safecat(message, (sizeof message), 0, "profile '"); /* 9 chars */ | 
 |    pos = png_safecat(message, pos+79, pos, name); /* Truncate to 79 chars */ | 
 |    pos = png_safecat(message, (sizeof message), pos, "': "); /* +2 = 90 */ | 
 |    if (is_ICC_signature(value) != 0) | 
 |    { | 
 |       /* So 'value' is at most 4 bytes and the following cast is safe */ | 
 |       png_icc_tag_name(message+pos, (png_uint_32)value); | 
 |       pos += 6; /* total +8; less than the else clause */ | 
 |       message[pos++] = ':'; | 
 |       message[pos++] = ' '; | 
 |    } | 
 | #  ifdef PNG_WARNINGS_SUPPORTED | 
 |    else | 
 |       { | 
 |          char number[PNG_NUMBER_BUFFER_SIZE]; /* +24 = 114*/ | 
 |  | 
 |          pos = png_safecat(message, (sizeof message), pos, | 
 |              png_format_number(number, number+(sizeof number), | 
 |              PNG_NUMBER_FORMAT_x, value)); | 
 |          pos = png_safecat(message, (sizeof message), pos, "h: "); /*+2 = 116*/ | 
 |       } | 
 | #  endif | 
 |    /* The 'reason' is an arbitrary message, allow +79 maximum 195 */ | 
 |    pos = png_safecat(message, (sizeof message), pos, reason); | 
 |    PNG_UNUSED(pos) | 
 |  | 
 |    /* This is recoverable, but make it unconditionally an app_error on write to | 
 |     * avoid writing invalid ICC profiles into PNG files (i.e., we handle them | 
 |     * on read, with a warning, but on write unless the app turns off | 
 |     * application errors the PNG won't be written.) | 
 |     */ | 
 |    png_chunk_report(png_ptr, message, | 
 |        (colorspace != NULL) ? PNG_CHUNK_ERROR : PNG_CHUNK_WRITE_ERROR); | 
 |  | 
 |    return 0; | 
 | } | 
 | #endif /* sRGB || iCCP */ | 
 |  | 
 | #ifdef PNG_sRGB_SUPPORTED | 
 | int /* PRIVATE */ | 
 | png_colorspace_set_sRGB(png_const_structrp png_ptr, png_colorspacerp colorspace, | 
 |     int intent) | 
 | { | 
 |    /* sRGB sets known gamma, end points and (from the chunk) intent. */ | 
 |    /* IMPORTANT: these are not necessarily the values found in an ICC profile | 
 |     * because ICC profiles store values adapted to a D50 environment; it is | 
 |     * expected that the ICC profile mediaWhitePointTag will be D50; see the | 
 |     * checks and code elsewhere to understand this better. | 
 |     * | 
 |     * These XYZ values, which are accurate to 5dp, produce rgb to gray | 
 |     * coefficients of (6968,23435,2366), which are reduced (because they add up | 
 |     * to 32769 not 32768) to (6968,23434,2366).  These are the values that | 
 |     * libpng has traditionally used (and are the best values given the 15bit | 
 |     * algorithm used by the rgb to gray code.) | 
 |     */ | 
 |    static const png_XYZ sRGB_XYZ = /* D65 XYZ (*not* the D50 adapted values!) */ | 
 |    { | 
 |       /* color      X      Y      Z */ | 
 |       /* red   */ 41239, 21264,  1933, | 
 |       /* green */ 35758, 71517, 11919, | 
 |       /* blue  */ 18048,  7219, 95053 | 
 |    }; | 
 |  | 
 |    /* Do nothing if the colorspace is already invalidated. */ | 
 |    if ((colorspace->flags & PNG_COLORSPACE_INVALID) != 0) | 
 |       return 0; | 
 |  | 
 |    /* Check the intent, then check for existing settings.  It is valid for the | 
 |     * PNG file to have cHRM or gAMA chunks along with sRGB, but the values must | 
 |     * be consistent with the correct values.  If, however, this function is | 
 |     * called below because an iCCP chunk matches sRGB then it is quite | 
 |     * conceivable that an older app recorded incorrect gAMA and cHRM because of | 
 |     * an incorrect calculation based on the values in the profile - this does | 
 |     * *not* invalidate the profile (though it still produces an error, which can | 
 |     * be ignored.) | 
 |     */ | 
 |    if (intent < 0 || intent >= PNG_sRGB_INTENT_LAST) | 
 |       return png_icc_profile_error(png_ptr, colorspace, "sRGB", | 
 |           (png_alloc_size_t)intent, "invalid sRGB rendering intent"); | 
 |  | 
 |    if ((colorspace->flags & PNG_COLORSPACE_HAVE_INTENT) != 0 && | 
 |        colorspace->rendering_intent != intent) | 
 |       return png_icc_profile_error(png_ptr, colorspace, "sRGB", | 
 |          (png_alloc_size_t)intent, "inconsistent rendering intents"); | 
 |  | 
 |    if ((colorspace->flags & PNG_COLORSPACE_FROM_sRGB) != 0) | 
 |    { | 
 |       png_benign_error(png_ptr, "duplicate sRGB information ignored"); | 
 |       return 0; | 
 |    } | 
 |  | 
 |    /* If the standard sRGB cHRM chunk does not match the one from the PNG file | 
 |     * warn but overwrite the value with the correct one. | 
 |     */ | 
 |    if ((colorspace->flags & PNG_COLORSPACE_HAVE_ENDPOINTS) != 0 && | 
 |        !png_colorspace_endpoints_match(&sRGB_xy, &colorspace->end_points_xy, | 
 |        100)) | 
 |       png_chunk_report(png_ptr, "cHRM chunk does not match sRGB", | 
 |          PNG_CHUNK_ERROR); | 
 |  | 
 |    /* This check is just done for the error reporting - the routine always | 
 |     * returns true when the 'from' argument corresponds to sRGB (2). | 
 |     */ | 
 |    (void)png_colorspace_check_gamma(png_ptr, colorspace, PNG_GAMMA_sRGB_INVERSE, | 
 |        2/*from sRGB*/); | 
 |  | 
 |    /* intent: bugs in GCC force 'int' to be used as the parameter type. */ | 
 |    colorspace->rendering_intent = (png_uint_16)intent; | 
 |    colorspace->flags |= PNG_COLORSPACE_HAVE_INTENT; | 
 |  | 
 |    /* endpoints */ | 
 |    colorspace->end_points_xy = sRGB_xy; | 
 |    colorspace->end_points_XYZ = sRGB_XYZ; | 
 |    colorspace->flags |= | 
 |       (PNG_COLORSPACE_HAVE_ENDPOINTS|PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB); | 
 |  | 
 |    /* gamma */ | 
 |    colorspace->gamma = PNG_GAMMA_sRGB_INVERSE; | 
 |    colorspace->flags |= PNG_COLORSPACE_HAVE_GAMMA; | 
 |  | 
 |    /* Finally record that we have an sRGB profile */ | 
 |    colorspace->flags |= | 
 |       (PNG_COLORSPACE_MATCHES_sRGB|PNG_COLORSPACE_FROM_sRGB); | 
 |  | 
 |    return 1; /* set */ | 
 | } | 
 | #endif /* sRGB */ | 
 |  | 
 | #ifdef PNG_iCCP_SUPPORTED | 
 | /* Encoded value of D50 as an ICC XYZNumber.  From the ICC 2010 spec the value | 
 |  * is XYZ(0.9642,1.0,0.8249), which scales to: | 
 |  * | 
 |  *    (63189.8112, 65536, 54060.6464) | 
 |  */ | 
 | static const png_byte D50_nCIEXYZ[12] = | 
 |    { 0x00, 0x00, 0xf6, 0xd6, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0xd3, 0x2d }; | 
 |  | 
 | static int /* bool */ | 
 | icc_check_length(png_const_structrp png_ptr, png_colorspacerp colorspace, | 
 |     png_const_charp name, png_uint_32 profile_length) | 
 | { | 
 |    if (profile_length < 132) | 
 |       return png_icc_profile_error(png_ptr, colorspace, name, profile_length, | 
 |           "too short"); | 
 |    return 1; | 
 | } | 
 |  | 
 | #ifdef PNG_READ_iCCP_SUPPORTED | 
 | int /* PRIVATE */ | 
 | png_icc_check_length(png_const_structrp png_ptr, png_colorspacerp colorspace, | 
 |     png_const_charp name, png_uint_32 profile_length) | 
 | { | 
 |    if (!icc_check_length(png_ptr, colorspace, name, profile_length)) | 
 |       return 0; | 
 |  | 
 |    /* This needs to be here because the 'normal' check is in | 
 |     * png_decompress_chunk, yet this happens after the attempt to | 
 |     * png_malloc_base the required data.  We only need this on read; on write | 
 |     * the caller supplies the profile buffer so libpng doesn't allocate it.  See | 
 |     * the call to icc_check_length below (the write case). | 
 |     */ | 
 | #  ifdef PNG_SET_USER_LIMITS_SUPPORTED | 
 |       else if (png_ptr->user_chunk_malloc_max > 0 && | 
 |                png_ptr->user_chunk_malloc_max < profile_length) | 
 |          return png_icc_profile_error(png_ptr, colorspace, name, profile_length, | 
 |              "exceeds application limits"); | 
 | #  elif PNG_USER_CHUNK_MALLOC_MAX > 0 | 
 |       else if (PNG_USER_CHUNK_MALLOC_MAX < profile_length) | 
 |          return png_icc_profile_error(png_ptr, colorspace, name, profile_length, | 
 |              "exceeds libpng limits"); | 
 | #  else /* !SET_USER_LIMITS */ | 
 |       /* This will get compiled out on all 32-bit and better systems. */ | 
 |       else if (PNG_SIZE_MAX < profile_length) | 
 |          return png_icc_profile_error(png_ptr, colorspace, name, profile_length, | 
 |              "exceeds system limits"); | 
 | #  endif /* !SET_USER_LIMITS */ | 
 |  | 
 |    return 1; | 
 | } | 
 | #endif /* READ_iCCP */ | 
 |  | 
 | int /* PRIVATE */ | 
 | png_icc_check_header(png_const_structrp png_ptr, png_colorspacerp colorspace, | 
 |     png_const_charp name, png_uint_32 profile_length, | 
 |     png_const_bytep profile/* first 132 bytes only */, int color_type) | 
 | { | 
 |    png_uint_32 temp; | 
 |  | 
 |    /* Length check; this cannot be ignored in this code because profile_length | 
 |     * is used later to check the tag table, so even if the profile seems over | 
 |     * long profile_length from the caller must be correct.  The caller can fix | 
 |     * this up on read or write by just passing in the profile header length. | 
 |     */ | 
 |    temp = png_get_uint_32(profile); | 
 |    if (temp != profile_length) | 
 |       return png_icc_profile_error(png_ptr, colorspace, name, temp, | 
 |           "length does not match profile"); | 
 |  | 
 |    temp = (png_uint_32) (*(profile+8)); | 
 |    if (temp > 3 && (profile_length & 3)) | 
 |       return png_icc_profile_error(png_ptr, colorspace, name, profile_length, | 
 |           "invalid length"); | 
 |  | 
 |    temp = png_get_uint_32(profile+128); /* tag count: 12 bytes/tag */ | 
 |    if (temp > 357913930 || /* (2^32-4-132)/12: maximum possible tag count */ | 
 |       profile_length < 132+12*temp) /* truncated tag table */ | 
 |       return png_icc_profile_error(png_ptr, colorspace, name, temp, | 
 |           "tag count too large"); | 
 |  | 
 |    /* The 'intent' must be valid or we can't store it, ICC limits the intent to | 
 |     * 16 bits. | 
 |     */ | 
 |    temp = png_get_uint_32(profile+64); | 
 |    if (temp >= 0xffff) /* The ICC limit */ | 
 |       return png_icc_profile_error(png_ptr, colorspace, name, temp, | 
 |           "invalid rendering intent"); | 
 |  | 
 |    /* This is just a warning because the profile may be valid in future | 
 |     * versions. | 
 |     */ | 
 |    if (temp >= PNG_sRGB_INTENT_LAST) | 
 |       (void)png_icc_profile_error(png_ptr, NULL, name, temp, | 
 |           "intent outside defined range"); | 
 |  | 
 |    /* At this point the tag table can't be checked because it hasn't necessarily | 
 |     * been loaded; however, various header fields can be checked.  These checks | 
 |     * are for values permitted by the PNG spec in an ICC profile; the PNG spec | 
 |     * restricts the profiles that can be passed in an iCCP chunk (they must be | 
 |     * appropriate to processing PNG data!) | 
 |     */ | 
 |  | 
 |    /* Data checks (could be skipped).  These checks must be independent of the | 
 |     * version number; however, the version number doesn't accommodate changes in | 
 |     * the header fields (just the known tags and the interpretation of the | 
 |     * data.) | 
 |     */ | 
 |    temp = png_get_uint_32(profile+36); /* signature 'ascp' */ | 
 |    if (temp != 0x61637370) | 
 |       return png_icc_profile_error(png_ptr, colorspace, name, temp, | 
 |           "invalid signature"); | 
 |  | 
 |    /* Currently the PCS illuminant/adopted white point (the computational | 
 |     * white point) are required to be D50, | 
 |     * however the profile contains a record of the illuminant so perhaps ICC | 
 |     * expects to be able to change this in the future (despite the rationale in | 
 |     * the introduction for using a fixed PCS adopted white.)  Consequently the | 
 |     * following is just a warning. | 
 |     */ | 
 |    if (memcmp(profile+68, D50_nCIEXYZ, 12) != 0) | 
 |       (void)png_icc_profile_error(png_ptr, NULL, name, 0/*no tag value*/, | 
 |           "PCS illuminant is not D50"); | 
 |  | 
 |    /* The PNG spec requires this: | 
 |     * "If the iCCP chunk is present, the image samples conform to the colour | 
 |     * space represented by the embedded ICC profile as defined by the | 
 |     * International Color Consortium [ICC]. The colour space of the ICC profile | 
 |     * shall be an RGB colour space for colour images (PNG colour types 2, 3, and | 
 |     * 6), or a greyscale colour space for greyscale images (PNG colour types 0 | 
 |     * and 4)." | 
 |     * | 
 |     * This checking code ensures the embedded profile (on either read or write) | 
 |     * conforms to the specification requirements.  Notice that an ICC 'gray' | 
 |     * color-space profile contains the information to transform the monochrome | 
 |     * data to XYZ or L*a*b (according to which PCS the profile uses) and this | 
 |     * should be used in preference to the standard libpng K channel replication | 
 |     * into R, G and B channels. | 
 |     * | 
 |     * Previously it was suggested that an RGB profile on grayscale data could be | 
 |     * handled.  However it it is clear that using an RGB profile in this context | 
 |     * must be an error - there is no specification of what it means.  Thus it is | 
 |     * almost certainly more correct to ignore the profile. | 
 |     */ | 
 |    temp = png_get_uint_32(profile+16); /* data colour space field */ | 
 |    switch (temp) | 
 |    { | 
 |       case 0x52474220: /* 'RGB ' */ | 
 |          if ((color_type & PNG_COLOR_MASK_COLOR) == 0) | 
 |             return png_icc_profile_error(png_ptr, colorspace, name, temp, | 
 |                 "RGB color space not permitted on grayscale PNG"); | 
 |          break; | 
 |  | 
 |       case 0x47524159: /* 'GRAY' */ | 
 |          if ((color_type & PNG_COLOR_MASK_COLOR) != 0) | 
 |             return png_icc_profile_error(png_ptr, colorspace, name, temp, | 
 |                 "Gray color space not permitted on RGB PNG"); | 
 |          break; | 
 |  | 
 |       default: | 
 |          return png_icc_profile_error(png_ptr, colorspace, name, temp, | 
 |              "invalid ICC profile color space"); | 
 |    } | 
 |  | 
 |    /* It is up to the application to check that the profile class matches the | 
 |     * application requirements; the spec provides no guidance, but it's pretty | 
