| /* |
| * The copyright in this software is being made available under the 2-clauses |
| * BSD License, included below. This software may be subject to other third |
| * party and contributor rights, including patent rights, and no such rights |
| * are granted under this license. |
| * |
| * Copyright (c) 2002-2014, Universite catholique de Louvain (UCL), Belgium |
| * Copyright (c) 2002-2014, Professor Benoit Macq |
| * Copyright (c) 2001-2003, David Janssens |
| * Copyright (c) 2002-2003, Yannick Verschueren |
| * Copyright (c) 2003-2007, Francois-Olivier Devaux |
| * Copyright (c) 2003-2014, Antonin Descampe |
| * Copyright (c) 2005, Herve Drolon, FreeImage Team |
| * Copyright (c) 2012, Carl Hetherington |
| * Copyright (c) 2017, IntoPIX SA <support@intopix.com> |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS `AS IS' |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #ifndef OPJ_T1_H |
| #define OPJ_T1_H |
| /** |
| @file t1.h |
| @brief Implementation of the tier-1 coding (coding of code-block coefficients) (T1) |
| |
| The functions in T1.C have for goal to realize the tier-1 coding operation. The functions |
| in T1.C are used by some function in TCD.C. |
| */ |
| |
| /** @defgroup T1 T1 - Implementation of the tier-1 coding */ |
| /*@{*/ |
| |
| /* ----------------------------------------------------------------------- */ |
| #define T1_NMSEDEC_BITS 7 |
| |
| #define T1_NUMCTXS_ZC 9 |
| #define T1_NUMCTXS_SC 5 |
| #define T1_NUMCTXS_MAG 3 |
| #define T1_NUMCTXS_AGG 1 |
| #define T1_NUMCTXS_UNI 1 |
| |
| #define T1_CTXNO_ZC 0 |
| #define T1_CTXNO_SC (T1_CTXNO_ZC+T1_NUMCTXS_ZC) |
| #define T1_CTXNO_MAG (T1_CTXNO_SC+T1_NUMCTXS_SC) |
| #define T1_CTXNO_AGG (T1_CTXNO_MAG+T1_NUMCTXS_MAG) |
| #define T1_CTXNO_UNI (T1_CTXNO_AGG+T1_NUMCTXS_AGG) |
| #define T1_NUMCTXS (T1_CTXNO_UNI+T1_NUMCTXS_UNI) |
| |
| #define T1_NMSEDEC_FRACBITS (T1_NMSEDEC_BITS-1) |
| |
| #define T1_TYPE_MQ 0 /**< Normal coding using entropy coder */ |
| #define T1_TYPE_RAW 1 /**< No encoding the information is store under raw format in codestream (mode switch RAW)*/ |
| |
| /* BEGINNING of flags that apply to opj_flag_t */ |
| /** We hold the state of individual data points for the T1 encoder using |
| * a single 32-bit flags word to hold the state of 4 data points. This corresponds |
| * to the 4-point-high columns that the data is processed in. |
| * |
| * These \#defines declare the layout of a 32-bit flags word. |
| * |
| * This is currently done for encoding only. |
| * The values must NOT be changed, otherwise this is going to break a lot of |
| * assumptions. |
| */ |
| |
| /* SIGMA: significance state (3 cols x 6 rows) |
| * CHI: state for negative sample value (1 col x 6 rows) |
| * MU: state for visited in refinement pass (1 col x 4 rows) |
| * PI: state for visited in significance pass (1 col * 4 rows) |
| */ |
| |
| #define T1_SIGMA_0 (1U << 0) |
| #define T1_SIGMA_1 (1U << 1) |
| #define T1_SIGMA_2 (1U << 2) |
| #define T1_SIGMA_3 (1U << 3) |
| #define T1_SIGMA_4 (1U << 4) |
| #define T1_SIGMA_5 (1U << 5) |
| #define T1_SIGMA_6 (1U << 6) |
| #define T1_SIGMA_7 (1U << 7) |
| #define T1_SIGMA_8 (1U << 8) |
| #define T1_SIGMA_9 (1U << 9) |
| #define T1_SIGMA_10 (1U << 10) |
| #define T1_SIGMA_11 (1U << 11) |
| #define T1_SIGMA_12 (1U << 12) |
| #define T1_SIGMA_13 (1U << 13) |
| #define T1_SIGMA_14 (1U << 14) |
| #define T1_SIGMA_15 (1U << 15) |
| #define T1_SIGMA_16 (1U << 16) |
| #define T1_SIGMA_17 (1U << 17) |
| |
| #define T1_CHI_0 (1U << 18) |
| #define T1_CHI_0_I 18 |
| #define T1_CHI_1 (1U << 19) |
| #define T1_CHI_1_I 19 |
| #define T1_MU_0 (1U << 20) |
| #define T1_PI_0 (1U << 21) |
| #define T1_CHI_2 (1U << 22) |
| #define T1_CHI_2_I 22 |
| #define T1_MU_1 (1U << 23) |
| #define T1_PI_1 (1U << 24) |
| #define T1_CHI_3 (1U << 25) |
| #define T1_MU_2 (1U << 26) |
| #define T1_PI_2 (1U << 27) |
| #define T1_CHI_4 (1U << 28) |
| #define T1_MU_3 (1U << 29) |
| #define T1_PI_3 (1U << 30) |
| #define T1_CHI_5 (1U << 31) |
| #define T1_CHI_5_I 31 |
| |
| /** As an example, the bits T1_SIGMA_3, T1_SIGMA_4 and T1_SIGMA_5 |
| * indicate the significance state of the west neighbour of data point zero |
| * of our four, the point itself, and its east neighbour respectively. |