 |     * weird if the profile is not scanner ('scnr'), monitor ('mntr'), printer | 
 |     * ('prtr') or 'spac' (for generic color spaces).  Issue a warning in these | 
 |     * cases.  Issue an error for device link or abstract profiles - these don't | 
 |     * contain the records necessary to transform the color-space to anything | 
 |     * other than the target device (and not even that for an abstract profile). | 
 |     * Profiles of these classes may not be embedded in images. | 
 |     */ | 
 |    temp = png_get_uint_32(profile+12); /* profile/device class */ | 
 |    switch (temp) | 
 |    { | 
 |       case 0x73636e72: /* 'scnr' */ | 
 |       case 0x6d6e7472: /* 'mntr' */ | 
 |       case 0x70727472: /* 'prtr' */ | 
 |       case 0x73706163: /* 'spac' */ | 
 |          /* All supported */ | 
 |          break; | 
 |  | 
 |       case 0x61627374: /* 'abst' */ | 
 |          /* May not be embedded in an image */ | 
 |          return png_icc_profile_error(png_ptr, colorspace, name, temp, | 
 |              "invalid embedded Abstract ICC profile"); | 
 |  | 
 |       case 0x6c696e6b: /* 'link' */ | 
 |          /* DeviceLink profiles cannot be interpreted in a non-device specific | 
 |           * fashion, if an app uses the AToB0Tag in the profile the results are | 
 |           * undefined unless the result is sent to the intended device, | 
 |           * therefore a DeviceLink profile should not be found embedded in a | 
 |           * PNG. | 
 |           */ | 
 |          return png_icc_profile_error(png_ptr, colorspace, name, temp, | 
 |              "unexpected DeviceLink ICC profile class"); | 
 |  | 
 |       case 0x6e6d636c: /* 'nmcl' */ | 
 |          /* A NamedColor profile is also device specific, however it doesn't | 
 |           * contain an AToB0 tag that is open to misinterpretation.  Almost | 
 |           * certainly it will fail the tests below. | 
 |           */ | 
 |          (void)png_icc_profile_error(png_ptr, NULL, name, temp, | 
 |              "unexpected NamedColor ICC profile class"); | 
 |          break; | 
 |  | 
 |       default: | 
 |          /* To allow for future enhancements to the profile accept unrecognized | 
 |           * profile classes with a warning, these then hit the test below on the | 
 |           * tag content to ensure they are backward compatible with one of the | 
 |           * understood profiles. | 
 |           */ | 
 |          (void)png_icc_profile_error(png_ptr, NULL, name, temp, | 
 |              "unrecognized ICC profile class"); | 
 |          break; | 
 |    } | 
 |  | 
 |    /* For any profile other than a device link one the PCS must be encoded | 
 |     * either in XYZ or Lab. | 
 |     */ | 
 |    temp = png_get_uint_32(profile+20); | 
 |    switch (temp) | 
 |    { | 
 |       case 0x58595a20: /* 'XYZ ' */ | 
 |       case 0x4c616220: /* 'Lab ' */ | 
 |          break; | 
 |  | 
 |       default: | 
 |          return png_icc_profile_error(png_ptr, colorspace, name, temp, | 
 |              "unexpected ICC PCS encoding"); | 
 |    } | 
 |  | 
 |    return 1; | 
 | } | 
 |  | 
 | int /* PRIVATE */ | 
 | png_icc_check_tag_table(png_const_structrp png_ptr, png_colorspacerp colorspace, | 
 |     png_const_charp name, png_uint_32 profile_length, | 
 |     png_const_bytep profile /* header plus whole tag table */) | 
 | { | 
 |    png_uint_32 tag_count = png_get_uint_32(profile+128); | 
 |    png_uint_32 itag; | 
 |    png_const_bytep tag = profile+132; /* The first tag */ | 
 |  | 
 |    /* First scan all the tags in the table and add bits to the icc_info value | 
 |     * (temporarily in 'tags'). | 
 |     */ | 
 |    for (itag=0; itag < tag_count; ++itag, tag += 12) | 
 |    { | 
 |       png_uint_32 tag_id = png_get_uint_32(tag+0); | 
 |       png_uint_32 tag_start = png_get_uint_32(tag+4); /* must be aligned */ | 
 |       png_uint_32 tag_length = png_get_uint_32(tag+8);/* not padded */ | 
 |  | 
 |       /* The ICC specification does not exclude zero length tags, therefore the | 
 |        * start might actually be anywhere if there is no data, but this would be | 
 |        * a clear abuse of the intent of the standard so the start is checked for | 
 |        * being in range.  All defined tag types have an 8 byte header - a 4 byte | 
 |        * type signature then 0. | 
 |        */ | 
 |  | 
 |       /* This is a hard error; potentially it can cause read outside the | 
 |        * profile. | 
 |        */ | 
 |       if (tag_start > profile_length || tag_length > profile_length - tag_start) | 
 |          return png_icc_profile_error(png_ptr, colorspace, name, tag_id, | 
 |              "ICC profile tag outside profile"); | 
 |  | 
 |       if ((tag_start & 3) != 0) | 
 |       { | 
 |          /* CNHP730S.icc shipped with Microsoft Windows 64 violates this; it is | 
 |           * only a warning here because libpng does not care about the | 
 |           * alignment. | 
 |           */ | 
 |          (void)png_icc_profile_error(png_ptr, NULL, name, tag_id, | 
 |              "ICC profile tag start not a multiple of 4"); | 
 |       } | 
 |    } | 
 |  | 
 |    return 1; /* success, maybe with warnings */ | 
 | } | 
 |  | 
 | #ifdef PNG_sRGB_SUPPORTED | 
 | #if PNG_sRGB_PROFILE_CHECKS >= 0 | 
 | /* Information about the known ICC sRGB profiles */ | 
 | static const struct | 
 | { | 
 |    png_uint_32 adler, crc, length; | 
 |    png_uint_32 md5[4]; | 
 |    png_byte    have_md5; | 
 |    png_byte    is_broken; | 
 |    png_uint_16 intent; | 
 |  | 
 | #  define PNG_MD5(a,b,c,d) { a, b, c, d }, (a!=0)||(b!=0)||(c!=0)||(d!=0) | 
 | #  define PNG_ICC_CHECKSUM(adler, crc, md5, intent, broke, date, length, fname)\ | 
 |       { adler, crc, length, md5, broke, intent }, | 
 |  | 
 | } png_sRGB_checks[] = | 
 | { | 
 |    /* This data comes from contrib/tools/checksum-icc run on downloads of | 
 |     * all four ICC sRGB profiles from www.color.org. | 
 |     */ | 
 |    /* adler32, crc32, MD5[4], intent, date, length, file-name */ | 
 |    PNG_ICC_CHECKSUM(0x0a3fd9f6, 0x3b8772b9, | 
 |        PNG_MD5(0x29f83dde, 0xaff255ae, 0x7842fae4, 0xca83390d), 0, 0, | 
 |        "2009/03/27 21:36:31", 3048, "sRGB_IEC61966-2-1_black_scaled.icc") | 
 |  | 
 |    /* ICC sRGB v2 perceptual no black-compensation: */ | 
 |    PNG_ICC_CHECKSUM(0x4909e5e1, 0x427ebb21, | 
 |        PNG_MD5(0xc95bd637, 0xe95d8a3b, 0x0df38f99, 0xc1320389), 1, 0, | 
 |        "2009/03/27 21:37:45", 3052, "sRGB_IEC61966-2-1_no_black_scaling.icc") | 
 |  | 
 |    PNG_ICC_CHECKSUM(0xfd2144a1, 0x306fd8ae, | 
 |        PNG_MD5(0xfc663378, 0x37e2886b, 0xfd72e983, 0x8228f1b8), 0, 0, | 
 |        "2009/08/10 17:28:01", 60988, "sRGB_v4_ICC_preference_displayclass.icc") | 
 |  | 
 |    /* ICC sRGB v4 perceptual */ | 
 |    PNG_ICC_CHECKSUM(0x209c35d2, 0xbbef7812, | 
 |        PNG_MD5(0x34562abf, 0x994ccd06, 0x6d2c5721, 0xd0d68c5d), 0, 0, | 
 |        "2007/07/25 00:05:37", 60960, "sRGB_v4_ICC_preference.icc") | 
 |  | 
 |    /* The following profiles have no known MD5 checksum. If there is a match | 
 |     * on the (empty) MD5 the other fields are used to attempt a match and | 
 |     * a warning is produced.  The first two of these profiles have a 'cprt' tag | 
 |     * which suggests that they were also made by Hewlett Packard. | 
 |     */ | 
 |    PNG_ICC_CHECKSUM(0xa054d762, 0x5d5129ce, | 
 |        PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 1, 0, | 
 |        "2004/07/21 18:57:42", 3024, "sRGB_IEC61966-2-1_noBPC.icc") | 
 |  | 
 |    /* This is a 'mntr' (display) profile with a mediaWhitePointTag that does not | 
 |     * match the D50 PCS illuminant in the header (it is in fact the D65 values, | 
 |     * so the white point is recorded as the un-adapted value.)  The profiles | 
 |     * below only differ in one byte - the intent - and are basically the same as | 
 |     * the previous profile except for the mediaWhitePointTag error and a missing | 
 |     * chromaticAdaptationTag. | 
 |     */ | 
 |    PNG_ICC_CHECKSUM(0xf784f3fb, 0x182ea552, | 
 |        PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 0, 1/*broken*/, | 
 |        "1998/02/09 06:49:00", 3144, "HP-Microsoft sRGB v2 perceptual") | 
 |  | 
 |    PNG_ICC_CHECKSUM(0x0398f3fc, 0xf29e526d, | 
 |        PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 1, 1/*broken*/, | 
 |        "1998/02/09 06:49:00", 3144, "HP-Microsoft sRGB v2 media-relative") | 
 | }; | 
 |  | 
 | static int | 
 | png_compare_ICC_profile_with_sRGB(png_const_structrp png_ptr, | 
 |     png_const_bytep profile, uLong adler) | 
 | { | 
 |    /* The quick check is to verify just the MD5 signature and trust the | 
 |     * rest of the data.  Because the profile has already been verified for | 
 |     * correctness this is safe.  png_colorspace_set_sRGB will check the 'intent' | 
 |     * field too, so if the profile has been edited with an intent not defined | 
 |     * by sRGB (but maybe defined by a later ICC specification) the read of | 
 |     * the profile will fail at that point. | 
 |     */ | 
 |  | 
 |    png_uint_32 length = 0; | 
 |    png_uint_32 intent = 0x10000; /* invalid */ | 
 | #if PNG_sRGB_PROFILE_CHECKS > 1 | 
 |    uLong crc = 0; /* the value for 0 length data */ | 
 | #endif | 
 |    unsigned int i; | 
 |  | 
 | #ifdef PNG_SET_OPTION_SUPPORTED | 
 |    /* First see if PNG_SKIP_sRGB_CHECK_PROFILE has been set to "on" */ | 
 |    if (((png_ptr->options >> PNG_SKIP_sRGB_CHECK_PROFILE) & 3) == | 
 |                PNG_OPTION_ON) | 
 |       return 0; | 
 | #endif | 
 |  | 
 |    for (i=0; i < (sizeof png_sRGB_checks) / (sizeof png_sRGB_checks[0]); ++i) | 
 |    { | 
 |       if (png_get_uint_32(profile+84) == png_sRGB_checks[i].md5[0] && | 
 |          png_get_uint_32(profile+88) == png_sRGB_checks[i].md5[1] && | 
 |          png_get_uint_32(profile+92) == png_sRGB_checks[i].md5[2] && | 
 |          png_get_uint_32(profile+96) == png_sRGB_checks[i].md5[3]) | 
 |       { | 
 |          /* This may be one of the old HP profiles without an MD5, in that | 
 |           * case we can only use the length and Adler32 (note that these | 
 |           * are not used by default if there is an MD5!) | 
 |           */ | 
 | #        if PNG_sRGB_PROFILE_CHECKS == 0 | 
 |             if (png_sRGB_checks[i].have_md5 != 0) | 
 |                return 1+png_sRGB_checks[i].is_broken; | 
 | #        endif | 
 |  | 
 |          /* Profile is unsigned or more checks have been configured in. */ | 
 |          if (length == 0) | 
 |          { | 
 |             length = png_get_uint_32(profile); | 
 |             intent = png_get_uint_32(profile+64); | 
 |          } | 
 |  | 
 |          /* Length *and* intent must match */ | 
 |          if (length == (png_uint_32) png_sRGB_checks[i].length && | 
 |             intent == (png_uint_32) png_sRGB_checks[i].intent) | 
 |          { | 
 |             /* Now calculate the adler32 if not done already. */ | 
 |             if (adler == 0) | 
 |             { | 
 |                adler = adler32(0, NULL, 0); | 
 |                adler = adler32(adler, profile, length); | 
 |             } | 
 |  | 
 |             if (adler == png_sRGB_checks[i].adler) | 
 |             { | 
 |                /* These basic checks suggest that the data has not been | 
 |                 * modified, but if the check level is more than 1 perform | 
 |                 * our own crc32 checksum on the data. | 
 |                 */ | 
 | #              if PNG_sRGB_PROFILE_CHECKS > 1 | 
 |                   if (crc == 0) | 
 |                   { | 
 |                      crc = crc32(0, NULL, 0); | 
 |                      crc = crc32(crc, profile, length); | 
 |                   } | 
 |  | 
 |                   /* So this check must pass for the 'return' below to happen. | 
 |                    */ | 
 |                   if (crc == png_sRGB_checks[i].crc) | 
 | #              endif | 
 |                { | 
 |                   if (png_sRGB_checks[i].is_broken != 0) | 
 |                   { | 
 |                      /* These profiles are known to have bad data that may cause | 
 |                       * problems if they are used, therefore attempt to | 
 |                       * discourage their use, skip the 'have_md5' warning below, | 
 |                       * which is made irrelevant by this error. | 
 |                       */ | 
 |                      png_chunk_report(png_ptr, "known incorrect sRGB profile", | 
 |                          PNG_CHUNK_ERROR); | 
 |                   } | 
 |  | 
 |                   /* Warn that this being done; this isn't even an error since | 
 |                    * the profile is perfectly valid, but it would be nice if | 
 |                    * people used the up-to-date ones. | 
 |                    */ | 
 |                   else if (png_sRGB_checks[i].have_md5 == 0) | 
 |                   { | 
 |                      png_chunk_report(png_ptr, | 
 |                          "out-of-date sRGB profile with no signature", | 
 |                          PNG_CHUNK_WARNING); | 
 |                   } | 
 |  | 
 |                   return 1+png_sRGB_checks[i].is_broken; | 
 |                } | 
 |             } | 
 |  | 
 | # if PNG_sRGB_PROFILE_CHECKS > 0 | 
 |          /* The signature matched, but the profile had been changed in some | 
 |           * way.  This probably indicates a data error or uninformed hacking. | 
 |           * Fall through to "no match". | 
 |           */ | 
 |          png_chunk_report(png_ptr, | 
 |              "Not recognizing known sRGB profile that has been edited", | 
 |              PNG_CHUNK_WARNING); | 
 |          break; | 
 | # endif | 
 |          } | 
 |       } | 
 |    } | 
 |  | 
 |    return 0; /* no match */ | 
 | } | 
 |  | 
 | void /* PRIVATE */ | 
 | png_icc_set_sRGB(png_const_structrp png_ptr, | 
 |     png_colorspacerp colorspace, png_const_bytep profile, uLong adler) | 
 | { | 
 |    /* Is this profile one of the known ICC sRGB profiles?  If it is, just set | 
 |     * the sRGB information. | 
 |     */ | 
 |    if (png_compare_ICC_profile_with_sRGB(png_ptr, profile, adler) != 0) | 
 |       (void)png_colorspace_set_sRGB(png_ptr, colorspace, | 
 |          (int)/*already checked*/png_get_uint_32(profile+64)); | 
 | } | 
 | #endif /* PNG_sRGB_PROFILE_CHECKS >= 0 */ | 
 | #endif /* sRGB */ | 
 |  | 
 | int /* PRIVATE */ | 
 | png_colorspace_set_ICC(png_const_structrp png_ptr, png_colorspacerp colorspace, | 
 |     png_const_charp name, png_uint_32 profile_length, png_const_bytep profile, | 
 |     int color_type) | 
 | { | 
 |    if ((colorspace->flags & PNG_COLORSPACE_INVALID) != 0) | 
 |       return 0; | 
 |  | 
 |    if (icc_check_length(png_ptr, colorspace, name, profile_length) != 0 && | 
 |        png_icc_check_header(png_ptr, colorspace, name, profile_length, profile, | 
 |            color_type) != 0 && | 
 |        png_icc_check_tag_table(png_ptr, colorspace, name, profile_length, | 
 |            profile) != 0) | 
 |    { | 
 | #     if defined(PNG_sRGB_SUPPORTED) && PNG_sRGB_PROFILE_CHECKS >= 0 | 
 |          /* If no sRGB support, don't try storing sRGB information */ | 
 |          png_icc_set_sRGB(png_ptr, colorspace, profile, 0); | 
 | #     endif | 
 |       return 1; | 
 |    } | 
 |  | 
 |    /* Failure case */ | 
 |    return 0; | 
 | } | 
 | #endif /* iCCP */ | 
 |  | 
 | #ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED | 
 | void /* PRIVATE */ | 
 | png_colorspace_set_rgb_coefficients(png_structrp png_ptr) | 
 | { | 
 |    /* Set the rgb_to_gray coefficients from the colorspace. */ | 
 |    if (png_ptr->rgb_to_gray_coefficients_set == 0 && | 
 |       (png_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS) != 0) | 
 |    { | 
 |       /* png_set_background has not been called, get the coefficients from the Y | 
 |        * values of the colorspace colorants. | 
 |        */ | 
 |       png_fixed_point r = png_ptr->colorspace.end_points_XYZ.red_Y; | 
 |       png_fixed_point g = png_ptr->colorspace.end_points_XYZ.green_Y; | 
 |       png_fixed_point b = png_ptr->colorspace.end_points_XYZ.blue_Y; | 
 |       png_fixed_point total = r+g+b; | 
 |  | 
 |       if (total > 0 && | 
 |          r >= 0 && png_muldiv(&r, r, 32768, total) && r >= 0 && r <= 32768 && | 
 |          g >= 0 && png_muldiv(&g, g, 32768, total) && g >= 0 && g <= 32768 && | 
 |          b >= 0 && png_muldiv(&b, b, 32768, total) && b >= 0 && b <= 32768 && | 
 |          r+g+b <= 32769) | 
 |       { | 
 |          /* We allow 0 coefficients here.  r+g+b may be 32769 if two or | 
 |           * all of the coefficients were rounded up.  Handle this by | 
 |           * reducing the *largest* coefficient by 1; this matches the | 
 |           * approach used for the default coefficients in pngrtran.c | 
 |           */ | 
 |          int add = 0; | 
 |  | 
 |          if (r+g+b > 32768) | 
 |             add = -1; | 
 |          else if (r+g+b < 32768) | 
 |             add = 1; | 
 |  | 
 |          if (add != 0) | 
 |          { | 
 |             if (g >= r && g >= b) | 
 |                g += add; | 
 |             else if (r >= g && r >= b) | 
 |                r += add; | 
 |             else | 
 |                b += add; | 
 |          } | 
 |  | 
 |          /* Check for an internal error. */ | 
 |          if (r+g+b != 32768) | 
 |             png_error(png_ptr, | 
 |                 "internal error handling cHRM coefficients"); | 
 |  | 
 |          else | 
 |          { | 
 |             png_ptr->rgb_to_gray_red_coeff   = (png_uint_16)r; | 
 |             png_ptr->rgb_to_gray_green_coeff = (png_uint_16)g; | 
 |          } | 
 |       } | 
 |  | 
 |       /* This is a png_error at present even though it could be ignored - | 
 |        * it should never happen, but it is important that if it does, the | 
 |        * bug is fixed. | 
 |        */ | 
 |       else | 
 |          png_error(png_ptr, "internal error handling cHRM->XYZ"); | 
 |    } | 
 | } | 
 | #endif /* READ_RGB_TO_GRAY */ | 
 |  | 
 | #endif /* COLORSPACE */ | 
 |  | 
 | /* #ifdef __GNUC__ */ | 
 | #if 1 | 
 | /* This exists solely to work round a warning from GNU C. */ | 
 | static int /* PRIVATE */ | 
 | png_gt(size_t a, size_t b) | 
 | { | 
 |    return a > b; | 
 | } | 
 | #else | 
 | #   define png_gt(a,b) ((a) > (b)) | 
 | #endif | 
 |  | 
 | void /* PRIVATE */ | 
 | png_check_IHDR(png_const_structrp png_ptr, | 
 |     png_uint_32 width, png_uint_32 height, int bit_depth, | 
 |     int color_type, int interlace_type, int compression_type, | 
 |     int filter_type) | 
 | { | 
 |    int error = 0; | 
 |  | 
 |    /* Check for width and height valid values */ | 
 |    if (width == 0) | 
 |    { | 
 |       png_warning(png_ptr, "Image width is zero in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 |    if (width > PNG_UINT_31_MAX) | 
 |    { | 
 |       png_warning(png_ptr, "Invalid image width in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 |    if (png_gt(((width + 7) & (~7U)), | 
 |        ((PNG_SIZE_MAX | 
 |            - 48        /* big_row_buf hack */ | 
 |            - 1)        /* filter byte */ | 
 |            / 8)        /* 8-byte RGBA pixels */ | 
 |            - 1))       /* extra max_pixel_depth pad */ | 
 |    { | 
 |       /* The size of the row must be within the limits of this architecture. | 
 |        * Because the read code can perform arbitrary transformations the | 
 |        * maximum size is checked here.  Because the code in png_read_start_row | 
 |        * adds extra space "for safety's sake" in several places a conservative | 
 |        * limit is used here. | 
 |        * | 
 |        * NOTE: it would be far better to check the size that is actually used, | 
 |        * but the effect in the real world is minor and the changes are more | 
 |        * extensive, therefore much more dangerous and much more difficult to | 
 |        * write in a way that avoids compiler warnings. | 
 |        */ | 
 |       png_warning(png_ptr, "Image width is too large for this architecture"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 | #ifdef PNG_SET_USER_LIMITS_SUPPORTED | 
 |    if (width > png_ptr->user_width_max) | 
 | #else | 
 |    if (width > PNG_USER_WIDTH_MAX) | 
 | #endif | 
 |    { | 
 |       png_warning(png_ptr, "Image width exceeds user limit in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 |    if (height == 0) | 
 |    { | 
 |       png_warning(png_ptr, "Image height is zero in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 |    if (height > PNG_UINT_31_MAX) | 
 |    { | 
 |       png_warning(png_ptr, "Invalid image height in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 | #ifdef PNG_SET_USER_LIMITS_SUPPORTED | 
 |    if (height > png_ptr->user_height_max) | 
 | #else | 
 |    if (height > PNG_USER_HEIGHT_MAX) | 
 | #endif | 
 |    { | 
 |       png_warning(png_ptr, "Image height exceeds user limit in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 |    /* Check other values */ | 
 |    if (bit_depth != 1 && bit_depth != 2 && bit_depth != 4 && | 
 |        bit_depth != 8 && bit_depth != 16) | 
 |    { | 
 |       png_warning(png_ptr, "Invalid bit depth in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 |    if (color_type < 0 || color_type == 1 || | 
 |        color_type == 5 || color_type > 6) | 
 |    { | 
 |       png_warning(png_ptr, "Invalid color type in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 |    if (((color_type == PNG_COLOR_TYPE_PALETTE) && bit_depth > 8) || | 
 |        ((color_type == PNG_COLOR_TYPE_RGB || | 
 |          color_type == PNG_COLOR_TYPE_GRAY_ALPHA || | 
 |          color_type == PNG_COLOR_TYPE_RGB_ALPHA) && bit_depth < 8)) | 
 |    { | 
 |       png_warning(png_ptr, "Invalid color type/bit depth combination in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 |    if (interlace_type >= PNG_INTERLACE_LAST) | 
 |    { | 
 |       png_warning(png_ptr, "Unknown interlace method in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 |    if (compression_type != PNG_COMPRESSION_TYPE_BASE) | 
 |    { | 
 |       png_warning(png_ptr, "Unknown compression method in IHDR"); | 
 |       error = 1; | 
 |    } | 
 |  | 
 | #ifdef PNG_MNG_FEATURES_SUPPORTED | 
 |    /* Accept filter_method 64 (intrapixel differencing) only if | 
 |     * 1. Libpng was compiled with PNG_MNG_FEATURES_SUPPORTED and | 
 |     * 2. Libpng did not read a PNG signature (this filter_method is only | 
 |     *    used in PNG datastreams that are embedded in MNG datastreams) and | 
 |     * 3. The application called png_permit_mng_features with a mask that | 
 |     *    included PNG_FLAG_MNG_FILTER_64 and | 
 |     * 4. The filter_method is 64 and | 
 |     * 5. The color_type is RGB or RGBA | 
 |     */ | 
 |    if ((png_ptr->mode & PNG_HAVE_PNG_SIGNATURE) != 0 && | 
 |        png_ptr->mng_features_permitted != 0) | 
 |       png_warning(png_ptr, "MNG features are not allowed in a PNG datastream"); | 
 |  | 
 |    if (filter_type != PNG_FILTER_TYPE_BASE) | 
 |    { | 
 |       if (!((png_ptr->mng_features_permitted & PNG_FLAG_MNG_FILTER_64) != 0 && | 
 |           (filter_type == PNG_INTRAPIXEL_DIFFERENCING) && | 
 |           ((png_ptr->mode & PNG_HAVE_PNG_SIGNATURE) == 0) && | 
 |           (color_type == PNG_COLOR_TYPE_RGB || | 
 |           color_type == PNG_COLOR_TYPE_RGB_ALPHA))) | 
 |       { | 
 |          png_warning(png_ptr, "Unknown filter method in IHDR"); | 
 |          error = 1; | 
 |       } | 
 |  | 
 |       if ((png_ptr->mode & PNG_HAVE_PNG_SIGNATURE) != 0) | 
 |       { | 
 |          png_warning(png_ptr, "Invalid filter method in IHDR"); | 
 |          error = 1; | 
 |       } | 
 |    } | 
 |  | 
 | #else | 
 |    if (filter_type != PNG_FILTER_TYPE_BASE) | 
 |    { | 
 |       png_warning(png_ptr, "Unknown filter method in IHDR"); | 
 |       error = 1; | 
 |    } | 
 | #endif | 
 |  | 
 |    if (error == 1) | 
 |       png_error(png_ptr, "Invalid IHDR data"); | 
 | } | 
 |  | 
 | #if defined(PNG_sCAL_SUPPORTED) || defined(PNG_pCAL_SUPPORTED) | 
 | /* ASCII to fp functions */ | 
 | /* Check an ASCII formatted floating point value, see the more detailed | 
 |  * comments in pngpriv.h | 
 |  */ | 
 | /* The following is used internally to preserve the sticky flags */ | 
 | #define png_fp_add(state, flags) ((state) |= (flags)) | 
 | #define png_fp_set(state, value) ((state) = (value) | ((state) & PNG_FP_STICKY)) | 
 |  | 
 | int /* PRIVATE */ | 
 | png_check_fp_number(png_const_charp string, size_t size, int *statep, | 
 |     png_size_tp whereami) | 
 | { | 
 |    int state = *statep; | 
 |    size_t i = *whereami; | 
 |  | 
 |    while (i < size) | 
 |    { | 
 |       int type; | 
 |       /* First find the type of the next character */ | 
 |       switch (string[i]) | 
 |       { | 
 |       case 43:  type = PNG_FP_SAW_SIGN;                   break; | 
 |       case 45:  type = PNG_FP_SAW_SIGN + PNG_FP_NEGATIVE; break; | 
 |       case 46:  type = PNG_FP_SAW_DOT;                    break; | 
 |       case 48:  type = PNG_FP_SAW_DIGIT;                  break; | 
 |       case 49: case 50: case 51: case 52: | 
 |       case 53: case 54: case 55: case 56: | 
 |       case 57:  type = PNG_FP_SAW_DIGIT + PNG_FP_NONZERO; break; | 
 |       case 69: | 
 |       case 101: type = PNG_FP_SAW_E;                      break; | 
 |       default:  goto PNG_FP_End; | 
 |       } | 
 |  | 
 |       /* Now deal with this type according to the current | 
 |        * state, the type is arranged to not overlap the | 
 |        * bits of the PNG_FP_STATE. | 
 |        */ | 
 |       switch ((state & PNG_FP_STATE) + (type & PNG_FP_SAW_ANY)) | 
 |       { | 
 |       case PNG_FP_INTEGER + PNG_FP_SAW_SIGN: | 
 |          if ((state & PNG_FP_SAW_ANY) != 0) | 
 |             goto PNG_FP_End; /* not a part of the number */ | 
 |  | 
 |          png_fp_add(state, type); | 
 |          break; | 
 |  | 
 |       case PNG_FP_INTEGER + PNG_FP_SAW_DOT: | 
 |          /* Ok as trailer, ok as lead of fraction. */ | 
 |          if ((state & PNG_FP_SAW_DOT) != 0) /* two dots */ | 
 |             goto PNG_FP_End; | 
 |  | 
 |          else if ((state & PNG_FP_SAW_DIGIT) != 0) /* trailing dot? */ | 
 |             png_fp_add(state, type); | 
 |  | 
 |          else | 
 |             png_fp_set(state, PNG_FP_FRACTION | type); | 
 |  | 
 |          break; | 
 |  | 
 |       case PNG_FP_INTEGER + PNG_FP_SAW_DIGIT: | 
 |          if ((state & PNG_FP_SAW_DOT) != 0) /* delayed fraction */ | 
 |             png_fp_set(state, PNG_FP_FRACTION | PNG_FP_SAW_DOT); | 
 |  | 
 |          png_fp_add(state, type | PNG_FP_WAS_VALID); | 
 |  | 
 |          break; | 
 |  | 
 |       case PNG_FP_INTEGER + PNG_FP_SAW_E: | 
 |          if ((state & PNG_FP_SAW_DIGIT) == 0) | 
 |             goto PNG_FP_End; | 
 |  | 
 |          png_fp_set(state, PNG_FP_EXPONENT); | 
 |  | 
 |          break; | 
 |  | 
 |    /* case PNG_FP_FRACTION + PNG_FP_SAW_SIGN: | 
 |          goto PNG_FP_End; ** no sign in fraction */ | 
 |  | 
 |    /* case PNG_FP_FRACTION + PNG_FP_SAW_DOT: | 
 |          goto PNG_FP_End; ** Because SAW_DOT is always set */ | 
 |  | 
 |       case PNG_FP_FRACTION + PNG_FP_SAW_DIGIT: | 
 |          png_fp_add(state, type | PNG_FP_WAS_VALID); | 
 |          break; | 
 |  | 
 |       case PNG_FP_FRACTION + PNG_FP_SAW_E: | 
 |          /* This is correct because the trailing '.' on an | 
 |           * integer is handled above - so we can only get here | 
 |           * with the sequence ".E" (with no preceding digits). | 
 |           */ | 
 |          if ((state & PNG_FP_SAW_DIGIT) == 0) | 
 |             goto PNG_FP_End; | 
 |  | 
 |          png_fp_set(state, PNG_FP_EXPONENT); | 
 |  | 
 |          break; | 
 |  | 
 |       case PNG_FP_EXPONENT + PNG_FP_SAW_SIGN: | 
 |          if ((state & PNG_FP_SAW_ANY) != 0) | 
 |             goto PNG_FP_End; /* not a part of the number */ | 
 |  | 
 |          png_fp_add(state, PNG_FP_SAW_SIGN); | 
 |  | 
 |          break; | 
 |  | 
 |    /* case PNG_FP_EXPONENT + PNG_FP_SAW_DOT: | 
 |          goto PNG_FP_End; */ | 
 |  | 
 |       case PNG_FP_EXPONENT + PNG_FP_SAW_DIGIT: | 
 |          png_fp_add(state, PNG_FP_SAW_DIGIT | PNG_FP_WAS_VALID); | 
 |  | 
 |          break; | 
 |  | 
 |    /* case PNG_FP_EXPONEXT + PNG_FP_SAW_E: | 
 |          goto PNG_FP_End; */ | 
 |  | 
 |       default: goto PNG_FP_End; /* I.e. break 2 */ | 
 |       } | 
 |  | 
 |       /* The character seems ok, continue. */ | 
 |       ++i; | 
 |    } | 
 |  | 
 | PNG_FP_End: | 
 |    /* Here at the end, update the state and return the correct | 
 |     * return code. | 