| * Many of the bits are arranged so that given a flags word, you can |
| * look at the values for the data point 0, then shift the flags |
| * word right by 3 bits and look at the same bit positions to see the |
| * values for data point 1. |
| * |
| * The \#defines below help a bit with this; say you have a flags word |
| * f, you can do things like |
| * |
| * (f & T1_SIGMA_THIS) |
| * |
| * to see the significance bit of data point 0, then do |
| * |
| * ((f >> 3) & T1_SIGMA_THIS) |
| * |
| * to see the significance bit of data point 1. |
| */ |
| |
| #define T1_SIGMA_NW T1_SIGMA_0 |
| #define T1_SIGMA_N T1_SIGMA_1 |
| #define T1_SIGMA_NE T1_SIGMA_2 |
| #define T1_SIGMA_W T1_SIGMA_3 |
| #define T1_SIGMA_THIS T1_SIGMA_4 |
| #define T1_SIGMA_E T1_SIGMA_5 |
| #define T1_SIGMA_SW T1_SIGMA_6 |
| #define T1_SIGMA_S T1_SIGMA_7 |
| #define T1_SIGMA_SE T1_SIGMA_8 |
| #define T1_SIGMA_NEIGHBOURS (T1_SIGMA_NW | T1_SIGMA_N | T1_SIGMA_NE | T1_SIGMA_W | T1_SIGMA_E | T1_SIGMA_SW | T1_SIGMA_S | T1_SIGMA_SE) |
| |
| #define T1_CHI_THIS T1_CHI_1 |
| #define T1_CHI_THIS_I T1_CHI_1_I |
| #define T1_MU_THIS T1_MU_0 |
| #define T1_PI_THIS T1_PI_0 |
| #define T1_CHI_S T1_CHI_2 |
| |
| #define T1_LUT_SGN_W (1U << 0) |
| #define T1_LUT_SIG_N (1U << 1) |
| #define T1_LUT_SGN_E (1U << 2) |
| #define T1_LUT_SIG_W (1U << 3) |
| #define T1_LUT_SGN_N (1U << 4) |
| #define T1_LUT_SIG_E (1U << 5) |
| #define T1_LUT_SGN_S (1U << 6) |
| #define T1_LUT_SIG_S (1U << 7) |
| /* END of flags that apply to opj_flag_t */ |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| /** Flags for 4 consecutive rows of a column */ |
| typedef OPJ_UINT32 opj_flag_t; |
| |
| /** |
| Tier-1 coding (coding of code-block coefficients) |
| */ |
| typedef struct opj_t1 { |
| |
| /** MQC component */ |
| opj_mqc_t mqc; |
| |
| OPJ_INT32 *data; |
| /** Flags used by decoder and encoder. |
| * Such that flags[1+0] is for state of col=0,row=0..3, |
| flags[1+1] for col=1, row=0..3, flags[1+flags_stride] for col=0,row=4..7, ... |
| This array avoids too much cache trashing when processing by 4 vertical samples |
| as done in the various decoding steps. */ |
| opj_flag_t *flags; |
| |
| OPJ_UINT32 w; |
| OPJ_UINT32 h; |
| OPJ_UINT32 datasize; |
| OPJ_UINT32 flagssize; |
| OPJ_BOOL encoder; |
| |
| /* The 3 variables below are only used by the decoder */ |
| /* set to TRUE in multithreaded context */ |
| OPJ_BOOL mustuse_cblkdatabuffer; |
| /* Temporary buffer to concatenate all chunks of a codebock */ |
| OPJ_BYTE *cblkdatabuffer; |
| /* Maximum size available in cblkdatabuffer */ |
| OPJ_UINT32 cblkdatabuffersize; |
| } opj_t1_t; |
| |
| /** @name Exported functions */ |
| /*@{*/ |
| /* ----------------------------------------------------------------------- */ |
| |
| /** |
| Encode the code-blocks of a tile |
| @param tcd TCD handle |
| @param tile The tile to encode |
| @param tcp Tile coding parameters |
| @param mct_norms FIXME DOC |
| @param mct_numcomps Number of components used for MCT |
| */ |
| OPJ_BOOL opj_t1_encode_cblks(opj_tcd_t* tcd, |
| opj_tcd_tile_t *tile, |
| opj_tcp_t *tcp, |
| const OPJ_FLOAT64 * mct_norms, |
| OPJ_UINT32 mct_numcomps); |
| |
| /** |
| Decode the code-blocks of a tile |
| @param tcd TCD handle |
| @param pret Pointer to return value |
| @param tilec The tile to decode |
| @param tccp Tile coding parameters |
| @param p_manager the event manager |
| @param p_manager_mutex mutex for the event manager |
| @param check_pterm whether PTERM correct termination should be checked |
| */ |
| void opj_t1_decode_cblks(opj_tcd_t* tcd, |
| volatile OPJ_BOOL* pret, |
| opj_tcd_tilecomp_t* tilec, |
| opj_tccp_t* tccp, |
| opj_event_mgr_t *p_manager, |
| opj_mutex_t* p_manager_mutex, |
| OPJ_BOOL check_pterm); |
| |
| |
| |
| /** |
| * Creates a new Tier 1 handle |
| * and initializes the look-up tables of the Tier-1 coder/decoder |
| * @return a new T1 handle if successful, returns NULL otherwise |
| */ |
| opj_t1_t* opj_t1_create(OPJ_BOOL isEncoder); |
| |
| /** |
| * Destroys a previously created T1 handle |
| * |
| * @param p_t1 Tier 1 handle to destroy |
| */ |
| void opj_t1_destroy(opj_t1_t *p_t1); |
| /* ----------------------------------------------------------------------- */ |
| /*@}*/ |
| |
| /*@}*/ |
| |
| #endif /* OPJ_T1_H */ |