 |     */ | 
 |    *statep = state; | 
 |    *whereami = i; | 
 |  | 
 |    return (state & PNG_FP_SAW_DIGIT) != 0; | 
 | } | 
 |  | 
 |  | 
 | /* The same but for a complete string. */ | 
 | int | 
 | png_check_fp_string(png_const_charp string, size_t size) | 
 | { | 
 |    int        state=0; | 
 |    size_t char_index=0; | 
 |  | 
 |    if (png_check_fp_number(string, size, &state, &char_index) != 0 && | 
 |       (char_index == size || string[char_index] == 0)) | 
 |       return state /* must be non-zero - see above */; | 
 |  | 
 |    return 0; /* i.e. fail */ | 
 | } | 
 | #endif /* pCAL || sCAL */ | 
 |  | 
 | #ifdef PNG_sCAL_SUPPORTED | 
 | #  ifdef PNG_FLOATING_POINT_SUPPORTED | 
 | /* Utility used below - a simple accurate power of ten from an integral | 
 |  * exponent. | 
 |  */ | 
 | static double | 
 | png_pow10(int power) | 
 | { | 
 |    int recip = 0; | 
 |    double d = 1; | 
 |  | 
 |    /* Handle negative exponent with a reciprocal at the end because | 
 |     * 10 is exact whereas .1 is inexact in base 2 | 
 |     */ | 
 |    if (power < 0) | 
 |    { | 
 |       if (power < DBL_MIN_10_EXP) return 0; | 
 |       recip = 1; power = -power; | 
 |    } | 
 |  | 
 |    if (power > 0) | 
 |    { | 
 |       /* Decompose power bitwise. */ | 
 |       double mult = 10; | 
 |       do | 
 |       { | 
 |          if (power & 1) d *= mult; | 
 |          mult *= mult; | 
 |          power >>= 1; | 
 |       } | 
 |       while (power > 0); | 
 |  | 
 |       if (recip != 0) d = 1/d; | 
 |    } | 
 |    /* else power is 0 and d is 1 */ | 
 |  | 
 |    return d; | 
 | } | 
 |  | 
 | /* Function to format a floating point value in ASCII with a given | 
 |  * precision. | 
 |  */ | 
 | #if GCC_STRICT_OVERFLOW | 
 | #pragma GCC diagnostic push | 
 | /* The problem arises below with exp_b10, which can never overflow because it | 
 |  * comes, originally, from frexp and is therefore limited to a range which is | 
 |  * typically +/-710 (log2(DBL_MAX)/log2(DBL_MIN)). | 
 |  */ | 
 | #pragma GCC diagnostic warning "-Wstrict-overflow=2" | 
 | #endif /* GCC_STRICT_OVERFLOW */ | 
 | void /* PRIVATE */ | 
 | png_ascii_from_fp(png_const_structrp png_ptr, png_charp ascii, size_t size, | 
 |     double fp, unsigned int precision) | 
 | { | 
 |    /* We use standard functions from math.h, but not printf because | 
 |     * that would require stdio.  The caller must supply a buffer of | 
 |     * sufficient size or we will png_error.  The tests on size and | 
 |     * the space in ascii[] consumed are indicated below. | 
 |     */ | 
 |    if (precision < 1) | 
 |       precision = DBL_DIG; | 
 |  | 
 |    /* Enforce the limit of the implementation precision too. */ | 
 |    if (precision > DBL_DIG+1) | 
 |       precision = DBL_DIG+1; | 
 |  | 
 |    /* Basic sanity checks */ | 
 |    if (size >= precision+5) /* See the requirements below. */ | 
 |    { | 
 |       if (fp < 0) | 
 |       { | 
 |          fp = -fp; | 
 |          *ascii++ = 45; /* '-'  PLUS 1 TOTAL 1 */ | 
 |          --size; | 
 |       } | 
 |  | 
 |       if (fp >= DBL_MIN && fp <= DBL_MAX) | 
 |       { | 
 |          int exp_b10;   /* A base 10 exponent */ | 
 |          double base;   /* 10^exp_b10 */ | 
 |  | 
 |          /* First extract a base 10 exponent of the number, | 
 |           * the calculation below rounds down when converting | 
 |           * from base 2 to base 10 (multiply by log10(2) - | 
 |           * 0.3010, but 77/256 is 0.3008, so exp_b10 needs to | 
 |           * be increased.  Note that the arithmetic shift | 
 |           * performs a floor() unlike C arithmetic - using a | 
 |           * C multiply would break the following for negative | 
 |           * exponents. | 
 |           */ | 
 |          (void)frexp(fp, &exp_b10); /* exponent to base 2 */ | 
 |  | 
 |          exp_b10 = (exp_b10 * 77) >> 8; /* <= exponent to base 10 */ | 
 |  | 
 |          /* Avoid underflow here. */ | 
 |          base = png_pow10(exp_b10); /* May underflow */ | 
 |  | 
 |          while (base < DBL_MIN || base < fp) | 
 |          { | 
 |             /* And this may overflow. */ | 
 |             double test = png_pow10(exp_b10+1); | 
 |  | 
 |             if (test <= DBL_MAX) | 
 |             { | 
 |                ++exp_b10; base = test; | 
 |             } | 
 |  | 
 |             else | 
 |                break; | 
 |          } | 
 |  | 
 |          /* Normalize fp and correct exp_b10, after this fp is in the | 
 |           * range [.1,1) and exp_b10 is both the exponent and the digit | 
 |           * *before* which the decimal point should be inserted | 
 |           * (starting with 0 for the first digit).  Note that this | 
 |           * works even if 10^exp_b10 is out of range because of the | 
 |           * test on DBL_MAX above. | 
 |           */ | 
 |          fp /= base; | 
 |          while (fp >= 1) | 
 |          { | 
 |             fp /= 10; ++exp_b10; | 
 |          } | 
 |  | 
 |          /* Because of the code above fp may, at this point, be | 
 |           * less than .1, this is ok because the code below can | 
 |           * handle the leading zeros this generates, so no attempt | 
 |           * is made to correct that here. | 
 |           */ | 
 |  | 
 |          { | 
 |             unsigned int czero, clead, cdigits; | 
 |             char exponent[10]; | 
 |  | 
 |             /* Allow up to two leading zeros - this will not lengthen | 
 |              * the number compared to using E-n. | 
 |              */ | 
 |             if (exp_b10 < 0 && exp_b10 > -3) /* PLUS 3 TOTAL 4 */ | 
 |             { | 
 |                czero = 0U-exp_b10; /* PLUS 2 digits: TOTAL 3 */ | 
 |                exp_b10 = 0;      /* Dot added below before first output. */ | 
 |             } | 
 |             else | 
 |                czero = 0;    /* No zeros to add */ | 
 |  | 
 |             /* Generate the digit list, stripping trailing zeros and | 
 |              * inserting a '.' before a digit if the exponent is 0. | 
 |              */ | 
 |             clead = czero; /* Count of leading zeros */ | 
 |             cdigits = 0;   /* Count of digits in list. */ | 
 |  | 
 |             do | 
 |             { | 
 |                double d; | 
 |  | 
 |                fp *= 10; | 
 |                /* Use modf here, not floor and subtract, so that | 
 |                 * the separation is done in one step.  At the end | 
 |                 * of the loop don't break the number into parts so | 
 |                 * that the final digit is rounded. | 
 |                 */ | 
 |                if (cdigits+czero+1 < precision+clead) | 
 |                   fp = modf(fp, &d); | 
 |  | 
 |                else | 
 |                { | 
 |                   d = floor(fp + .5); | 
 |  | 
 |                   if (d > 9) | 
 |                   { | 
 |                      /* Rounding up to 10, handle that here. */ | 
 |                      if (czero > 0) | 
 |                      { | 
 |                         --czero; d = 1; | 
 |                         if (cdigits == 0) --clead; | 
 |                      } | 
 |                      else | 
 |                      { | 
 |                         while (cdigits > 0 && d > 9) | 
 |                         { | 
 |                            int ch = *--ascii; | 
 |  | 
 |                            if (exp_b10 != (-1)) | 
 |                               ++exp_b10; | 
 |  | 
 |                            else if (ch == 46) | 
 |                            { | 
 |                               ch = *--ascii; ++size; | 
 |                               /* Advance exp_b10 to '1', so that the | 
 |                                * decimal point happens after the | 
 |                                * previous digit. | 
 |                                */ | 
 |                               exp_b10 = 1; | 
 |                            } | 
 |  | 
 |                            --cdigits; | 
 |                            d = ch - 47;  /* I.e. 1+(ch-48) */ | 
 |                         } | 
 |  | 
 |                         /* Did we reach the beginning? If so adjust the | 
 |                          * exponent but take into account the leading | 
 |                          * decimal point. | 
 |                          */ | 
 |                         if (d > 9)  /* cdigits == 0 */ | 
 |                         { | 
 |                            if (exp_b10 == (-1)) | 
 |                            { | 
 |                               /* Leading decimal point (plus zeros?), if | 
 |                                * we lose the decimal point here it must | 
 |                                * be reentered below. | 
 |                                */ | 
 |                               int ch = *--ascii; | 
 |  | 
 |                               if (ch == 46) | 
 |                               { | 
 |                                  ++size; exp_b10 = 1; | 
 |                               } | 
 |  | 
 |                               /* Else lost a leading zero, so 'exp_b10' is | 
 |                                * still ok at (-1) | 
 |                                */ | 
 |                            } | 
 |                            else | 
 |                               ++exp_b10; | 
 |  | 
 |                            /* In all cases we output a '1' */ | 
 |                            d = 1; | 
 |                         } | 
 |                      } | 
 |                   } | 
 |                   fp = 0; /* Guarantees termination below. */ | 
 |                } | 
 |  | 
 |                if (d == 0) | 
 |                { | 
 |                   ++czero; | 
 |                   if (cdigits == 0) ++clead; | 
 |                } | 
 |                else | 
 |                { | 
 |                   /* Included embedded zeros in the digit count. */ | 
 |                   cdigits += czero - clead; | 
 |                   clead = 0; | 
 |  | 
 |                   while (czero > 0) | 
 |                   { | 
 |                      /* exp_b10 == (-1) means we just output the decimal | 
 |                       * place - after the DP don't adjust 'exp_b10' any | 
 |                       * more! | 
 |                       */ | 
 |                      if (exp_b10 != (-1)) | 
 |                      { | 
 |                         if (exp_b10 == 0) | 
 |                         { | 
 |                            *ascii++ = 46; --size; | 
 |                         } | 
 |                         /* PLUS 1: TOTAL 4 */ | 
 |                         --exp_b10; | 
 |                      } | 
 |                      *ascii++ = 48; --czero; | 
 |                   } | 
 |  | 
 |                   if (exp_b10 != (-1)) | 
 |                   { | 
 |                      if (exp_b10 == 0) | 
 |                      { | 
 |                         *ascii++ = 46; --size; /* counted above */ | 
 |                      } | 
 |  | 
 |                      --exp_b10; | 
 |                   } | 
 |                   *ascii++ = (char)(48 + (int)d); ++cdigits; | 
 |                } | 
 |             } | 
 |             while (cdigits+czero < precision+clead && fp > DBL_MIN); | 
 |  | 
 |             /* The total output count (max) is now 4+precision */ | 
 |  | 
 |             /* Check for an exponent, if we don't need one we are | 
 |              * done and just need to terminate the string.  At this | 
 |              * point, exp_b10==(-1) is effectively a flag: it got | 
 |              * to '-1' because of the decrement, after outputting | 
 |              * the decimal point above. (The exponent required is | 
 |              * *not* -1.) | 
 |              */ | 
 |             if (exp_b10 >= (-1) && exp_b10 <= 2) | 
 |             { | 
 |                /* The following only happens if we didn't output the | 
 |                 * leading zeros above for negative exponent, so this | 
 |                 * doesn't add to the digit requirement.  Note that the | 
 |                 * two zeros here can only be output if the two leading | 
 |                 * zeros were *not* output, so this doesn't increase | 
 |                 * the output count. | 
 |                 */ | 
 |                while (exp_b10-- > 0) *ascii++ = 48; | 
 |  | 
 |                *ascii = 0; | 
 |  | 
 |                /* Total buffer requirement (including the '\0') is | 
 |                 * 5+precision - see check at the start. | 
 |                 */ | 
 |                return; | 
 |             } | 
 |  | 
 |             /* Here if an exponent is required, adjust size for | 
 |              * the digits we output but did not count.  The total | 
 |              * digit output here so far is at most 1+precision - no | 
 |              * decimal point and no leading or trailing zeros have | 
 |              * been output. | 
 |              */ | 
 |             size -= cdigits; | 
 |  | 
 |             *ascii++ = 69; --size;    /* 'E': PLUS 1 TOTAL 2+precision */ | 
 |  | 
 |             /* The following use of an unsigned temporary avoids ambiguities in | 
 |              * the signed arithmetic on exp_b10 and permits GCC at least to do | 
 |              * better optimization. | 
 |              */ | 
 |             { | 
 |                unsigned int uexp_b10; | 
 |  | 
 |                if (exp_b10 < 0) | 
 |                { | 
 |                   *ascii++ = 45; --size; /* '-': PLUS 1 TOTAL 3+precision */ | 
 |                   uexp_b10 = 0U-exp_b10; | 
 |                } | 
 |  | 
 |                else | 
 |                   uexp_b10 = 0U+exp_b10; | 
 |  | 
 |                cdigits = 0; | 
 |  | 
 |                while (uexp_b10 > 0) | 
 |                { | 
 |                   exponent[cdigits++] = (char)(48 + uexp_b10 % 10); | 
 |                   uexp_b10 /= 10; | 
 |                } | 
 |             } | 
 |  | 
 |             /* Need another size check here for the exponent digits, so | 
 |              * this need not be considered above. | 
 |              */ | 
 |             if (size > cdigits) | 
 |             { | 
 |                while (cdigits > 0) *ascii++ = exponent[--cdigits]; | 
 |  | 
 |                *ascii = 0; | 
 |  | 
 |                return; | 
 |             } | 
 |          } | 
 |       } | 
 |       else if (!(fp >= DBL_MIN)) | 
 |       { | 
 |          *ascii++ = 48; /* '0' */ | 
 |          *ascii = 0; | 
 |          return; | 
 |       } | 
 |       else | 
 |       { | 
 |          *ascii++ = 105; /* 'i' */ | 
 |          *ascii++ = 110; /* 'n' */ | 
 |          *ascii++ = 102; /* 'f' */ | 
 |          *ascii = 0; | 
 |          return; | 
 |       } | 
 |    } | 
 |  | 
 |    /* Here on buffer too small. */ | 
 |    png_error(png_ptr, "ASCII conversion buffer too small"); | 
 | } | 
 | #if GCC_STRICT_OVERFLOW | 
 | #pragma GCC diagnostic pop | 
 | #endif /* GCC_STRICT_OVERFLOW */ | 
 |  | 
 | #  endif /* FLOATING_POINT */ | 
 |  | 
 | #  ifdef PNG_FIXED_POINT_SUPPORTED | 
 | /* Function to format a fixed point value in ASCII. | 
 |  */ | 
 | void /* PRIVATE */ | 
 | png_ascii_from_fixed(png_const_structrp png_ptr, png_charp ascii, | 
 |     size_t size, png_fixed_point fp) | 
 | { | 
 |    /* Require space for 10 decimal digits, a decimal point, a minus sign and a | 
 |     * trailing \0, 13 characters: | 
 |     */ | 
 |    if (size > 12) | 
 |    { | 
 |       png_uint_32 num; | 
 |  | 
 |       /* Avoid overflow here on the minimum integer. */ | 
 |       if (fp < 0) | 
 |       { | 
 |          *ascii++ = 45; num = (png_uint_32)(-fp); | 
 |       } | 
 |       else | 
 |          num = (png_uint_32)fp; | 
 |  | 
 |       if (num <= 0x80000000) /* else overflowed */ | 
 |       { | 
 |          unsigned int ndigits = 0, first = 16 /* flag value */; | 
 |          char digits[10]; | 
 |  | 
 |          while (num) | 
 |          { | 
 |             /* Split the low digit off num: */ | 
 |             unsigned int tmp = num/10; | 
 |             num -= tmp*10; | 
 |             digits[ndigits++] = (char)(48 + num); | 
 |             /* Record the first non-zero digit, note that this is a number | 
 |              * starting at 1, it's not actually the array index. | 
 |              */ | 
 |             if (first == 16 && num > 0) | 
 |                first = ndigits; | 
 |             num = tmp; | 
 |          } | 
 |  | 
 |          if (ndigits > 0) | 
 |          { | 
 |             while (ndigits > 5) *ascii++ = digits[--ndigits]; | 
 |             /* The remaining digits are fractional digits, ndigits is '5' or | 
 |              * smaller at this point.  It is certainly not zero.  Check for a | 
 |              * non-zero fractional digit: | 
 |              */ | 
 |             if (first <= 5) | 
 |             { | 
 |                unsigned int i; | 
 |                *ascii++ = 46; /* decimal point */ | 
 |                /* ndigits may be <5 for small numbers, output leading zeros | 
 |                 * then ndigits digits to first: | 
 |                 */ | 
 |                i = 5; | 
 |                while (ndigits < i) | 
 |                { | 
 |                   *ascii++ = 48; --i; | 
 |                } | 
 |                while (ndigits >= first) *ascii++ = digits[--ndigits]; | 
 |                /* Don't output the trailing zeros! */ | 
 |             } | 
 |          } | 
 |          else | 
 |             *ascii++ = 48; | 
 |  | 
 |          /* And null terminate the string: */ | 
 |          *ascii = 0; | 
 |          return; | 
 |       } | 
 |    } | 
 |  | 
 |    /* Here on buffer too small. */ | 
 |    png_error(png_ptr, "ASCII conversion buffer too small"); | 
 | } | 
 | #   endif /* FIXED_POINT */ | 
 | #endif /* SCAL */ | 
 |  | 
 | #if defined(PNG_FLOATING_POINT_SUPPORTED) && \ | 
 |    !defined(PNG_FIXED_POINT_MACRO_SUPPORTED) && \ | 
 |    (defined(PNG_gAMA_SUPPORTED) || defined(PNG_cHRM_SUPPORTED) || \ | 
 |    defined(PNG_sCAL_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) || \ | 
 |    defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)) || \ | 
 |    (defined(PNG_sCAL_SUPPORTED) && \ | 
 |    defined(PNG_FLOATING_ARITHMETIC_SUPPORTED)) | 
 | png_fixed_point | 
 | png_fixed(png_const_structrp png_ptr, double fp, png_const_charp text) | 
 | { | 
 |    double r = floor(100000 * fp + .5); | 
 |  | 
 |    if (r > 2147483647. || r < -2147483648.) | 
 |       png_fixed_error(png_ptr, text); | 
 |  | 
 | #  ifndef PNG_ERROR_TEXT_SUPPORTED | 
 |    PNG_UNUSED(text) | 
 | #  endif | 
 |  | 
 |    return (png_fixed_point)r; | 
 | } | 
 | #endif | 
 |  | 
 | #if defined(PNG_GAMMA_SUPPORTED) || defined(PNG_COLORSPACE_SUPPORTED) ||\ | 
 |     defined(PNG_INCH_CONVERSIONS_SUPPORTED) || defined(PNG_READ_pHYs_SUPPORTED) | 
 | /* muldiv functions */ | 
 | /* This API takes signed arguments and rounds the result to the nearest | 
 |  * integer (or, for a fixed point number - the standard argument - to | 
 |  * the nearest .00001).  Overflow and divide by zero are signalled in | 
 |  * the result, a boolean - true on success, false on overflow. | 
 |  */ | 
 | #if GCC_STRICT_OVERFLOW /* from above */ | 
 | /* It is not obvious which comparison below gets optimized in such a way that | 
 |  * signed overflow would change the result; looking through the code does not | 
 |  * reveal any tests which have the form GCC complains about, so presumably the | 
 |  * optimizer is moving an add or subtract into the 'if' somewhere. | 
 |  */ | 
 | #pragma GCC diagnostic push | 
 | #pragma GCC diagnostic warning "-Wstrict-overflow=2" | 
 | #endif /* GCC_STRICT_OVERFLOW */ | 
 | int | 
 | png_muldiv(png_fixed_point_p res, png_fixed_point a, png_int_32 times, | 
 |     png_int_32 divisor) | 
 | { | 
 |    /* Return a * times / divisor, rounded. */ | 
 |    if (divisor != 0) | 
 |    { | 
 |       if (a == 0 || times == 0) | 
 |       { | 
 |          *res = 0; | 
 |          return 1; | 
 |       } | 
 |       else | 
 |       { | 
 | #ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED | 
 |          double r = a; | 
 |          r *= times; | 
 |          r /= divisor; | 
 |          r = floor(r+.5); | 
 |  | 
 |          /* A png_fixed_point is a 32-bit integer. */ | 
 |          if (r <= 2147483647. && r >= -2147483648.) | 
 |          { | 
 |             *res = (png_fixed_point)r; | 
 |             return 1; | 
 |          } | 
 | #else | 
 |          int negative = 0; | 
 |          png_uint_32 A, T, D; | 
 |          png_uint_32 s16, s32, s00; | 
 |  | 
 |          if (a < 0) | 
 |             negative = 1, A = -a; | 
 |          else | 
 |             A = a; | 
 |  | 
 |          if (times < 0) | 
 |             negative = !negative, T = -times; | 
 |          else | 
 |             T = times; | 
 |  | 
 |          if (divisor < 0) | 
 |             negative = !negative, D = -divisor; | 
 |          else | 
 |             D = divisor; | 
 |  | 
 |          /* Following can't overflow because the arguments only | 
 |           * have 31 bits each, however the result may be 32 bits. | 
 |           */ | 
 |          s16 = (A >> 16) * (T & 0xffff) + | 
 |                            (A & 0xffff) * (T >> 16); | 
 |          /* Can't overflow because the a*times bit is only 30 | 
 |           * bits at most. | 
 |           */ | 
 |          s32 = (A >> 16) * (T >> 16) + (s16 >> 16); | 
 |          s00 = (A & 0xffff) * (T & 0xffff); | 
 |  | 
 |          s16 = (s16 & 0xffff) << 16; | 
 |          s00 += s16; | 
 |  | 
 |          if (s00 < s16) | 
 |             ++s32; /* carry */ | 
 |  | 
 |          if (s32 < D) /* else overflow */ | 
 |          { | 
 |             /* s32.s00 is now the 64-bit product, do a standard | 
 |              * division, we know that s32 < D, so the maximum | 
 |              * required shift is 31. | 
 |              */ | 
 |             int bitshift = 32; | 
 |             png_fixed_point result = 0; /* NOTE: signed */ | 
 |  | 
 |             while (--bitshift >= 0) | 
 |             { | 
 |                png_uint_32 d32, d00; | 
 |  | 
 |                if (bitshift > 0) | 
 |                   d32 = D >> (32-bitshift), d00 = D << bitshift; | 
 |  | 
 |                else | 
 |                   d32 = 0, d00 = D; | 
 |  | 
 |                if (s32 > d32) | 
 |                { | 
 |                   if (s00 < d00) --s32; /* carry */ | 
 |                   s32 -= d32, s00 -= d00, result += 1<<bitshift; | 
 |                } | 
 |  | 
 |                else | 
 |                   if (s32 == d32 && s00 >= d00) | 
 |                      s32 = 0, s00 -= d00, result += 1<<bitshift; | 
 |             } | 
 |  | 
 |             /* Handle the rounding. */ | 
 |             if (s00 >= (D >> 1)) | 
 |                ++result; | 
 |  | 
 |             if (negative != 0) | 
 |                result = -result; | 
 |  | 
 |             /* Check for overflow. */ | 
 |             if ((negative != 0 && result <= 0) || | 
 |                 (negative == 0 && result >= 0)) | 
 |             { | 
 |                *res = result; | 
 |                return 1; | 
 |             } | 
 |          } | 
 | #endif | 
 |       } | 
 |    } | 
 |  | 
 |    return 0; | 
 | } | 
 | #if GCC_STRICT_OVERFLOW | 
 | #pragma GCC diagnostic pop | 
 | #endif /* GCC_STRICT_OVERFLOW */ | 
 | #endif /* READ_GAMMA || INCH_CONVERSIONS */ | 
 |  | 
 | #if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_INCH_CONVERSIONS_SUPPORTED) | 
 | /* The following is for when the caller doesn't much care about the | 
 |  * result. | 
 |  */ | 
 | png_fixed_point | 
 | png_muldiv_warn(png_const_structrp png_ptr, png_fixed_point a, png_int_32 times, | 
 |     png_int_32 divisor) | 
 | { | 
 |    png_fixed_point result; | 
 |  | 
 |    if (png_muldiv(&result, a, times, divisor) != 0) | 
 |       return result; | 
 |  | 
 |    png_warning(png_ptr, "fixed point overflow ignored"); | 
 |    return 0; | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef PNG_GAMMA_SUPPORTED /* more fixed point functions for gamma */ | 
 | /* Calculate a reciprocal, return 0 on div-by-zero or overflow. */ | 
 | png_fixed_point | 
 | png_reciprocal(png_fixed_point a) | 
 | { | 
 | #ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED | 
 |    double r = floor(1E10/a+.5); | 
 |  | 
 |    if (r <= 2147483647. && r >= -2147483648.) | 
 |       return (png_fixed_point)r; | 
 | #else | 
 |    png_fixed_point res; | 
 |  | 
 |    if (png_muldiv(&res, 100000, 100000, a) != 0) | 
 |       return res; | 
 | #endif | 
 |  | 
 |    return 0; /* error/overflow */ | 
 | } | 
 |  | 
 | /* This is the shared test on whether a gamma value is 'significant' - whether | 
 |  * it is worth doing gamma correction. | 
 |  */ | 
 | int /* PRIVATE */ | 
 | png_gamma_significant(png_fixed_point gamma_val) | 
 | { | 
 |    return gamma_val < PNG_FP_1 - PNG_GAMMA_THRESHOLD_FIXED || | 
 |        gamma_val > PNG_FP_1 + PNG_GAMMA_THRESHOLD_FIXED; | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef PNG_READ_GAMMA_SUPPORTED | 
 | #ifdef PNG_16BIT_SUPPORTED | 
 | /* A local convenience routine. */ | 
 | static png_fixed_point | 
 | png_product2(png_fixed_point a, png_fixed_point b) | 
 | { | 
 |    /* The required result is 1/a * 1/b; the following preserves accuracy. */ | 
 | #ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED | 
 |    double r = a * 1E-5; | 
 |    r *= b; | 
 |    r = floor(r+.5); | 
 |  | 
 |    if (r <= 2147483647. && r >= -2147483648.) | 
 |       return (png_fixed_point)r; | 
 | #else | 
 |    png_fixed_point res; | 
 |  | 
 |    if (png_muldiv(&res, a, b, 100000) != 0) | 
 |       return res; | 
 | #endif | 
 |  | 
 |    return 0; /* overflow */ | 
 | } | 
 | #endif /* 16BIT */ | 
 |  | 
 | /* The inverse of the above. */ | 
 | png_fixed_point | 
 | png_reciprocal2(png_fixed_point a, png_fixed_point b) | 
 | { | 
 |    /* The required result is 1/a * 1/b; the following preserves accuracy. */ | 
 | #ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED | 
 |    if (a != 0 && b != 0) | 
 |    { | 
 |       double r = 1E15/a; | 
 |       r /= b; | 
 |       r = floor(r+.5); | 
 |  | 
 |       if (r <= 2147483647. && r >= -2147483648.) | 
 |          return (png_fixed_point)r; | 
 |    } | 
 | #else | 
 |    /* This may overflow because the range of png_fixed_point isn't symmetric, | 
 |     * but this API is only used for the product of file and screen gamma so it | 
 |     * doesn't matter that the smallest number it can produce is 1/21474, not | 
 |     * 1/100000 | 
 |     */ | 
 |    png_fixed_point res = png_product2(a, b); | 
 |  | 
 |    if (res != 0) | 
 |       return png_reciprocal(res); | 
 | #endif | 
 |  | 
 |    return 0; /* overflow */ | 
 | } | 
 | #endif /* READ_GAMMA */ | 
 |  | 
 | #ifdef PNG_READ_GAMMA_SUPPORTED /* gamma table code */ | 
 | #ifndef PNG_FLOATING_ARITHMETIC_SUPPORTED | 
 | /* Fixed point gamma. | 
 |  * | 
 |  * The code to calculate the tables used below can be found in the shell script | 
 |  * contrib/tools/intgamma.sh | 
 |  * | 
 |  * To calculate gamma this code implements fast log() and exp() calls using only | 
 |  * fixed point arithmetic.  This code has sufficient precision for either 8-bit | 
 |  * or 16-bit sample values. | 
 |  * | 
 |  * The tables used here were calculated using simple 'bc' programs, but C double | 
 |  * precision floating point arithmetic would work fine. | 
 |  * | 
 |  * 8-bit log table | 
 |  *   This is a table of -log(value/255)/log(2) for 'value' in the range 128 to | 
 |  *   255, so it's the base 2 logarithm of a normalized 8-bit floating point | 
 |  *   mantissa.  The numbers are 32-bit fractions. | 
 |  */ | 
 | static const png_uint_32 | 
 | png_8bit_l2[128] = | 
 | { | 
 |    4270715492U, 4222494797U, 4174646467U, 4127164793U, 4080044201U, 4033279239U, | 
 |    3986864580U, 3940795015U, 3895065449U, 3849670902U, 3804606499U, 3759867474U, | 
 |    3715449162U, 3671346997U, 3627556511U, 3584073329U, 3540893168U, 3498011834U, | 
 |    3455425220U, 3413129301U, 3371120137U, 3329393864U, 3287946700U, 3246774933U, | 
 |    3205874930U, 3165243125U, 3124876025U, 3084770202U, 3044922296U, 3005329011U, | 
 |    2965987113U, 2926893432U, 2888044853U, 2849438323U, 2811070844U, 2772939474U, | 
 |    2735041326U, 2697373562U, 2659933400U, 2622718104U, 2585724991U, 2548951424U, | 
 |    2512394810U, 2476052606U, 2439922311U, 2404001468U, 2368287663U, 2332778523U, | 
 |    2297471715U, 2262364947U, 2227455964U, 2192742551U, 2158222529U, 2123893754U, | 
 |    2089754119U, 2055801552U, 2022034013U, 1988449497U, 1955046031U, 1921821672U, | 
 |    1888774511U, 1855902668U, 1823204291U, 1790677560U, 1758320682U, 1726131893U, | 
 |    1694109454U, 1662251657U, 1630556815U, 1599023271U, 1567649391U, 1536433567U, | 
 |    1505374214U, 1474469770U, 1443718700U, 1413119487U, 1382670639U, 1352370686U, | 
 |    1322218179U, 1292211689U, 1262349810U, 1232631153U, 1203054352U, 1173618059U, | 
 |    1144320946U, 1115161701U, 1086139034U, 1057251672U, 1028498358U, 999877854U, | 
 |    971388940U, 943030410U, 914801076U, 886699767U, 858725327U, 830876614U, | 
 |    803152505U, 775551890U, 748073672U, 720716771U, 693480120U, 666362667U, | 
 |    639363374U, 612481215U, 585715177U, 559064263U, 532527486U, 506103872U, | 
 |    479792461U, 453592303U, 427502463U, 401522014U, 375650043U, 349885648U, | 
 |    324227938U, 298676034U, 273229066U, 247886176U, 222646516U, 197509248U, | 
 |    172473545U, 147538590U, 122703574U, 97967701U, 73330182U, 48790236U, | 
 |    24347096U, 0U | 
 |  | 
 | #if 0 | 
 |    /* The following are the values for 16-bit tables - these work fine for the | 
 |     * 8-bit conversions but produce very slightly larger errors in the 16-bit | 
 |     * log (about 1.2 as opposed to 0.7 absolute error in the final value).  To | 
 |     * use these all the shifts below must be adjusted appropriately. | 
 |     */ | 
 |    65166, 64430, 63700, 62976, 62257, 61543, 60835, 60132, 59434, 58741, 58054, | 
 |    57371, 56693, 56020, 55352, 54689, 54030, 53375, 52726, 52080, 51439, 50803, | 
 |    50170, 49542, 48918, 48298, 47682, 47070, 46462, 45858, 45257, 44661, 44068, | 
 |    43479, 42894, 42312, 41733, 41159, 40587, 40020, 39455, 38894, 38336, 37782, | 
 |    37230, 36682, 36137, 35595, 35057, 34521, 33988, 33459, 32932, 32408, 31887, | 
 |    31369, 30854, 30341, 29832, 29325, 28820, 28319, 27820, 27324, 26830, 26339, | 
 |    25850, 25364, 24880, 24399, 23920, 23444, 22970, 22499, 22029, 21562, 21098, | 
 |    20636, 20175, 19718, 19262, 18808, 18357, 17908, 17461, 17016, 16573, 16132, | 
 |    15694, 15257, 14822, 14390, 13959, 13530, 13103, 12678, 12255, 11834, 11415, | 
 |    10997, 10582, 10168, 9756, 9346, 8937, 8531, 8126, 7723, 7321, 6921, 6523, | 
 |    6127, 5732, 5339, 4947, 4557, 4169, 3782, 3397, 3014, 2632, 2251, 1872, 1495, | 
 |    1119, 744, 372 | 
 | #endif | 
 | }; | 
 |  | 
 | static png_int_32 | 
 | png_log8bit(unsigned int x) | 
 | { | 
 |    unsigned int lg2 = 0; | 
 |    /* Each time 'x' is multiplied by 2, 1 must be subtracted off the final log, | 
 |     * because the log is actually negate that means adding 1.  The final | 
 |     * returned value thus has the range 0 (for 255 input) to 7.994 (for 1 | 
 |     * input), return -1 for the overflow (log 0) case, - so the result is | 
 |     * always at most 19 bits. | 
 |     */ | 
 |    if ((x &= 0xff) == 0) | 
 |       return -1; | 
 |  | 
 |    if ((x & 0xf0) == 0) | 
 |       lg2  = 4, x <<= 4; | 
 |  | 
 |    if ((x & 0xc0) == 0) | 
 |       lg2 += 2, x <<= 2; | 
 |  | 
 |    if ((x & 0x80) == 0) | 
 |       lg2 += 1, x <<= 1; | 
 |  | 
 |    /* result is at most 19 bits, so this cast is safe: */ | 
 |    return (png_int_32)((lg2 << 16) + ((png_8bit_l2[x-128]+32768)>>16)); | 
 | } | 
 |  | 
 | /* The above gives exact (to 16 binary places) log2 values for 8-bit images, | 
 |  * for 16-bit images we use the most significant 8 bits of the 16-bit value to | 
 |  * get an approximation then multiply the approximation by a correction factor | 
 |  * determined by the remaining up to 8 bits.  This requires an additional step | 
 |  * in the 16-bit case. | 
 |  * | 
 |  * We want log2(value/65535), we have log2(v'/255), where: | 
 |  * | 
 |  *    value = v' * 256 + v'' | 
 |  *          = v' * f | 
 |  * | 
 |  * So f is value/v', which is equal to (256+v''/v') since v' is in the range 128 | 
 |  * to 255 and v'' is in the range 0 to 255 f will be in the range 256 to less | 
 |  * than 258.  The final factor also needs to correct for the fact that our 8-bit | 
 |  * value is scaled by 255, whereas the 16-bit values must be scaled by 65535. | 
 |  * | 
 |  * This gives a final formula using a calculated value 'x' which is value/v' and | 
 |  * scaling by 65536 to match the above table: | 
 |  * | 
 |  *   log2(x/257) * 65536 | 
 |  * | 
 |  * Since these numbers are so close to '1' we can use simple linear | 
 |  * interpolation between the two end values 256/257 (result -368.61) and 258/257 | 
 |  * (result 367.179).  The values used below are scaled by a further 64 to give | 
 |  * 16-bit precision in the interpolation: | 
 |  * | 
 |  * Start (256): -23591 | 
 |  * Zero  (257):      0 | 
 |  * End   (258):  23499 | 
 |  */ | 
 | #ifdef PNG_16BIT_SUPPORTED | 
 | static png_int_32 | 
 | png_log16bit(png_uint_32 x) | 
 | { | 
 |    unsigned int lg2 = 0; | 
 |  | 
 |    /* As above, but now the input has 16 bits. */ | 
 |    if ((x &= 0xffff) == 0) | 
 |       return -1; | 
 |  | 
 |    if ((x & 0xff00) == 0) | 
 |       lg2  = 8, x <<= 8; | 
 |  | 
 |    if ((x & 0xf000) == 0) | 
 |       lg2 += 4, x <<= 4; | 
 |  | 
 |    if ((x & 0xc000) == 0) | 
 |       lg2 += 2, x <<= 2; | 
 |  | 
 |    if ((x & 0x8000) == 0) | 
 |       lg2 += 1, x <<= 1; | 
 |  | 
 |    /* Calculate the base logarithm from the top 8 bits as a 28-bit fractional | 
 |     * value. | 
 |     */ | 
 |    lg2 <<= 28; | 
 |    lg2 += (png_8bit_l2[(x>>8)-128]+8) >> 4; | 
 |  | 
 |    /* Now we need to interpolate the factor, this requires a division by the top | 
 |     * 8 bits.  Do this with maximum precision. | 
 |     */ | 
 |    x = ((x << 16) + (x >> 9)) / (x >> 8); | 
 |  | 
 |    /* Since we divided by the top 8 bits of 'x' there will be a '1' at 1<<24, | 
 |     * the value at 1<<16 (ignoring this) will be 0 or 1; this gives us exactly | 
 |     * 16 bits to interpolate to get the low bits of the result.  Round the | 
 |     * answer.  Note that the end point values are scaled by 64 to retain overall | 
 |     * precision and that 'lg2' is current scaled by an extra 12 bits, so adjust | 
 |     * the overall scaling by 6-12.  Round at every step. | 
 |     */ | 
 |    x -= 1U << 24; | 
 |  | 
 |    if (x <= 65536U) /* <= '257' */ | 
 |       lg2 += ((23591U * (65536U-x)) + (1U << (16+6-12-1))) >> (16+6-12); | 
 |  | 
 |    else | 
 |       lg2 -= ((23499U * (x-65536U)) + (1U << (16+6-12-1))) >> (16+6-12); | 
 |  | 
 |    /* Safe, because the result can't have more than 20 bits: */ | 
 |    return (png_int_32)((lg2 + 2048) >> 12); | 
 | } | 
 | #endif /* 16BIT */ | 
 |  | 
 | /* The 'exp()' case must invert the above, taking a 20-bit fixed point | 
 |  * logarithmic value and returning a 16 or 8-bit number as appropriate.  In | 
 |  * each case only the low 16 bits are relevant - the fraction - since the | 
 |  * integer bits (the top 4) simply determine a shift. | 
 |  * | 
 |  * The worst case is the 16-bit distinction between 65535 and 65534. This | 
 |  * requires perhaps spurious accuracy in the decoding of the logarithm to | 
 |  * distinguish log2(65535/65534.5) - 10^-5 or 17 bits.  There is little chance | 
 |  * of getting this accuracy in practice. | 
 |  * | 
 |  * To deal with this the following exp() function works out the exponent of the | 
 |  * fractional part of the logarithm by using an accurate 32-bit value from the | 
 |  * top four fractional bits then multiplying in the remaining bits. | 
 |  */ | 
 | static const png_uint_32 | 
 | png_32bit_exp[16] = | 
 | { | 
 |    /* NOTE: the first entry is deliberately set to the maximum 32-bit value. */ | 
 |    4294967295U, 4112874773U, 3938502376U, 3771522796U, 3611622603U, 3458501653U, | 
 |    3311872529U, 3171459999U, 3037000500U, 2908241642U, 2784941738U, 2666869345U, | 
 |    2553802834U, 2445529972U, 2341847524U, 2242560872U | 
 | }; | 
 |  | 
 | /* Adjustment table; provided to explain the numbers in the code below. */ | 
 | #if 0 | 
 | for (i=11;i>=0;--i){ print i, " ", (1 - e(-(2^i)/65536*l(2))) * 2^(32-i), "\n"} | 
 |    11 44937.64284865548751208448 | 
 |    10 45180.98734845585101160448 | 
 |     9 45303.31936980687359311872 | 
 |     8 45364.65110595323018870784 | 
 |     7 45395.35850361789624614912 | 
 |     6 45410.72259715102037508096 | 
 |     5 45418.40724413220722311168 | 
 |     4 45422.25021786898173001728 | 
 |     3 45424.17186732298419044352 | 
 |     2 45425.13273269940811464704 | 
 |     1 45425.61317555035558641664 | 
 |     0 45425.85339951654943850496 | 
 | #endif | 
 |  | 
 | static png_uint_32 | 
 | png_exp(png_fixed_point x) | 
 | { | 
 |    if (x > 0 && x <= 0xfffff) /* Else overflow or zero (underflow) */ | 
 |    { | 
 |       /* Obtain a 4-bit approximation */ | 
 |       png_uint_32 e = png_32bit_exp[(x >> 12) & 0x0f]; | 
 |  | 
 |       /* Incorporate the low 12 bits - these decrease the returned value by | 
 |        * multiplying by a number less than 1 if the bit is set.  The multiplier | 
 |        * is determined by the above table and the shift. Notice that the values | 
 |        * converge on 45426 and this is used to allow linear interpolation of the | 
 |        * low bits. | 
 |        */ | 
 |       if (x & 0x800) | 
 |          e -= (((e >> 16) * 44938U) +  16U) >> 5; | 
 |  | 
 |       if (x & 0x400) | 
 |          e -= (((e >> 16) * 45181U) +  32U) >> 6; | 
 |  | 
 |       if (x & 0x200) | 
 |          e -= (((e >> 16) * 45303U) +  64U) >> 7; | 
 |  | 
 |       if (x & 0x100) | 
 |          e -= (((e >> 16) * 45365U) + 128U) >> 8; | 
 |  | 
 |       if (x & 0x080) | 
 |          e -= (((e >> 16) * 45395U) + 256U) >> 9; | 
 |  | 
 |       if (x & 0x040) | 
 |          e -= (((e >> 16) * 45410U) + 512U) >> 10; | 
 |  | 
 |       /* And handle the low 6 bits in a single block. */ | 
 |       e -= (((e >> 16) * 355U * (x & 0x3fU)) + 256U) >> 9; | 
 |  | 
 |       /* Handle the upper bits of x. */ | 
 |       e >>= x >> 16; | 
 |       return e; | 
 |    } | 
 |  | 
 |    /* Check for overflow */ | 
 |    if (x <= 0) | 
 |       return png_32bit_exp[0]; | 
 |  | 
 |    /* Else underflow */ | 
 |    return 0; | 
 | } | 
 |  | 
 | static png_byte | 
 | png_exp8bit(png_fixed_point lg2) | 
 | { | 
 |    /* Get a 32-bit value: */ | 
 |    png_uint_32 x = png_exp(lg2); | 
 |  | 
 |    /* Convert the 32-bit value to 0..255 by multiplying by 256-1. Note that the | 
 |     * second, rounding, step can't overflow because of the first, subtraction, | 
 |     * step. | 
 |     */ | 
 |    x -= x >> 8; | 
 |    return (png_byte)(((x + 0x7fffffU) >> 24) & 0xff); | 
 | } | 
 |  | 
 | #ifdef PNG_16BIT_SUPPORTED | 
 | static png_uint_16 | 
 | png_exp16bit(png_fixed_point lg2) | 
 | { | 
 |    /* Get a 32-bit value: */ | 
 |    png_uint_32 x = png_exp(lg2); | 
 |  | 
 |    /* Convert the 32-bit value to 0..65535 by multiplying by 65536-1: */ | 
 |    x -= x >> 16; | 
 |    return (png_uint_16)((x + 32767U) >> 16); | 
 | } | 
 | #endif /* 16BIT */ | 
 | #endif /* FLOATING_ARITHMETIC */ | 
 |  | 
 | png_byte | 
 | png_gamma_8bit_correct(unsigned int value, png_fixed_point gamma_val) | 
 | { | 
 |    if (value > 0 && value < 255) | 
 |    { | 
 | #     ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED | 
 |          /* 'value' is unsigned, ANSI-C90 requires the compiler to correctly | 
 |           * convert this to a floating point value.  This includes values that | 
 |           * would overflow if 'value' were to be converted to 'int'. | 
 |           * | 
 |           * Apparently GCC, however, does an intermediate conversion to (int) | 
 |           * on some (ARM) but not all (x86) platforms, possibly because of | 
 |           * hardware FP limitations.  (E.g. if the hardware conversion always | 
 |           * assumes the integer register contains a signed value.)  This results | 
 |           * in ANSI-C undefined behavior for large values. | 
 |           * | 
 |           * Other implementations on the same machine might actually be ANSI-C90 | 
 |           * conformant and therefore compile spurious extra code for the large | 
 |           * values. | 
 |           * | 
 |           * We can be reasonably sure that an unsigned to float conversion | 
 |           * won't be faster than an int to float one.  Therefore this code | 
 |           * assumes responsibility for the undefined behavior, which it knows | 
 |           * can't happen because of the check above. | 
 |           * | 
 |           * Note the argument to this routine is an (unsigned int) because, on | 
 |           * 16-bit platforms, it is assigned a value which might be out of | 
 |           * range for an (int); that would result in undefined behavior in the | 
 |           * caller if the *argument* ('value') were to be declared (int). | 
 |           */ | 
 |          double r = floor(255*pow((int)/*SAFE*/value/255.,gamma_val*.00001)+.5); | 
 |          return (png_byte)r; | 
 | #     else | 
 |          png_int_32 lg2 = png_log8bit(value); | 
 |          png_fixed_point res; | 
 |  | 
 |          if (png_muldiv(&res, gamma_val, lg2, PNG_FP_1) != 0) | 
 |             return png_exp8bit(res); | 
 |  | 
 |          /* Overflow. */ | 
 |          value = 0; | 
 | #     endif | 
 |    } | 
 |  | 
 |    return (png_byte)(value & 0xff); | 
 | } | 
 |  | 
 | #ifdef PNG_16BIT_SUPPORTED | 
 | png_uint_16 | 
 | png_gamma_16bit_correct(unsigned int value, png_fixed_point gamma_val) | 
 | { | 
 |    if (value > 0 && value < 65535) | 
 |    { | 
 | # ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED | 
 |       /* The same (unsigned int)->(double) constraints apply here as above, | 
 |        * however in this case the (unsigned int) to (int) conversion can | 
 |        * overflow on an ANSI-C90 compliant system so the cast needs to ensure | 
 |        * that this is not possible. | 
 |        */ | 
 |       double r = floor(65535*pow((png_int_32)value/65535., | 
 |           gamma_val*.00001)+.5); | 
 |       return (png_uint_16)r; | 
 | # else | 
 |       png_int_32 lg2 = png_log16bit(value); | 
 |       png_fixed_point res; | 
 |  | 
 |       if (png_muldiv(&res, gamma_val, lg2, PNG_FP_1) != 0) | 
 |          return png_exp16bit(res); | 
 |  | 
 |       /* Overflow. */ | 
 |       value = 0; | 
 | # endif | 
 |    } | 
 |  | 
 |    return (png_uint_16)value; | 
 | } | 
 | #endif /* 16BIT */ | 
 |  | 
 | /* This does the right thing based on the bit_depth field of the | 
 |  * png_struct, interpreting values as 8-bit or 16-bit.  While the result | 
 |  * is nominally a 16-bit value if bit depth is 8 then the result is | 
 |  * 8-bit (as are the arguments.) | 
 |  */ | 
 | png_uint_16 /* PRIVATE */ | 
 | png_gamma_correct(png_structrp png_ptr, unsigned int value, | 
 |     png_fixed_point gamma_val) | 
 | { | 
 |    if (png_ptr->bit_depth == 8) | 
 |       return png_gamma_8bit_correct(value, gamma_val); | 
 |  | 
 | #ifdef PNG_16BIT_SUPPORTED | 
 |    else | 
 |       return png_gamma_16bit_correct(value, gamma_val); | 
 | #else | 
 |       /* should not reach this */ | 
 |       return 0; | 
 | #endif /* 16BIT */ | 
 | } | 
 |  | 
 | #ifdef PNG_16BIT_SUPPORTED | 
 | /* Internal function to build a single 16-bit table - the table consists of | 
 |  * 'num' 256 entry subtables, where 'num' is determined by 'shift' - the amount | 
 |  * to shift the input values right (or 16-number_of_signifiant_bits). | 
 |  * | 
 |  * The caller is responsible for ensuring that the table gets cleaned up on | 
 |  * png_error (i.e. if one of the mallocs below fails) - i.e. the *table argument | 
 |  * should be somewhere that will be cleaned. | 
 |  */ | 
 | static void | 
 | png_build_16bit_table(png_structrp png_ptr, png_uint_16pp *ptable, | 
 |     unsigned int shift, png_fixed_point gamma_val) | 
 | { | 
 |    /* Various values derived from 'shift': */ | 
 |    unsigned int num = 1U << (8U - shift); | 
 | #ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED | 
 |    /* CSE the division and work round wacky GCC warnings (see the comments | 
 |     * in png_gamma_8bit_correct for where these come from.) | 
 |     */ | 
 |    double fmax = 1.0 / (((png_int_32)1 << (16U - shift)) - 1); | 
 | #endif | 
 |    unsigned int max = (1U << (16U - shift)) - 1U; | 
 |    unsigned int max_by_2 = 1U << (15U - shift); | 
 |    unsigned int i; | 
 |  | 
 |    png_uint_16pp table = *ptable = | 
 |        (png_uint_16pp)png_calloc(png_ptr, num * (sizeof (png_uint_16p))); | 
 |  | 
 |    for (i = 0; i < num; i++) | 
 |    { | 
 |       png_uint_16p sub_table = table[i] = | 
 |           (png_uint_16p)png_malloc(png_ptr, 256 * (sizeof (png_uint_16))); | 
 |  | 
 |       /* The 'threshold' test is repeated here because it can arise for one of | 
 |        * the 16-bit tables even if the others don't hit it. | 
 |        */ | 
 |       if (png_gamma_significant(gamma_val) != 0) | 
 |       { | 
 |          /* The old code would overflow at the end and this would cause the | 
 |           * 'pow' function to return a result >1, resulting in an | 
 |           * arithmetic error.  This code follows the spec exactly; ig is | 
 |           * the recovered input sample, it always has 8-16 bits. | 
 |           * | 
 |           * We want input * 65535/max, rounded, the arithmetic fits in 32 | 
 |           * bits (unsigned) so long as max <= 32767. | 
 |           */ | 
 |          unsigned int j; | 
 |          for (j = 0; j < 256; j++) | 
 |          { | 
 |             png_uint_32 ig = (j << (8-shift)) + i; | 
 | #           ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED | 
 |                /* Inline the 'max' scaling operation: */ | 
 |                /* See png_gamma_8bit_correct for why the cast to (int) is | 
 |                 * required here. | 
 |                 */ | 
 |                double d = floor(65535.*pow(ig*fmax, gamma_val*.00001)+.5); | 
 |                sub_table[j] = (png_uint_16)d; | 
 | #           else | 
 |                if (shift != 0) | 
 |                   ig = (ig * 65535U + max_by_2)/max; | 
 |  | 
 |                sub_table[j] = png_gamma_16bit_correct(ig, gamma_val); | 
 | #           endif | 
 |          } | 
 |       } | 
 |       else | 
 |       { | 
 |          /* We must still build a table, but do it the fast way. */ | 
 |          unsigned int j; | 
 |  | 
 |          for (j = 0; j < 256; j++) | 
 |          { | 
 |             png_uint_32 ig = (j << (8-shift)) + i; | 
 |  | 
 |             if (shift != 0) | 
 |                ig = (ig * 65535U + max_by_2)/max; | 
 |  | 
 |             sub_table[j] = (png_uint_16)ig; | 
 |          } | 
 |       } | 
 |    } | 
 | } | 
 |  | 
 | /* NOTE: this function expects the *inverse* of the overall gamma transformation | 
 |  * required. | 
 |  */ | 
 | static void | 
 | png_build_16to8_table(png_structrp png_ptr, png_uint_16pp *ptable, | 
 |     unsigned int shift, png_fixed_point gamma_val) | 
 | { | 
 |    unsigned int num = 1U << (8U - shift); | 
 |    unsigned int max = (1U << (16U - shift))-1U; | 
 |    unsigned int i; | 
 |    png_uint_32 last; | 
 |  | 
 |    png_uint_16pp table = *ptable = | 
 |        (png_uint_16pp)png_calloc(png_ptr, num * (sizeof (png_uint_16p))); | 
 |  | 
 |    /* 'num' is the number of tables and also the number of low bits of low | 
 |     * bits of the input 16-bit value used to select a table.  Each table is | 
 |     * itself indexed by the high 8 bits of the value. | 
 |     */ | 
 |    for (i = 0; i < num; i++) | 
 |       table[i] = (png_uint_16p)png_malloc(png_ptr, | 
 |           256 * (sizeof (png_uint_16))); | 
 |  | 
 |    /* 'gamma_val' is set to the reciprocal of the value calculated above, so | 
 |     * pow(out,g) is an *input* value.  'last' is the last input value set. | 
 |     * | 
 |     * In the loop 'i' is used to find output values.  Since the output is | 
 |     * 8-bit there are only 256 possible values.  The tables are set up to | 
 |     * select the closest possible output value for each input by finding | 
 |     * the input value at the boundary between each pair of output values | 
 |     * and filling the table up to that boundary with the lower output | 
 |     * value. | 
 |     * | 
 |     * The boundary values are 0.5,1.5..253.5,254.5.  Since these are 9-bit | 
 |     * values the code below uses a 16-bit value in i; the values start at | 
 |     * 128.5 (for 0.5) and step by 257, for a total of 254 values (the last | 
 |     * entries are filled with 255).  Start i at 128 and fill all 'last' | 
 |     * table entries <= 'max' | 
 |     */ | 
 |    last = 0; | 
 |    for (i = 0; i < 255; ++i) /* 8-bit output value */ | 
 |    { | 
 |       /* Find the corresponding maximum input value */ | 
 |       png_uint_16 out = (png_uint_16)(i * 257U); /* 16-bit output value */ | 
 |  | 
 |       /* Find the boundary value in 16 bits: */ | 
 |       png_uint_32 bound = png_gamma_16bit_correct(out+128U, gamma_val); | 
 |  | 
 |       /* Adjust (round) to (16-shift) bits: */ | 
 |       bound = (bound * max + 32768U)/65535U + 1U; | 
 |  | 
 |       while (last < bound) | 
 |       { | 
 |          table[last & (0xffU >> shift)][last >> (8U - shift)] = out; | 
 |          last++; | 
 |       } | 
 |    } | 
 |  | 
 |    /* And fill in the final entries. */ | 
 |    while (last < (num << 8)) | 
 |    { | 
 |       table[last & (0xff >> shift)][last >> (8U - shift)] = 65535U; | 
 |       last++; | 
 |    } | 
 | } | 
 | #endif /* 16BIT */ | 
 |  | 
 | /* Build a single 8-bit table: same as the 16-bit case but much simpler (and | 
 |  * typically much faster).  Note that libpng currently does no sBIT processing | 
 |  * (apparently contrary to the spec) so a 256-entry table is always generated. | 
 |  */ | 
 | static void | 
 | png_build_8bit_table(png_structrp png_ptr, png_bytepp ptable, | 
 |     png_fixed_point gamma_val) | 
 | { | 
 |    unsigned int i; | 
 |    png_bytep table = *ptable = (png_bytep)png_malloc(png_ptr, 256); | 
 |  | 
 |    if (png_gamma_significant(gamma_val) != 0) | 
 |       for (i=0; i<256; i++) | 
 |          table[i] = png_gamma_8bit_correct(i, gamma_val); | 
 |  | 
 |    else | 
 |       for (i=0; i<256; ++i) | 
 |          table[i] = (png_byte)(i & 0xff); | 
 | } | 
 |  | 
 | /* Used from png_read_destroy and below to release the memory used by the gamma | 
 |  * tables. | 
 |  */ | 
 | void /* PRIVATE */ | 
 | png_destroy_gamma_table(png_structrp png_ptr) | 
 | { | 
 |    png_free(png_ptr, png_ptr->gamma_table); | 
 |    png_ptr->gamma_table = NULL; | 
 |  | 
 | #ifdef PNG_16BIT_SUPPORTED | 
 |    if (png_ptr->gamma_16_table != NULL) | 
 |    { | 
 |       int i; | 
 |       int istop = (1 << (8 - png_ptr->gamma_shift)); | 
 |       for (i = 0; i < istop; i++) | 
 |       { | 
 |          png_free(png_ptr, png_ptr->gamma_16_table[i]); | 
 |       } | 
 |    png_free(png_ptr, png_ptr->gamma_16_table); | 
 |    png_ptr->gamma_16_table = NULL; | 
 |    } | 
 | #endif /* 16BIT */ | 
 |  | 
 | #if defined(PNG_READ_BACKGROUND_SUPPORTED) || \ | 
 |    defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \ | 
 |    defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) | 
 |    png_free(png_ptr, png_ptr->gamma_from_1); | 
 |    png_ptr->gamma_from_1 = NULL; | 
 |    png_free(png_ptr, png_ptr->gamma_to_1); | 
 |    png_ptr->gamma_to_1 = NULL; | 
 |  | 
 | #ifdef PNG_16BIT_SUPPORTED | 
 |    if (png_ptr->gamma_16_from_1 != NULL) | 
 |    { | 
 |       int i; | 
 |       int istop = (1 << (8 - png_ptr->gamma_shift)); | 
 |       for (i = 0; i < istop; i++) | 
 |       { | 
 |          png_free(png_ptr, png_ptr->gamma_16_from_1[i]); | 
 |       } | 
 |    png_free(png_ptr, png_ptr->gamma_16_from_1); | 
 |    png_ptr->gamma_16_from_1 = NULL; | 
 |    } | 
 |    if (png_ptr->gamma_16_to_1 != NULL) | 
 |    { | 
 |       int i; | 
 |       int istop = (1 << (8 - png_ptr->gamma_shift)); | 
 |       for (i = 0; i < istop; i++) | 
 |       { | 
 |          png_free(png_ptr, png_ptr->gamma_16_to_1[i]); | 
 |       } | 
 |    png_free(png_ptr, png_ptr->gamma_16_to_1); | 
 |    png_ptr->gamma_16_to_1 = NULL; | 
 |    } | 
 | #endif /* 16BIT */ | 
 | #endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */ | 
 | } | 
 |  | 
 | /* We build the 8- or 16-bit gamma tables here.  Note that for 16-bit | 
 |  * tables, we don't make a full table if we are reducing to 8-bit in | 
 |  * the future.  Note also how the gamma_16 tables are segmented so that | 
 |  * we don't need to allocate > 64K chunks for a full 16-bit table. | 
 |  */ | 
 | void /* PRIVATE */ | 
 | png_build_gamma_table(png_structrp png_ptr, int bit_depth) | 
 | { | 
 |    png_debug(1, "in png_build_gamma_table"); | 
 |  | 
 |    /* Remove any existing table; this copes with multiple calls to | 
 |     * png_read_update_info. The warning is because building the gamma tables | 
 |     * multiple times is a performance hit - it's harmless but the ability to | 
 |     * call png_read_update_info() multiple times is new in 1.5.6 so it seems | 
 |     * sensible to warn if the app introduces such a hit. | 
 |     */ | 
 |    if (png_ptr->gamma_table != NULL || png_ptr->gamma_16_table != NULL) | 
 |    { | 
 |       png_warning(png_ptr, "gamma table being rebuilt"); | 
 |       png_destroy_gamma_table(png_ptr); | 
 |    } | 
 |  | 
 |    if (bit_depth <= 8) | 
 |    { | 
 |       png_build_8bit_table(png_ptr, &png_ptr->gamma_table, | 
 |           png_ptr->screen_gamma > 0 ? | 
 |           png_reciprocal2(png_ptr->colorspace.gamma, | 
 |           png_ptr->screen_gamma) : PNG_FP_1); | 
 |  | 
 | #if defined(PNG_READ_BACKGROUND_SUPPORTED) || \ | 
 |    defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \ | 
 |    defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) | 
 |       if ((png_ptr->transformations & (PNG_COMPOSE | PNG_RGB_TO_GRAY)) != 0) | 
 |       { | 
 |          png_build_8bit_table(png_ptr, &png_ptr->gamma_to_1, | 
 |              png_reciprocal(png_ptr->colorspace.gamma)); | 
 |  | 
 |          png_build_8bit_table(png_ptr, &png_ptr->gamma_from_1, | 
 |              png_ptr->screen_gamma > 0 ? | 
 |              png_reciprocal(png_ptr->screen_gamma) : | 
 |              png_ptr->colorspace.gamma/* Probably doing rgb_to_gray */); | 
 |       } | 
 | #endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */ | 
 |    } | 
 | #ifdef PNG_16BIT_SUPPORTED | 
 |    else | 
 |    { | 
 |       png_byte shift, sig_bit; | 
 |  | 
 |       if ((png_ptr->color_type & PNG_COLOR_MASK_COLOR) != 0) | 
 |       { | 
 |          sig_bit = png_ptr->sig_bit.red; | 
 |  | 
 |          if (png_ptr->sig_bit.green > sig_bit) | 
 |             sig_bit = png_ptr->sig_bit.green; | 
 |  | 
 |          if (png_ptr->sig_bit.blue > sig_bit) | 
 |             sig_bit = png_ptr->sig_bit.blue; | 
 |       } | 
 |       else | 
 |          sig_bit = png_ptr->sig_bit.gray; | 
 |  | 
 |       /* 16-bit gamma code uses this equation: | 
 |        * | 
 |        *   ov = table[(iv & 0xff) >> gamma_shift][iv >> 8] | 
 |        * | 
 |        * Where 'iv' is the input color value and 'ov' is the output value - | 
 |        * pow(iv, gamma). | 
 |        * | 
 |        * Thus the gamma table consists of up to 256 256-entry tables.  The table | 
 |        * is selected by the (8-gamma_shift) most significant of the low 8 bits | 
 |        * of the color value then indexed by the upper 8 bits: | 
 |        * | 
 |        *   table[low bits][high 8 bits] | 
 |        * | 
 |        * So the table 'n' corresponds to all those 'iv' of: | 
 |        * | 
 |        *   <all high 8-bit values><n << gamma_shift>..<(n+1 << gamma_shift)-1> | 
 |        * | 
 |        */ | 
 |       if (sig_bit > 0 && sig_bit < 16U) | 
 |          /* shift == insignificant bits */ | 
 |          shift = (png_byte)((16U - sig_bit) & 0xff); | 
 |  | 
 |       else | 
 |          shift = 0; /* keep all 16 bits */ | 
 |  | 
 |       if ((png_ptr->transformations & (PNG_16_TO_8 | PNG_SCALE_16_TO_8)) != 0) | 
 |       { | 
 |          /* PNG_MAX_GAMMA_8 is the number of bits to keep - effectively | 
 |           * the significant bits in the *input* when the output will | 
 |           * eventually be 8 bits.  By default it is 11. | 
 |           */ | 
 |          if (shift < (16U - PNG_MAX_GAMMA_8)) | 
 |             shift = (16U - PNG_MAX_GAMMA_8); | 
 |       } | 
 |  | 
 |       if (shift > 8U) | 
 |          shift = 8U; /* Guarantees at least one table! */ | 
 |  | 
 |       png_ptr->gamma_shift = shift; | 
 |  | 
 |       /* NOTE: prior to 1.5.4 this test used to include PNG_BACKGROUND (now | 
 |        * PNG_COMPOSE).  This effectively smashed the background calculation for | 
 |        * 16-bit output because the 8-bit table assumes the result will be | 
 |        * reduced to 8 bits. | 
 |        */ | 
 |       if ((png_ptr->transformations & (PNG_16_TO_8 | PNG_SCALE_16_TO_8)) != 0) | 
 |           png_build_16to8_table(png_ptr, &png_ptr->gamma_16_table, shift, | 
 |           png_ptr->screen_gamma > 0 ? png_product2(png_ptr->colorspace.gamma, | 
 |           png_ptr->screen_gamma) : PNG_FP_1); | 
 |  | 
 |       else | 
 |           png_build_16bit_table(png_ptr, &png_ptr->gamma_16_table, shift, | 
 |           png_ptr->screen_gamma > 0 ? png_reciprocal2(png_ptr->colorspace.gamma, | 
 |           png_ptr->screen_gamma) : PNG_FP_1); | 
 |  | 
 | #if defined(PNG_READ_BACKGROUND_SUPPORTED) || \ | 
 |    defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \ | 
 |    defined(PNG_READ_RGB_TO_GRAY_SUPPORTED) | 
 |       if ((png_ptr->transformations & (PNG_COMPOSE | PNG_RGB_TO_GRAY)) != 0) | 
 |       { | 
 |          png_build_16bit_table(png_ptr, &png_ptr->gamma_16_to_1, shift, | 
 |              png_reciprocal(png_ptr->colorspace.gamma)); | 
 |  | 
 |          /* Notice that the '16 from 1' table should be full precision, however | 
 |           * the lookup on this table still uses gamma_shift, so it can't be. | 
 |           * TODO: fix this. | 
 |           */ | 
 |          png_build_16bit_table(png_ptr, &png_ptr->gamma_16_from_1, shift, | 
 |              png_ptr->screen_gamma > 0 ? png_reciprocal(png_ptr->screen_gamma) : | 
 |              png_ptr->colorspace.gamma/* Probably doing rgb_to_gray */); | 
 |       } | 
 | #endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */ | 
 |    } | 
 | #endif /* 16BIT */ | 
 | } | 
 | #endif /* READ_GAMMA */ | 
 |  | 
 | /* HARDWARE OR SOFTWARE OPTION SUPPORT */ | 
 | #ifdef PNG_SET_OPTION_SUPPORTED | 
 | int PNGAPI | 
 | png_set_option(png_structrp png_ptr, int option, int onoff) | 
 | { | 
 |    if (png_ptr != NULL && option >= 0 && option < PNG_OPTION_NEXT && | 
 |       (option & 1) == 0) | 
 |    { | 
 |       png_uint_32 mask = 3U << option; | 
 |       png_uint_32 setting = (2U + (onoff != 0)) << option; | 
 |       png_uint_32 current = png_ptr->options; | 
 |  | 
 |       png_ptr->options = (png_uint_32)((current & ~mask) | setting); | 
 |  | 
 |       return (int)(current & mask) >> option; | 
 |    } | 
 |  | 
 |    return PNG_OPTION_INVALID; | 
 | } | 
 | #endif | 
 |  | 
 | /* sRGB support */ | 
 | #if defined(PNG_SIMPLIFIED_READ_SUPPORTED) ||\ | 
 |    defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) | 
 | /* sRGB conversion tables; these are machine generated with the code in | 
 |  * contrib/tools/makesRGB.c.  The actual sRGB transfer curve defined in the | 
 |  * specification (see the article at https://en.wikipedia.org/wiki/SRGB) | 
 |  * is used, not the gamma=1/2.2 approximation use elsewhere in libpng. | 
 |  * The sRGB to linear table is exact (to the nearest 16-bit linear fraction). | 
 |  * The inverse (linear to sRGB) table has accuracies as follows: | 
 |  * | 
 |  * For all possible (255*65535+1) input values: | 
 |  * | 
 |  *    error: -0.515566 - 0.625971, 79441 (0.475369%) of readings inexact | 
 |  * | 
 |  * For the input values corresponding to the 65536 16-bit values: | 
 |  * | 
 |  *    error: -0.513727 - 0.607759, 308 (0.469978%) of readings inexact | 
 |  * | 
 |  * In all cases the inexact readings are only off by one. | 
 |  */ | 
 |  | 
 | #ifdef PNG_SIMPLIFIED_READ_SUPPORTED | 
 | /* The convert-to-sRGB table is only currently required for read. */ | 
 | const png_uint_16 png_sRGB_table[256] = | 
 | { | 
 |    0,20,40,60,80,99,119,139, | 
 |    159,179,199,219,241,264,288,313, | 
 |    340,367,396,427,458,491,526,562, | 
 |    599,637,677,718,761,805,851,898, | 
 |    947,997,1048,1101,1156,1212,1270,1330, | 
 |    1391,1453,1517,1583,1651,1720,1790,1863, | 
 |    1937,2013,2090,2170,2250,2333,2418,2504, | 
 |    2592,2681,2773,2866,2961,3058,3157,3258, | 
 |    3360,3464,3570,3678,3788,3900,4014,4129, | 
 |    4247,4366,4488,4611,4736,4864,4993,5124, | 
 |    5257,5392,5530,5669,5810,5953,6099,6246, | 
 |    6395,6547,6700,6856,7014,7174,7335,7500, | 
 |    7666,7834,8004,8177,8352,8528,8708,8889, | 
 |    9072,9258,9445,9635,9828,10022,10219,10417, | 
 |    10619,10822,11028,11235,11446,11658,11873,12090, | 
 |    12309,12530,12754,12980,13209,13440,13673,13909, | 
 |    14146,14387,14629,14874,15122,15371,15623,15878, | 
 |    16135,16394,16656,16920,17187,17456,17727,18001, | 
 |    18277,18556,18837,19121,19407,19696,19987,20281, | 
 |    20577,20876,21177,21481,21787,22096,22407,22721, | 
 |    23038,23357,23678,24002,24329,24658,24990,25325, | 
 |    25662,26001,26344,26688,27036,27386,27739,28094, | 
 |    28452,28813,29176,29542,29911,30282,30656,31033, | 
 |    31412,31794,32179,32567,32957,33350,33745,34143, | 
 |    34544,34948,35355,35764,36176,36591,37008,37429, | 
 |    37852,38278,38706,39138,39572,40009,40449,40891, | 
 |    41337,41785,42236,42690,43147,43606,44069,44534, | 
 |    45002,45473,45947,46423,46903,47385,47871,48359, | 
 |    48850,49344,49841,50341,50844,51349,51858,52369, | 
 |    52884,53401,53921,54445,54971,55500,56032,56567, | 
 |    57105,57646,58190,58737,59287,59840,60396,60955, | 
 |    61517,62082,62650,63221,63795,64372,64952,65535 | 
 | }; | 
 | #endif /* SIMPLIFIED_READ */ | 
 |  | 
 | /* The base/delta tables are required for both read and write (but currently | 
 |  * only the simplified versions.) | 
 |  */ | 
 | const png_uint_16 png_sRGB_base[512] = | 
 | { | 
 |    128,1782,3383,4644,5675,6564,7357,8074, | 
 |    8732,9346,9921,10463,10977,11466,11935,12384, | 
 |    12816,13233,13634,14024,14402,14769,15125,15473, | 
 |    15812,16142,16466,16781,17090,17393,17690,17981, | 
 |    18266,18546,18822,19093,19359,19621,19879,20133, | 
 |    20383,20630,20873,21113,21349,21583,21813,22041, | 
 |    22265,22487,22707,22923,23138,23350,23559,23767, | 
 |    23972,24175,24376,24575,24772,24967,25160,25352, | 
 |    25542,25730,25916,26101,26284,26465,26645,26823, | 
 |    27000,27176,27350,27523,27695,27865,28034,28201, | 
 |    28368,28533,28697,28860,29021,29182,29341,29500, | 
 |    29657,29813,29969,30123,30276,30429,30580,30730, | 
 |    30880,31028,31176,31323,31469,31614,31758,31902, | 
 |    32045,32186,32327,32468,32607,32746,32884,33021, | 
 |    33158,33294,33429,33564,33697,33831,33963,34095, | 
 |    34226,34357,34486,34616,34744,34873,35000,35127, | 
 |    35253,35379,35504,35629,35753,35876,35999,36122, | 
 |    36244,36365,36486,36606,36726,36845,36964,37083, | 
 |    37201,37318,37435,37551,37668,37783,37898,38013, | 
 |    38127,38241,38354,38467,38580,38692,38803,38915, | 
 |    39026,39136,39246,39356,39465,39574,39682,39790, | 
 |    39898,40005,40112,40219,40325,40431,40537,40642, | 
 |    40747,40851,40955,41059,41163,41266,41369,41471, | 
 |    41573,41675,41777,41878,41979,42079,42179,42279, | 
 |    42379,42478,42577,42676,42775,42873,42971,43068, | 
 |    43165,43262,43359,43456,43552,43648,43743,43839, | 
 |    43934,44028,44123,44217,44311,44405,44499,44592, | 
 |    44685,44778,44870,44962,45054,45146,45238,45329, | 
 |    45420,45511,45601,45692,45782,45872,45961,46051, | 
 |    46140,46229,46318,46406,46494,46583,46670,46758, | 
 |    46846,46933,47020,47107,47193,47280,47366,47452, | 
 |    47538,47623,47709,47794,47879,47964,48048,48133, | 
 |    48217,48301,48385,48468,48552,48635,48718,48801, | 
 |    48884,48966,49048,49131,49213,49294,49376,49458, | 
 |    49539,49620,49701,49782,49862,49943,50023,50103, | 
 |    50183,50263,50342,50422,50501,50580,50659,50738, | 
 |    50816,50895,50973,51051,51129,51207,51285,51362, | 
 |    51439,51517,51594,51671,51747,51824,51900,51977, | 
 |    52053,52129,52205,52280,52356,52432,52507,52582, | 
 |    52657,52732,52807,52881,52956,53030,53104,53178, | 
 |    53252,53326,53400,53473,53546,53620,53693,53766, | 
 |    53839,53911,53984,54056,54129,54201,54273,54345, | 
 |    54417,54489,54560,54632,54703,54774,54845,54916, | 
 |    54987,55058,55129,55199,55269,55340,55410,55480, | 
 |    55550,55620,55689,55759,55828,55898,55967,56036, | 
 |    56105,56174,56243,56311,56380,56448,56517,56585, | 
 |    56653,56721,56789,56857,56924,56992,57059,57127, | 
 |    57194,57261,57328,57395,57462,57529,57595,57662, | 
 |    57728,57795,57861,57927,57993,58059,58125,58191, | 
 |    58256,58322,58387,58453,58518,58583,58648,58713, | 
 |    58778,58843,58908,58972,59037,59101,59165,59230, | 
 |    59294,59358,59422,59486,59549,59613,59677,59740, | 
 |    59804,59867,59930,59993,60056,60119,60182,60245, | 
 |    60308,60370,60433,60495,60558,60620,60682,60744, | 
 |    60806,60868,60930,60992,61054,61115,61177,61238, | 
 |    61300,61361,61422,61483,61544,61605,61666,61727, | 
 |    61788,61848,61909,61969,62030,62090,62150,62211, | 
 |    62271,62331,62391,62450,62510,62570,62630,62689, | 
 |    62749,62808,62867,62927,62986,63045,63104,63163, | 
 |    63222,63281,63340,63398,63457,63515,63574,63632, | 
 |    63691,63749,63807,63865,63923,63981,64039,64097, | 
 |    64155,64212,64270,64328,64385,64443,64500,64557, | 
 |    64614,64672,64729,64786,64843,64900,64956,65013, | 
 |    65070,65126,65183,65239,65296,65352,65409,65465 | 
 | }; | 
 |  | 
 | const png_byte png_sRGB_delta[512] = | 
 | { | 
 |    207,201,158,129,113,100,90,82,77,72,68,64,61,59,56,54, | 
 |    52,50,49,47,46,45,43,42,41,40,39,39,38,37,36,36, | 
 |    35,34,34,33,33,32,32,31,31,30,30,30,29,29,28,28, | 
 |    28,27,27,27,27,26,26,26,25,25,25,25,24,24,24,24, | 
 |    23,23,23,23,23,22,22,22,22,22,22,21,21,21,21,21, | 
 |    21,20,20,20,20,20,20,20,20,19,19,19,19,19,19,19, | 
 |    19,18,18,18,18,18,18,18,18,18,18,17,17,17,17,17, | 
 |    17,17,17,17,17,17,16,16,16,16,16,16,16,16,16,16, | 
 |    16,16,16,16,15,15,15,15,15,15,15,15,15,15,15,15, | 
 |    15,15,15,15,14,14,14,14,14,14,14,14,14,14,14,14, | 
 |    14,14,14,14,14,14,14,13,13,13,13,13,13,13,13,13, | 
 |    13,13,13,13,13,13,13,13,13,13,13,13,13,13,12,12, | 
 |    12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12, | 
 |    12,12,12,12,12,12,12,12,12,12,12,12,11,11,11,11, | 
 |    11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11, | 
 |    11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11, | 
 |    11,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10, | 
 |    10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10, | 
 |    10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10, | 
 |    10,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9, | 
 |    9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9, | 
 |    9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9, | 
 |    9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9, | 
 |    9,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, | 
 |    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, | 
 |    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, | 
 |    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, | 
 |    8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, | 
 |    8,8,8,8,8,8,8,8,8,7,7,7,7,7,7,7, | 
 |    7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, | 
 |    7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, | 
 |    7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7 | 
 | }; | 
 | #endif /* SIMPLIFIED READ/WRITE sRGB support */ | 
 |  | 
 | /* SIMPLIFIED READ/WRITE SUPPORT */ | 
 | #if defined(PNG_SIMPLIFIED_READ_SUPPORTED) ||\ | 
 |    defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) | 
 | static int | 
 | png_image_free_function(png_voidp argument) | 
 | { | 
 |    png_imagep image = png_voidcast(png_imagep, argument); | 
 |    png_controlp cp = image->opaque; | 
 |    png_control c; | 
 |  | 
 |    /* Double check that we have a png_ptr - it should be impossible to get here | 
 |     * without one. | 
 |     */ | 
 |    if (cp->png_ptr == NULL) | 
 |       return 0; | 
 |  | 
 |    /* First free any data held in the control structure. */ | 
 | #  ifdef PNG_STDIO_SUPPORTED | 
 |       if (cp->owned_file != 0) | 
 |       { | 
 |          FILE *fp = png_voidcast(FILE*, cp->png_ptr->io_ptr); | 
 |          cp->owned_file = 0; | 
 |  | 
 |          /* Ignore errors here. */ | 
 |          if (fp != NULL) | 
 |          { | 
 |             cp->png_ptr->io_ptr = NULL; | 
 |             (void)fclose(fp); | 
 |          } | 
 |       } | 
 | #  endif | 
 |  | 
 |    /* Copy the control structure so that the original, allocated, version can be | 
 |     * safely freed.  Notice that a png_error here stops the remainder of the | 
 |     * cleanup, but this is probably fine because that would indicate bad memory | 
 |     * problems anyway. | 
 |     */ | 
 |    c = *cp; | 
 |    image->opaque = &c; | 
 |    png_free(c.png_ptr, cp); | 
 |  | 
 |    /* Then the structures, calling the correct API. */ | 
 |    if (c.for_write != 0) | 
 |    { | 
 | #     ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED | 
 |          png_destroy_write_struct(&c.png_ptr, &c.info_ptr); | 
 | #     else | 
 |          png_error(c.png_ptr, "simplified write not supported"); | 
 | #     endif | 
 |    } | 
 |    else | 
 |    { | 
 | #     ifdef PNG_SIMPLIFIED_READ_SUPPORTED | 
 |          png_destroy_read_struct(&c.png_ptr, &c.info_ptr, NULL); | 
 | #     else | 
 |          png_error(c.png_ptr, "simplified read not supported"); | 
 | #     endif | 
 |    } | 
 |  | 
 |    /* Success. */ | 
 |    return 1; | 
 | } | 
 |  | 
 | void PNGAPI | 
 | png_image_free(png_imagep image) | 
 | { | 
 |    /* Safely call the real function, but only if doing so is safe at this point | 
 |     * (if not inside an error handling context).  Otherwise assume | 
 |     * png_safe_execute will call this API after the return. | 
 |     */ | 
 |    if (image != NULL && image->opaque != NULL && | 
 |       image->opaque->error_buf == NULL) | 
 |    { | 
 |       png_image_free_function(image); | 
 |       image->opaque = NULL; | 
 |    } | 
 | } | 
 |  | 
 | int /* PRIVATE */ | 
 | png_image_error(png_imagep image, png_const_charp error_message) | 
 | { | 
 |    /* Utility to log an error. */ | 
 |    png_safecat(image->message, (sizeof image->message), 0, error_message); | 
 |    image->warning_or_error |= PNG_IMAGE_ERROR; | 
 |    png_image_free(image); | 
 |    return 0; | 
 | } | 
 |  | 
 | #endif /* SIMPLIFIED READ/WRITE */ | 
 | #endif /* READ || WRITE */ |